1. Introduction
Thank you for choosing the Baofeng UV-5RH multi-functional FM handheld transceiver. This product combines the latest radio communication technology with a robust mechanical design, offering convenience for both professional users (e.g., pastoral areas, farms, self-driving tours, hunting, forest protection, tactical training) and casual users who wish to stay connected with friends and family.
To prevent personal injury or property damage due to improper operation, please read all information carefully before using this product. To ensure you maximize the benefits of this product, please read this manual and the 'Safety Information Manual' thoroughly before use.
2. Safety Information
2.1. Important Information & RF Radiation Control
Warning: Purchasing and using this device constitutes setting up and using a radio station. In the People's Republic of China, setting up and using a radio station must be approved according to the national and local 'Radio Management Regulations' and a radio station license must be obtained. During use, the equipment must operate according to the approved items on the radio station license. Unauthorized setup and use of radio stations, interference with radio services, failure to operate according to approved items, and other violations of radio management regulations will be subject to administrative penalties by radio management agencies. Serious violations may also constitute a violation of Article 288 of the 'Criminal Law' or Article 28 of the 'Public Security Administration Punishment Law', resulting in imprisonment of less than three years or detention of less than fifteen days by public security organs.
Unauthorized changes or modifications to this device may void your authority to operate it. Your walkie-talkie is set to transmit modulated signals on specified frequencies. Changing or adjusting the settings within this unit beyond these limits is illegal. Any adjustments to this unit must be performed by qualified technical personnel.
Before using this walkie-talkie, please carefully read the operating instructions for safe use of the walkie-talkie in the RF Radiation and Product Safety section.
2.2. RF Radiation Information
This product is limited to occupational applications that meet RF energy radiation requirements. Users must understand the hazards of RF radiation and take appropriate measures to meet RF radiation limits.
RF Radiation Common Sense
RF refers to electromagnetic frequencies that can radiate into space. It is a widely used technology in communication, medical, food processing, and other fields, and will generate certain RF radiation during use.
RF Radiation Control and Operating Instructions
To ensure optimal performance and compliance with occupational or controlled environment radiation limits, transmission time should not exceed 50% of the rated duty cycle (maximum 50% transmission time). Please follow these instructions:
- RF energy radiation is generated only during transmission (speaking); it is not generated during reception (listening) and standby.
- Maintain a distance of at least 2.5 cm between the terminal and your body during transmission.
2.3. Prohibited Uses
Do not use this product in the following places or situations to avoid property damage or personal injury:
- In places where fuel, chemicals, explosive gases, and other flammable and explosive materials are stored. Do not use this product or charge its battery. Unless certified explosion-proof and intact, any disassembly or installation is prohibited.
- Do not use this product in or near blasting areas.
- Do not use this product near medical equipment or electronic devices sensitive to RF signals.
- Do not hold this product while driving.
- Do not use this product in other places where wireless communication devices are prohibited.
- Turn off the walkie-talkie before boarding an aircraft; any use of the walkie-talkie must comply with airline regulations or crew instructions.
2.4. Precautions for Use
During the use of this product, please observe the following precautions to avoid property damage or personal injury:
- Do not use unapproved or damaged accessories.
- When transmitting with the walkie-talkie, hold it vertically and keep the microphone 3 to 4 cm from your mouth. During transmission, the antenna should be at least 2.5 cm from your body.
- Do not receive at high volume for extended periods.
- Do not place this product above an airbag or in an area where an airbag may deploy.
- Do not place this product and its accessories within reach of children and pets.
- Use this product within the specified operating temperature range.
- Prolonged transmission may cause the device to heat up; allow it to cool down.
- Always press keys with moderate force; avoid excessive force.
- Do not disassemble, modify, or repair this product and its accessories without authorization.
2.5. Battery Safety Precautions
Prohibited Charging
Do not charge in the following places or situations to avoid property damage or personal injury:
- In places where fuel, chemicals, explosive gases, and other flammable and explosive materials are stored. Do not charge or replace the battery.
- If the battery or terminal is accidentally wet, wipe it dry with a clean cloth before charging, otherwise charging is prohibited.
- If the battery leaks, deforms, or overheats, charging is prohibited.
- Do not use unapproved chargers for charging.
- Do not charge near strong radiation sources.
- Do not overcharge the battery, as this will affect battery life.
Maintenance Instructions
To ensure normal battery operation and extend its life, please observe the following precautions:
- Dust on the battery contacts may affect normal charging, so please clean the battery contacts promptly with a clean, dry cloth.
- It is recommended that the charging ambient temperature be between 5°C and 40°C; charging at too high or too low temperatures will shorten battery life and may even cause leakage.
