Important Notice & Safety Information
This manual is intended primarily for use by professional bicycle mechanics. Users who are not professionally trained for bicycle assembly should not attempt to install the components themselves. If any part of the information is unclear, do not proceed with installation. Contact your place of purchase or a local bicycle dealer for assistance.
Always read all instruction manuals included with the product. Do not disassemble or modify the product other than as stated in this manual.
All manuals and technical documents are accessible online at https://si.shimano.com.
DANGER
Failure to follow instructions will result in death or serious injury.
WARNING
- Be sure to follow the instructions provided in the manuals when installing the product. Use genuine Shimano parts only. Loose, worn, or damaged parts, or incorrect adjustments, can lead to serious injury.
- Wear safety glasses or goggles to protect your eyes while performing maintenance tasks.
CAUTION
Failure to follow instructions could cause personal injury or physical damage to equipment and surroundings.
NOTICE
- Products are not guaranteed against natural wear and deterioration from normal use and aging.
- For maximum performance, Shimano lubricants and maintenance products are highly recommended.
- If gear shifting is not smooth, clean and lubricate all moving parts.
- If looseness in links is too great for adjustment, replace the derailleur.
- Grease the inner cable and outer casing interior for proper sliding.
- Use specified outer casing and bottom bracket cable guide for smooth operation.
- Periodically clean and lubricate the derailleur and all moving parts (mechanism and pulleys).
- If gear shifting adjustment cannot be performed, check the parallelism at the rear end of the bicycle, cable lubrication, and outer casing length.
- If abnormal noise occurs due to pulley looseness, replace the pulley.
- High cable resistance from internal cable routing can impair SIS shifting. Check inner cable and outer casing for issues if lever operation feels resistant or SIS shifting is abnormal.
Product Overview
This manual provides instructions for the Shimano 105 R7000 and Ultegra R8000 series rear derailleurs, designed for 11-speed road bike systems. These derailleurs feature SHIMANO SHADOW RD technology for stable shifting performance and are direct mount compatible. They are available in SS (Short Cage) and GS (Medium Cage) variants to accommodate different cassette ranges.
Setup
1. Installation of the Rear Derailleur (Road)
- Install the rear derailleur onto the bicycle frame.
- For standard type installation, use a 5 mm hexagon wrench. Tighten to 8-10 N·m. Ensure the hexagon wrench is inserted all the way into the bracket axle tool hole. Avoid using a ball point hexagon wrench.
- For bracket type installation, tighten to 3-4 N·m.
- Periodically check that there is no gap between the derailleur hanger and the bracket. A gap can lead to gear shifting performance issues.
2. Chain Length (Road)
The correct chain length is crucial for optimal shifting performance and to prevent excessive load on the drivetrain.
- When largest sprocket is 27T or smaller: Place the chain on the largest chainring and smallest sprocket. The line drawn through the guide pulley and tension pulley should be 90° or greater to the ground.
- When largest sprocket is 28T or larger: With the chain on both the largest sprocket and the largest chainring, add 2 links to determine the minimum number of links.
- For RD-A070, if using a front triple with a largest sprocket of 30T or smaller, follow the 27T or smaller method. If using a front triple with a largest sprocket of 32T or larger, follow the 28T or larger method.
Refer to the original dealer's manual for detailed diagrams on chain length measurement and routing.
3. Securing the Cable (Road)
- Cutting the Outer Casing: Cut the end of the outer casing opposite to the end with the marking. After cutting, make the end round so the inside of the hole has a uniform diameter. Attach the same outer cap to the cut end.
- Outer Casing Length for SHADOW RD: If there is a B-tension adjust bolt, loosen it to the position shown in the illustration (refer to manual diagram). Check for enough slack in the outer casing. Align the outer casing with the bottom edge of the holder on the rear derailleur and cut off any excess. The distance between the outer stopper and the outer casing holder may change with rear suspension movement; determine length at the point of greatest extension.
- Connecting and Securing the Cable: Connect the inner cable to the rear derailleur. Remove initial slack by pulling the cable as shown in the illustration (refer to manual diagram).
- Reconnecting the Inner Cable: Reconnect the inner cable to the rear derailleur. Tighten to 6-7 N·m using a 4 mm or 5 mm hexagon wrench. Ensure the cable is securely in the groove.
- Final Cable Adjustment: Set the inner cable so that the margin is approximately 30 mm or less. Install the shift inner cap. Check that the inner cable does not interfere with the wheel spokes. Stop the wheel from turning during this step.
4. Stroke Adjustment (Road)
- Top Adjustment: Turn the top adjustment bolt to align the guide pulley below the outer line of the smallest sprocket when viewed from the rear.
- Low Adjustment: Turn the low adjustment bolt so the guide pulley is directly in line with the largest sprocket.
Detailed diagrams for stroke adjustment are available in the full dealer's manual.
5. SIS Adjustment (Road)
The Shimano Index System (SIS) adjustment ensures precise gear changes.
