1. Introduction
Thank you for choosing the AIFEN A11 USB Soldering Station. This portable and versatile soldering iron is designed for precision work, compatible with C210 soldering tips, and powered conveniently via USB. This manual provides essential information for the safe and effective use of your device.

Figure 1: AIFEN A11 Soldering Iron, highlighting its lightweight design (6.8g) and use of 210 soldering tips.
2. Package Contents
Please check the package for the following items:
- AIFEN A11 Soldering Iron
- Soldering Tip (e.g., 210-K, depending on variant)
- User Manual (this document, and a physical copy if included)

Figure 2: Typical package contents including the AIFEN A11 soldering iron and a 210-K soldering tip.
3. Setup
- Insert Soldering Tip: Carefully insert the desired 210 series soldering tip into the heating element end of the AIFEN A11. Ensure it is seated firmly.
- Connect Power: The AIFEN A11 is powered via a USB Type-C port. Connect a compatible USB power source (e.g., a power bank, USB wall adapter, or computer USB port) to the soldering iron. Ensure your power source supports the required voltage and wattage for optimal performance (refer to Specifications).

Figure 3: The AIFEN A11 can be conveniently powered by a USB power bank for portable use.
The device supports various fast charging protocols including QC3.0, PD, AFC, and FCP, allowing for flexible power options from 5V/10W up to 20V/75W.

Figure 4: Power compatibility details, showing supported protocols and voltage/wattage ranges.
4. Operating Instructions
The AIFEN A11 features a multifunction display frame and adjustment buttons for precise control.

Figure 5: Multifunction display frame showing temperature, voltage, and battery percentage, with adjustment buttons.
4.1. Power On/Off
The device powers on automatically when connected to a compatible power source. To power off, disconnect the USB-C cable.
4.2. Temperature Adjustment
Use the adjustment buttons located near the display:
- Heating: Press the right adjustment button once to increase the temperature by 1°C. Press and hold for at least one second for rapid temperature increase.
- Cooling: Press the left adjustment button once to decrease the temperature by 1°C. Press and hold for at least one second for rapid temperature decrease.
The display will show the set temperature.
4.3. Switching Temperature Units (°C/°F)
Short press the adjustment button downwards (towards the tip) for 1 second to switch between Celsius (°C) and Fahrenheit (°F).
4.4. Voltage Option Function
Press the adjustment button for 3 seconds to enter the voltage option function. Adjust parameters left and right (5V/9V/12V/15V/20V). Long press to save and exit.
4.5. Temperature Calibration (CAL Mode)
To enter calibration mode:
- Long press the adjustment button downwards for 3 seconds to enter CAL mode (±99 degree calibration).
- Adjust the setting parameters using the left and right adjustment buttons.
- Long press the adjustment button downwards to save and exit.
Alternatively, in CAL interface, short press the adjustment button downwards to enter TEMP mode for another calibration method, using 350°C as standard. Adjust parameters and long press to save and exit.
4.6. Gyroscope Function (Auto-Sleep/Wake)
The AIFEN A11 features a gyroscope for intelligent power management:
- Dormancy: When the soldering iron is still for a period, it enters a dormancy state to conserve energy and prevent tip oxidation.
- Wake: Simply pick up the soldering iron, and it will immediately switch status and resume operation.

Figure 6: Gyroscope function allows the soldering iron to enter dormancy when still and wake up when picked up.
4.7. Using with Optional Soldering Station Bracket
An optional soldering station bracket (purchased separately) can enhance the functionality of your AIFEN A11, providing stable support and higher power output (up to 20V/75W).

Figure 7: The AIFEN A11 connected to an optional soldering station bracket, enabling higher power output and faster heat-up/recovery times.
The bracket typically includes a hub, plug box, power switch, cleaning copper wire, power interface, and USB handle interface. Refer to the bracket's manual for specific setup and operation.
5. Maintenance
5.1. Soldering Tip Care
- Always tin the soldering tip before and after use to prevent oxidation.
- Clean the tip regularly using a damp sponge or brass wool (often found in soldering station brackets) to remove excess solder and flux residue.
- Replace tips when they become pitted or no longer hold solder effectively.
5.2. General Cleaning
- Ensure the device is disconnected from power and cooled down before cleaning.
- Wipe the body of the soldering iron with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Keep the USB-C port free from dust and debris.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Soldering iron does not heat up. |
|
|
| Display is blank or not working. |
|
|
| Temperature is unstable or inaccurate. |
|
|
7. Specifications
| Model | A11 |
| Temperature Range | 100-450°C (212-842°F) |
| Voltage Range | 5V/10W, 9V/27W, 12V/45W, 15V/60W, 18V/75W (18V/75W only with special bracket) |
| Interface Type | USB Type-C |
| Protocol Support | QC3.0 / PD / AFC / FCP |
| Supported Soldering Tip Model | 210 Series |
| Weight | 6.8g (approximate, main unit) |
| Heat-up Time | Approx. 3 seconds (with adequate power supply) |
| Temperature Recovery | Approx. 1 second (with adequate power supply) |
| Certification | CE |
8. User Tips
- Power Source: For optimal performance and quick heating, use a high-quality USB power adapter or power bank that supports fast charging protocols (QC3.0, PD) and can deliver at least 9V/27W, preferably higher. A good USB-C cable is also essential.
- No Internal Battery: The AIFEN A11 does not have an internal battery; it requires continuous connection to a USB power source during operation.
- Precision Work: This soldering iron is particularly well-suited for small, precise soldering tasks, such as cell phone repair and intricate electronics.
- Quick Heat-up: Take advantage of its rapid heat-up and recovery times for efficient work.
9. Warranty and Support
For detailed warranty information, please refer to the terms provided by your retailer or the official product documentation. If you encounter any issues not covered in this manual, please contact the seller or manufacturer's support channel.
An additional user manual in PDF format may be available for download at: AIFEN A11 User Manual (PDF).