- If charging a terminal with a battery installed, it is recommended to turn off its power during charging to ensure normal battery charging.
- Do not plug or unplug the power supply and battery during charging to avoid interfering with normal charging.
- Do not dispose of batteries in fire.
- Do not expose the battery to direct sunlight for long periods or place it near other heat sources.
- Do not squeeze, puncture, or disassemble the battery casing.
Transportation Instructions
- Do not transport damaged batteries.
- Ensure that the battery in the package is not short-circuited. If there are multiple batteries in the same package, pack each battery separately.
- If the walkie-talkie contains a battery, it must be turned off and measures taken to prevent accidental activation.
The shipping documents should list the details of the items being shipped, and the package should be marked with a battery shipping label. For local laws, regulations, and other information, please consult your carrier.
3. Package Contents
The package contains the following items. If any items are missing or damaged, please contact the dealer of the product you purchased.
Standard Package:
- 1 x Main Unit (Walkie Talkie)
- 1 x Li-ion Battery Pack
- 1 x Intelligent Desktop Charger
- 1 x Belt Clip
- 1 x High Gain Antenna
- 1 x Lanyard
- 1 x User Manual
Additional Items (depending on variant):
- Type-C USB Charging Cable (for direct battery charging)
- Headset
- H-771 Antenna
- H-48cm Antenna
- H-771-Cable
Note: For antenna frequency bands, please refer to the color ring label at the bottom of the antenna. If the label does not specify the frequency band, refer to the specific frequency band on the main unit label.
4. Product Overview
Familiarize yourself with the parts of your walkie-talkie:
4.1. Key Features
- Frequency Range: FM Radio 65-108MHz (Rx); 108-136MHz (Air Band Rx); 350-390MHz (Rx); 136-174MHz (Rx/Tx); 220-260MHz (Rx/Tx); 400-480MHz (Rx/Tx); 480-520MHz (Rx).
- Channels: 999 memory channels.
- Power Output: 10W (High Power). Adjustable to High, Medium, Low.
- Display: 1.77" Color Large Screen.
- Charging: Type-C direct charging and base charger options.
- Special Functions: Wireless Copy Frequency, VOX Function, FM Radio, LED Flashlight, Sound and Light Alarm (three types), DTMF encoding/decoding, Keypad Lock, LCD backlight, Keypad backlight.
- NOAA Weather: Supports US and Canadian NOAA weather reception.
- Repeater Settings: Frequency difference, direction, reverse frequency, repeater activation tones (1750Hz, 1450Hz, 2100Hz, 1000Hz).
- User Customization: Startup image, startup password, channel display mode, key tone, transmission end tone, Chinese/English menu and language settings.
Note: BF-5RH series products are divided into M and L versions. The M version has Air Band AM108-136MHz and Police Band 350-390MHz scan reception and scramble function. The L version does not support voice scramble function, Air Band AM108-136MHz, or Police Band 350-390MHz scan reception.
4.2. Parts Diagram
For a detailed numbered parts diagram, please refer to the official user manual PDF. A general overview of controls includes:
- Power/Volume Switch
- FM Radio/Emergency Alarm Switch
- PTT (Push-to-Talk) Transmit Key
- VFO/MR Mode Key
- RX_TX Indicator Light
- Flashlight/Monitor Key
- A/B Up/Down Frequency Switch Key
- Menu Key
- Numeric Keypad
- Antenna Interface
- LED Flashlight
- Color LCD Screen (1.77 inches)
- Accessory Interface (External Headset/Programming Interface)
- Speaker
- Scan Key
- Exit Key
- Up/Down Navigation Keys
- Type-C Charging Port
- Charging Indicator Light
- Battery Lock Door
5. Setup
5.1. Installing the Antenna
Rotate the antenna clockwise until it is tight. To remove, rotate counter-clockwise.
Caution: Do not hold the antenna and swing the product, as this will reduce the antenna's performance and lifespan.
5.2. Installing the Belt Clip
Use the two included screws to attach the belt clip to the back of the walkie-talkie.
5.3. Installing/Removing the Battery Pack
Before installing or removing the battery, ensure the walkie-talkie is completely turned off by rotating the power/volume knob counter-clockwise.
To Install the Battery Pack:
- With the back of the walkie-talkie facing you, insert the protrusions on the top of the Li-ion battery pack into the slots on the back of the walkie-talkie.
- Press the bottom of the battery down and tighten the fixing screw.
To Remove the Battery Pack:
- With the back of the walkie-talkie facing you, loosen the fixing screw until it separates from the body.
- Lift the bottom of the battery and pull it backward until the battery pack is completely separated from the walkie-talkie.
5.4. Charging the Battery Pack
Caution: Always ensure the product is turned off when charging.