- Confirming Positioning on Gear: Operate the shifting lever several times to move the chain to the 2nd sprocket from the smallest. While operating the lever just enough to close the gap, turn the crank arm. The best setting is when the chain touches the 3rd sprocket and makes noise when the lever gap is just closed.
- When the chain shifts to the 3rd sprocket from the smallest: Tighten the cable adjustment barrel (clockwise) until the chain returns to the 2nd sprocket.
- When no sound is generated: Loosen the cable adjustment barrel (counterclockwise) until the chain touches the 3rd sprocket and makes noise. Return the lever to its original position (2nd sprocket setting) and turn the crank arm clockwise. If the chain is still touching the 3rd sprocket and making noise, tighten the cable adjustment barrel slightly (clockwise) until the noise stops and the chain runs smoothly.
- Operate the lever to change gears and confirm no noise occurs in any gear position.
For best SIS performance, periodically lubricate all power-transmission parts.
Operating Instructions
Your Shimano rear derailleur is designed for smooth and reliable 11-speed shifting. To operate, use your bicycle's shifting levers to move the chain between the sprockets on your cassette. Ensure that the chain is properly aligned and that the derailleur is correctly adjusted for optimal performance.
Always shift gears smoothly and avoid forcing the chain. Listen for any abnormal noises during shifting, which may indicate a need for adjustment or maintenance.
Maintenance
- Periodically clean the gears with a neutral detergent. Cleaning the chain with neutral detergent and lubricating it can extend the life of the gears and chain.
- Always use a sprocket set bearing the same group marks. Do not combine sprockets with different group marks.
- Use an outer casing that allows sufficient length for handlebar turns without touching the frame.
- Use special grease for the gear shifting cable. Do not use premium grease or other types, as they may degrade shifting performance.
Replacing the Pulley (Road)
- Replace the pulley using a 3 mm hexagon wrench.
- Tighten to 2.5-5 N·m.
- Check the arrow direction on the pulley when installing it to ensure correct orientation.
Refer to the original dealer's manual for detailed diagrams on pulley replacement.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Gear shifting is not smooth | Dirty/unlubricated derailleur/chain, worn parts, incorrect cable tension. | Clean and lubricate all moving parts. Check for worn parts and replace if necessary. Adjust SIS (cable tension). |
| Chain comes off | Incorrect derailleur adjustment, improper chain length. | Re-adjust stroke limits and SIS. Verify correct chain length. |
| Abnormal noise from pulleys | Loose or worn pulleys. | Replace pulleys. |
| Lever operation feels resistant / SIS not normal | High cable resistance, bent outer casing, issues with inner cable. | Check inner cable and outer casing for damage or bending. Ensure proper lubrication. |
| Deformation of tool hole during installation | Incorrect tightening procedure (e.g., using ball point hex wrench). | Always insert hexagon wrench fully. Avoid ball point hexagon wrenches. |
Specifications
| Feature | Detail |
|---|---|
| Model No. | RD-R7000-GS (Medium Cage) |
| Series | SHIMANO 105 R7000 Series (also compatible with Ultegra R8000) |
| Cage Type | GS (Medium Cage) / SS (Short Cage) |
| Compatible Chain | HG-EV 11-speed / HG-X11 |
| Low Sprocket (Max) | 34T |
| Low Sprocket (Min) | 28T |
| Max. Front Difference | 16T |
| Pulley Teeth | 11T |
| Rear Speeds | 11 |
| Top Sprocket (Max) | 12T |
| Top Sprocket (Min) | 11T |
| Total Capacity | 39T |
| Weight | 230g (±10%) |
| Colour | Black |
User Tips
- Compatibility Check: The R7000 series is often a direct and effective replacement for older 105 series derailleurs (e.g., 5800), offering similar or improved performance.
- Installation Precision: Proper installation and adjustment are key to achieving immediate and precise shifting. Take your time with cable routing and tension.
- Lubrication: Although pulleys may come pre-lubricated, regular checks and lubrication of all moving parts, especially the pulleys, will ensure smooth operation and extend the derailleur's lifespan.
- Road Bike Fit: This derailleur is specifically designed for road bikes and provides excellent performance in that application.
- Cassette Range: The GS (medium cage) model supports a wide range of cassettes, typically up to 34T for the largest sprocket.
Warranty & Support
For technical support, service, or to obtain a hardcopy of the User's Manual, please contact Shimano directly:
- SHIMANO NORTH AMERICA BICYCLE, INC.
One Holland, Irvine, California 92618, U.S.A.
Phone: +1-949-951-5003 - SHIMANO EUROPE B.V.
High Tech Campus 92, 5656 AG Eindhoven, The Netherlands
Phone: +31-402-612222
General Contact: contactshimano@shimano-eu.com - SHIMANO INC.
3-77 Oimatsu-cho, Sakai-ku, Sakai City, Osaka 590-8577, Japan
Specifications are subject to change for improvement without notice. The latest information is available online at https://si.shimano.com.
A PDF version of the dealer's manual is available online: View User Manual (PDF)