Use the designated charging cradle to charge the battery. The indicator light on the charging cradle shows the charging status (see table below).
- Plug the power adapter into a power outlet.
- Plug the other end of the power adapter into the jack on the back of the charging cradle.
- Place the battery or the product with the battery correctly into the charging cradle.
The indicator light on the charging cradle shows the charging status. When the indicator light is red, charging has started. When the indicator light turns green, charging is complete.
Charging Status Indicator:
| LED Indicator Color | Status |
|---|---|
| Green LED (slow flash) | Standby (no load) |
| Red LED (solid) | Charging |
| Green LED (solid) | Charging Complete |
Notes:
- For optimal battery performance, charge for at least 4 hours during the first charge.
- Refer to the 'Safety Information Manual' for necessary battery safety information.
Battery Level Indication
You can check the remaining battery level using the battery symbol on the screen.
| Battery Icon | Battery Level |
|---|---|
| [Full Battery Icon] | High |
| [Medium Battery Icon] | Medium |
| [Low Battery Icon] | Low |
| [Empty Battery Icon] | Insufficient |
5.5. Installing Audio Accessories
- Lift the accessory port cover.
- Align the accessory plug with the accessory port and push it in firmly.
Caution: Ensure proper installation of accessories, otherwise, the external headset or walkie-talkie programming may be affected.
6. Basic Operation
6.1. Power On/Off
To power on, rotate the [Power/Volume Control] knob clockwise until you hear a "click" and a short prompt tone. To power off, rotate the knob counter-clockwise until you hear a "click".
6.2. Adjusting Volume
After powering on, rotate the [Power/Volume Control] knob clockwise to increase the voice reception volume, and counter-clockwise to decrease it.
6.3. Channel and Frequency Mode Selection
In standby mode, press the [VFO/MR] key to switch between Channel Mode and Frequency Mode.
- In Channel Mode, the channel number will be displayed on the right.
- In Frequency Mode, "VFO" will be displayed on the right.
6.4. Frequency Input
In VFO mode, there are two ways to input frequencies:
Method 1: Press the ▲ or ▼ keys to input the desired frequency using preset step frequencies.
Method 2: Manually input precise frequencies using the numeric keypad.
Example: To set the operating frequency to 144.97500, sequentially input [1][4][4][9][7][5]. The screen will display 144.97500 VFO.
Step Frequency Setting Path: Press MENU + 1 (Step Frequency) >> Set step frequency 2.5/5.0/6.25/10.0/12.5/20.0/25.0/50.0/100KHz.
6.5. Channel Selection
In Channel Mode, directly press the ▲ or ▼ keys to select channels up or down. Long press the ▲ or ▼ keys to quickly switch channels up or down. When the voice prompt function is enabled, the corresponding channel will be announced.
6.6. Initiating a Call (PTT)
To ensure optimal reception volume, maintain a distance of 2.5 cm to 5 cm between the microphone and your mouth during transmission.
- To Transmit: After selecting the channel, press and hold the [PTT] key. The walkie-talkie will be in transmit mode, and the red indicator light will be solid. Then speak into the microphone with a normal tone.
- To Receive: Release the [PTT] key. An end-of-transmission tone will sound. The walkie-talkie will be in receive mode. When receiving a call, the green indicator light will be solid.
Note: In Frequency Mode, input the allowed operating frequency using the numeric keypad, then press and hold the [PTT] key. The walkie-talkie will be in transmit mode, and the red indicator light will be solid. Then speak into the microphone with a normal tone.
6.7. Monitoring Function
In standby mode, press the [SK2] key to activate the monitor function. Release the [SK2] key to exit the monitor function.
6.8. Keypad Lock
When the numeric keypad is unlocked, long press the # key to lock the keypad. The LOCK icon will appear on the top line of the screen. When the numeric keypad is locked, long press the # key again to unlock the keypad.
6.9. LCD Display Icons
| Icon | Description |
|---|---|
| RSSI | Signal strength indicator. |
| H | Current transmit power is high (maximum communication distance, maximum power consumption). |
| L | Current transmit power is low (most power-saving, relatively short distance). |
| ♪ | This symbol appears when the side tone switch is set to key side tone/key + ID code/ID code. |
| DCS | This symbol indicates that the current sub-tone is digital sub-tone. |
| CT | This symbol indicates that the current sub-tone is analog sub-tone. |
| + | Appears in frequency mode, indicating that the transmit frequency is the receive frequency plus a frequency difference. The frequency difference is set in menu item 28. |
| - | Appears in frequency mode, indicating that the transmit frequency is the receive frequency minus a frequency difference. The frequency difference is set in menu item 28. |
| D | This symbol appears indicating that dual watch is enabled and in dual watch state, allowing simultaneous monitoring of two frequency points displayed on the screen. |
| [Lock Icon] | Appears when the keypad is locked; press and hold the # key to unlock, and the symbol disappears. |
| [VOX Icon] | Indicates that the voice-activated transmit function is enabled. Transmission starts when the microphone sound pressure level reaches the set value. |
| R | Receive and transmit frequencies are reversed in frequency mode/channel mode. |
| N | This symbol appears when the channel operates in narrow band mode. |
| [Battery Icons] | Displays the remaining battery power; full battery indicator; low battery indicator; battery nearly depleted, the outer frame of this icon flashes, at which point the walkie-talkie is prohibited from transmitting. |
| Work Frequency | A/B band operating frequency. |
| [Arrow Icon] | A/B band pointer. |
| Numeric Sequence | In channel mode, A/B band channel number. |
6.10. LED Status Indicators
| LED Indicator Color | Status Description |
|---|---|
| Green (solid) | Receiving Signal |
| Red (solid) | Transmitting Signal |
7. Advanced Features
7.1. FM Radio Function
To activate the FM radio, short press the [SK1] key. To search for channels, press ▲ or ▼ to search by preset step frequencies, or press MENU to automatically search. Press [SK1] again to exit radio mode.
7.2. Alarm Function
To activate the alarm, long press the [SK1] key. The alarm will sound.
Note: Alarm mode can be set via Menu 32. You can choose between local alarm, transmit alarm tone, or transmit alarm code.
7.3. LED Flashlight Function
To turn on the flashlight, short press the [SK2] key once. Short press [SK2] twice for flashing light. Short press [SK2] again to turn off the flashlight.
7.4. Repeater Activation Tone
When the walkie-talkie is in repeater mode, even if the channel is locked, you can activate the repeater by transmitting an activation tone. To do this, turn on the walkie-talkie, press and hold the [PTT] key, then press [SK2] to transmit a 1750Hz tone.
Note: Repeater activation tones can be set via Menu 37. You can choose from 1000Hz, 1450Hz, 1750Hz, and 2100Hz.
7.5. Reverse Frequency Function
In standby mode, short press the R key to reverse the receive and transmit frequencies. The screen will display "R" at the top. This function is commonly used for repeater channels.
7.6. Stopwatch Function
- Press MENU to enter the function menu.
- Input [4][4] to enter Menu 44 (Stopwatch).
- Press ▲ or ▼ to select Menu 44.
- Press MENU to start the stopwatch.
- Press MENU again to stop the stopwatch.
- Press EXIT to exit the stopwatch function.
7.7. One-Key Scan
This unit acts as a receiver, allowing it to scan radio frequencies from the air and store the scanned frequencies and sub-tones into channels. To do this:
- Long press the SCAN key to enter scan mode. The screen will display "SCAN SEARCH...".
- When a transmitter continuously transmits, this unit will receive effective frequencies (strongest and most stable signal) and display the received frequency.
- If there is a sub-tone, the sub-tone value will be displayed. If there is no sub-tone, "NONE" will be displayed.
- You can press the MENU key to save the scanned frequency and sub-tone to a channel.
Note: During scanning, press the VFO/MR key to switch between UHF or VHF bands. During scanning, the distance between the transmitter and receiver should be maintained at 0.5-1 meter.
7.8. Channel Scan
In Channel Mode, long press the SCAN key to enter channel scan mode. The walkie-talkie will scan between added channels. When an active channel is found, it will automatically stop on that active channel until the channel becomes idle. After 5 seconds of idle time, scanning resumes.
When stopping on an active channel, press the [PTT] key to initiate a call. Press EXIT to exit scanning.
Note: The scan resume method can be set via Menu 21. There are three resume methods: Time, Carrier, and Search.
7.9. Frequency Scan
In VFO mode, input a frequency (a known frequency) via the keypad, then long press the SCAN key to enter frequency scan mode. The walkie-talkie will scan according to the preset step frequency, and the LCD screen will jump with the preset step frequency. When an active frequency point is found, it will automatically stop on that active frequency point until it becomes idle. After 5 seconds of idle time, scanning resumes. Press EXIT to exit scanning.
7.10. Sub-tone Scan
In Frequency Mode, ensure the receive frequency is set correctly before performing sub-tone scanning to ensure signals can be received on that frequency. Disable dual watch function via Menu 07 (Dual Watch) before scanning.
7.10.1. Analog Sub-tone Scan
- In Frequency Mode, input the correct receive frequency using the numeric keypad.
- Press MENU to enter the function menu.
- Input [1][4] to enter Menu 14 (Scan Analog Sub-tone).
- Press ▲ or ▼ to select Menu 14.
- Press MENU to start analog sub-tone scanning.
When the analog sub-tone numbers change, it indicates that the machine has entered analog sub-tone scanning mode. The analog sub-tone numbers will quickly change according to the standard sub-tone sequence. When the machine identifies a receive signal with a sub-tone that matches one of the standard analog sub-tones, the machine will stop scanning and receive the voice. Press EXIT to exit analog sub-tone scanning.
7.10.2. Digital Sub-tone Scan
- In Frequency Mode, input the correct receive frequency using the numeric keypad.
- Press MENU to enter the function menu.
- Input [1][5] to enter Menu 15 (Scan Digital Sub-tone).
- Press ▲ or ▼ to select Menu 15.
- Press MENU to start digital sub-tone scanning.
When the digital sub-tone numbers change, it indicates that the machine has entered digital sub-tone scanning mode. The digital sub-tone numbers will quickly change according to the standard digital sub-tone sequence. When the machine identifies a receive signal with a sub-tone that matches one of the standard digital sub-tones, the machine will stop scanning and receive the voice. Press EXIT to exit digital sub-tone scanning.
7.11. VOX (Voice Operated Transmit)
With VOX enabled, you don't need to press the PTT key to transmit. It automatically transmits when you speak normally and stops transmitting when you stop speaking, then waits to receive. This function is useful in situations where users cannot free their hands to press the PTT key. To use:
- Press MENU to enter the function menu.
- Input [4] to enter Menu 4 (VOX Level).
- Press ▲ or ▼ to select Menu 4.
- Press MENU to enter VOX level settings. A voice prompt will say "VOX transmit". Press ▲ or ▼ to select 1-9 (higher value means higher sensitivity; e.g., select 3).
When VOX is enabled, the VOX icon will appear at the top of the screen. Press MENU to save and return to the previous menu.
To disable VOX, repeat the above steps and select "OFF". The VOX icon will disappear. The default is OFF.
Note: After enabling VOX, speak into the microphone to transmit; stop speaking, and transmission will stop. You can choose the VOX sensitivity level based on the ambient noise level. If the ambient noise is too high, enabling VOX may result in continuous transmission.
7.12. Dual Watch
When in Dual Watch mode, the walkie-talkie can receive frequencies set in A or B channels. To set up:
- Press MENU to enter the function menu.
- Input [7] to enter Menu 7 (Dual Watch).
- Press ▲ or ▼ to select Menu 7.
- Press MENU to enter Dual Watch settings. A voice prompt will say "Dual Watch". Press ▲ or ▼ to select ON.
- Press MENU to save and return to the previous menu. Dual Watch function is activated, and the D icon will appear on the top line of the screen.
To disable, repeat the above steps and select OFF. The D icon will disappear.
7.13. Voice Scramble
The scramble function is a voice inversion feature that enables private communication by scrambling voice signals. This prevents users without a descrambler or compatible unit from understanding the conversation. Only when both the transmitter and receiver have the same scramble frequency enabled can calls be received clearly on the current channel, ensuring communication privacy. To use:
- Press MENU to enter the function menu.
- Input [4][5] to enter Menu 45 (Voice Scramble).
- Press ▲ or ▼ to select Menu 45.
- Press MENU to enter voice scramble settings. You can choose from:
- OFF: Disable scramble function.
- MODE1/MODE2/MODE3.
- Press MENU to save settings and return to the previous menu.
Ensure that other radios you are communicating with use the same scramble mode. When scramble is enabled, the SCR icon will be displayed.
Note: Voice scramble function is an optional feature. The L version does not have this function. This option will not be available in the menu.
7.14. Channel Deletion
You may want to delete a stored channel due to incorrect settings or other changes. To do this:
- Press MENU to enter the function menu.
- Input [3][1] to enter Menu 31 (Channel Delete).
- Press ▲ or ▼ to select Menu 31.
- Press MENU to enter channel deletion operation. Press ▲ or ▼ to select the channel to delete.
- If the numeric prefix displays "CH-", it means the channel number originally had channel parameters and can be deleted.
- If the numeric prefix does not display "CH-", it means the channel number is empty and does not need to be deleted; it can be directly stored.
Press MENU to confirm the deletion of stored channel parameters, save, and return to the previous menu.
If it is an empty channel, press EXIT to directly return to the previous menu (no "Confirm" voice prompt).
7.15. Manual Programming (Frequency Mode & Channel Mode)
A complete channel includes parameters such as receive frequency, transmit frequency, receive sub-tone, transmit sub-tone, transmit power, channel bandwidth, PTT-ID, busy lock, signaling code, scan add, and channel name. Except for scan add and channel name, which need to be edited by programming software, other parameters can be set in Frequency Mode and then stored into the specified channel number via Menu 30.
Frequency Mode (VFO Mode) vs. Channel Mode (MR Mode)
In standby mode, press the [VFO/MR] key to switch between Frequency Mode and Channel Mode. Frequency Mode is the basic mode for frequency editing.
Example 1: Programming a Repeater Channel with Analog Sub-tone (CTCSS)
Example: Create a new stored channel in channel 10.
Receive Frequency: 432.55000, Transmit Frequency: 437.55000 (Frequency Difference +5.0MHz), Transmit Sub-tone: 123.0
Operating Steps:
- Press EXIT to exit the menu, press [VFO/MR] to switch to Frequency Mode, "VFO" is displayed on the right.
- Sequentially press the keypad: [3][1] MENU [1][0] MENU (Delete existing data for channel 10, if any).
- Press MENU [1][2] MENU [1][2][3] MENU (Select transmit analog sub-tone, e.g., CTCSS: 123.0).
- Input receive frequency (e.g., 43255000).
- Press MENU [3][0] MENU [1][0] MENU (Enter channel storage, e.g., channel 10). Receive frequency is added.
- Press EXIT to return.
- Input transmit frequency (e.g., 437.55000).
- Press MENU [3][0] MENU [1][0] MENU (Enter the same channel storage, e.g., channel 10). Transmit frequency is added.
- Press EXIT to return.
- Press [VFO/MR] to switch to Channel Mode, the channel number will reappear on the right.
Example 2: Programming a Simplex Channel with Analog Sub-tone (Same Receive/Transmit Frequency)
Example: Create a new stored channel in channel 10.
Receive and Transmit Frequency: 432.66250 (TX_RX same frequency), Transmit Sub-tone: 123.0
Operating Steps:
- Press EXIT to exit the menu, press [VFO/MR] to switch to Frequency Mode, "VFO" is displayed on the right.
- Sequentially press the keypad: [3][1] MENU [1][0] MENU (Delete existing data for channel 10, if any).
- Press MENU [1][3] MENU [1][2][3] MENU (Select transmit analog sub-tone, e.g., CTCSS: 123.0).
- Press MENU to select the A band pointer.
- Input receive frequency (e.g., 43266250).
- Press MENU [3][0] MENU [1][0] MENU (Enter channel storage, e.g., channel 10). Channel is added.
- Press EXIT to return.
- Press [VFO/MR] to switch to Channel Mode, the channel number will reappear on the right.
7.16. Repeater Programming
The following instructions assume you know the transmit and receive frequencies used by the repeater and have the right to use them.
- Press EXIT to exit the menu, press [VFO/MR] to switch to Frequency Mode, "VFO" is displayed on the right.
- Use the numeric keypad to input the repeater's transmit (receive) frequency.
- Press MENU to enter the menu.
- Input [2][9] on the numeric keypad to enter frequency difference. Use the numeric keypad to input the specified frequency difference.
- Press MENU to confirm and save.
- Input [2][8] on the numeric keypad to go to frequency difference direction. Use ▲ or ▼ to select positive (+) or negative (-) frequency difference.
- Press MENU to confirm and save.
- Press EXIT to exit the menu. If all goes well, you should be able to make a test call through the repeater.
8. Menu Operations
8.1. Basic Menu Usage
Use the arrow keys to navigate the menu:
- Press MENU to enter the main menu.
- Use ▲ or ▼ to navigate between menu items.
- Once you find the desired menu item, press MENU again to select that menu item.
- Use ▲ or ▼ to select the desired parameter.
- After selecting the parameter to set for the given menu item:
- To confirm the selection, press MENU. This will save your settings and return to the main menu.
- To cancel changes, press EXIT. This will reset the menu item and completely exit the menu.
- To exit the menu, press EXIT.
8.2. Quick Menu Access
You may have noticed that each menu item in the menu list has a numerical value associated with it. These numbers can be used to directly access any given menu item.
- Press MENU to enter the menu.
- Use the numeric keypad to input the number of the menu item.
- To enter the menu item, press MENU.
- Use ▲ or ▼ to select the desired parameter.
- After selecting the parameter to set for the given menu item:
- To confirm the selection, press MENU. This will save your settings and return to the main menu.
- To cancel changes, press EXIT. This will reset the menu item and completely exit the menu.
- To exit the menu, press EXIT.
8.3. Menu List
The following table provides an overview of the menu options. For detailed descriptions and settings, please refer to the official PDF manual.
| Menu No. | Primary Menu (English) | Secondary Menu (English) | Description |
|---|---|---|---|
| 0 | SQL | 0-9 | Squelch Level (0=open, 9=tightest) |
| 1 | STEP | 2.5K, 5K, 6.25K, 10K, 12.5K, 20K, 25K, 50K, 100K | Frequency Step |
| 2 | TXP | HIGH, LOW | Transmit Power (High/Low) |
| 3 | SAVE | OFF, 1:1, 1:2, 1:4 | Battery Save Mode |
| 4 | VOX | OFF, 1-9 | Voice Operated Transmit Level |
| 5 | W/N | WIDE, NARROW | Bandwidth (Wide/Narrow) |
| 6 | ABR | OFF, 5S, 10S, 15S, 20S, 30S, 1M, 2M, 3M | Automatic Backlight Duration |
| 7 | TDR | OFF, ON | Dual Watch Function |
| 8 | BEEP | OFF, ON | Keypad Beep Tone |
| 9 | TOT | 15-75 (seconds) | Transmit Overtime Timer |
| 10 | R-CTCSS | OFF, 67.0-254.1Hz | Receive Analog Sub-tone |
| 11 | R-DCS | OFF, D023N-D754I | Receive Digital Sub-tone |
| 12 | T-CTCSS | OFF, 67.0-254.1Hz | Transmit Analog Sub-tone |
| 13 | T-DCS | OFF, D023N-D754I | Transmit Digital Sub-tone |
| 14 | Scan CTCSS | OFF, 67.0-254.1Hz | Scan Analog Sub-tone |
| 15 | Scan DCS | OFF, D023N-D754I | Scan Digital Sub-tone |
| 16 | CDCSS SAVE MODE | ALL, RX, TX | Sub-tone Storage Mode |
| 17 | VOICE | OFF, ON | Voice Prompt Switch |
| 18 | LANGUAGE | ENGLISH, CHINESE | Menu Language |
| 19 | DTMFST | OFF, DT-ST, ANI-ST | Side Tone Switch |
| 20 | S-CODE | 1-15 | DTMF Signaling Code |
| 21 | SC-REV | TO, CO, SE | Scan Resume Method |
| 22 | DTMF CODE | OFF, BOT, EOT, BOTH | DTMF Transmit Mode |
| 23 | PTT-LT | 0MS-1000MS | Transmit Delay |
| 24 | MDF-A | FREQ, NAME, CH | A-Band Display Mode |
| 25 | MDF-B | FREQ, NAME, CH | B-Band Display Mode |
| 26 | BCL | OFF, ON | Busy Channel Lockout |
| 27 | AUTOLOCK | OFF, ON | Automatic Keypad Lock |
| 28 | SFT-D | NONE, +, - | Frequency Shift Direction |
| 29 | OFFSET | 00.000-99.999 | Frequency Shift Amount |
| 30 | MEMCH | 001-999 | Memory Channel |
| 31 | DELCH | 001-999 | Delete Channel |
| 32 | AL-MOD | ON SITE, SEND SOUND, SEND CODE | Alarm Mode |
| 33 | STE | OFF, ON | Tail Tone Elimination |
| 34 | RP_STE | OFF, 1S-10S | Repeater Tail Tone Elimination |
| 35 | RPT-RL | OFF, 1S-10S | Repeater Delay |
| 36 | ROGER | OFF, ON | End of Call Tone |
| 37 | TONE | 1000Hz, 1450Hz, 1750Hz, 2100Hz | Repeater Tone |
| 38 | MENU EXIT TIME | 5S, 10S, 15S, 60S | Menu Exit Time |
| 39 | VOX DELAY | 0.5S-2.0S | VOX Delay |
| 40 | POWER ON MSG | LOGO, ICON | Power On Display |
| 41 | VOICEPRI | OFF, ON | Voice Scramble (Frequency Hopping) |
| 42 | RESET | VFO, ALL | Factory Reset |
| 43 | POWER ON PWD | OFF, ON | Power On Password |
| 44 | STOP WATCH | OFF, ON | Stopwatch |
| 45 | SCRAMBLE | OFF, MODE1, MODE2, MODE3 | Voice Scramble |
| 46 | VERSION | Firmware, Hardware | Version Information |
9. Specifications
The following table outlines the technical specifications of the Baofeng UV-5RH. Please note that all specifications are subject to change without prior notice or liability.
| Category | Specification |
|---|---|
| General Specifications | |
| Channel Quantity | 999 groups |
| Channel Spacing | ≤16KHz |
| Operating Voltage | DC 7.4V (Rechargeable Li-ion Battery) |
| Frequency Stability | ±2.5ppm |
| Antenna Impedance | 50Ω |
| Dimensions | 130mm x 58mm x 40mm |
| Material | Plastic |
| Waterproof / Water-Resistant | No |
| Transmitter Section | |
| Transmit Current | ≤1.6A |
| Modulation Mode (Wide/Narrow) | 16KΦF3E / 11KΦF3E |
| Max Frequency Deviation (Wide/Narrow) | ≤5KHz / ≤2.5KHz |
| Signal-to-Noise Ratio (Wide/Narrow) | ≥45dB / ≥40dB |
| Receiver Section | |
| Receive Sensitivity | ≤0.25uV (12dB SINAD) |
| Max Audio Power | 1W@10% |
| Signal-to-Noise Ratio | ≥45dB |
| Receive Current | ≤380mA |
| Max Audio Power | 1W@10% |
10. Troubleshooting
If the methods below do not resolve your issue, or if you encounter other malfunctions, please contact your local dealer for further technical support.
| Problem | Solution |
|---|---|
| No power, cannot turn on |
|
| Battery power does not last long after charging | The battery has reached the end of its life (approximately 300 charge/discharge cycles). Please replace the battery. |
| Cannot talk to other members in the group |
|
| Short communication range | Confirm that the antenna is properly connected. Confirm that it is the original antenna. Check if the battery voltage is normal. Contact the dealer to adjust the squelch level. |
| Other (non-group member) voices appear on the channel | Please change the sub-tone signal. All walkie-talkies in the group must change their sub-tone signals. |
| Loud noise |
|
11. Maintenance and Cleaning
To ensure the good performance of this product and extend its lifespan, please familiarize yourself with the following content for better daily maintenance and cleaning.
11.1. Maintenance
- Do not use hard objects to puncture or scratch this product.
- Do not store this product in an environment containing corrosive electronic circuit substances.
- When carrying or using this product, do not hold the antenna or headset cable.
- When not using accessories, cover the accessory port.
11.2. Cleaning
Caution: Before cleaning, turn off the power and remove the battery.
- Regularly use a clean, dry, lint-free cloth or brush to wipe off dust from the surface of the product and the charging contacts.
- The keys, control knobs, and casing of this product are prone to getting dirty. Use a neutral detergent and a non-woven cloth to clean them. Do not use decontamination agents, alcohol, sprays, or petroleum-based chemicals to avoid damaging the product surface and casing.
- After cleaning, ensure the product is completely dry before use.
12. Compliance Information
Restriction of Hazardous Substances Table
This table indicates the presence of restricted substances or elements in the product, in accordance with the 'Measures for the Administration of the Restriction of the Use of Hazardous Substances in Electrical and Electronic Products'.
| Part Name | Lead (Pb) | Mercury (Hg) | Cadmium (Cd) | Hexavalent Chromium (CrVI) | Polybrominated Biphenyls (PBB) | Polybrominated Diphenyl Ethers (PBDE) |
|---|---|---|---|---|---|---|
| Metal Parts | X | O | O | O | O | O |
| Plastic Parts | O | O | O | O | O | O |
| Glass Parts | X | O | O | O | O | O |
| Circuit Board | X | O | O | O | O | O |
| Power Supply (if any) | X | O | O | O | O | O |
| Accessories | X | O | O | O | O | O |
This table is compiled in accordance with SJ/T 11364-2014 regulations.
O: Indicates that the content of this hazardous substance in all homogeneous materials of this component is below the limit requirements specified in GB/T 26572-2011.
X: Indicates that the content of this hazardous substance in at least one homogeneous material of this component exceeds the limit requirements specified in GB/T 26572-2011, and there is currently no mature alternative solution in the industry that meets the EU RoHS directive for environmental protection.
Note: This product should not be discarded at will after its service life or after it cannot function normally due to repairs. Please hand it over to enterprises qualified to handle waste electrical and electronic products. For correct disposal methods, please consult national or local regulations regarding the disposal of waste electrical and electronic products.
13. User Tips
- Privacy: Utilize the voice scramble function for enhanced privacy during communications.
- Battery Life: The battery typically lasts 2-3 days in standby mode. For extended storage, it is recommended to disconnect the battery to prevent drainage, as the radio draws a small current even when powered off.
- Reception: Users report good reception quality.
- Antenna Performance: The standard antenna may be too short for longer distances. Consider purchasing a longer, high-gain antenna for improved range.
- Learning Curve: If you are new to walkie-talkies, watching online video tutorials (e.g., on YouTube) can significantly help in understanding the device's functions and operation.
- Range in City: While the product is capable of long-range communication, dense urban environments with obstacles like buildings will significantly reduce the effective range.
14. Official User Manual (PDF)
For the complete and most detailed user manual, including comprehensive diagrams and advanced programming instructions, please refer to the official PDF document: