GTMEDIA V8 Finder 2

Contents

GTMEDIA V8 Finder 2 Digital Satellite Finder

User Instruction Manual

Introduction

Thank you for choosing the GTMEDIA V8 Finder 2 Digital Satellite Finder. This device is designed to assist you in accurately aligning your satellite dish for optimal signal reception. It features a 3.5-inch HD LCD screen, supports DVB-S/S2/S2X signals, and includes a 4000mAh large-capacity battery for extended use. Please read this manual thoroughly before operation to ensure safe and proper use of your device.

Important Safety Instructions

To ensure safe and proper operation, please observe the following:

  • Read this user manual completely before starting any operation.
  • Install the satellite dish with the correct direction and angle. If issues arise, contact your local dealer.
  • If the unit is moved from a cold to a hot environment, condensation may occur. Turn off the power and wait 1-2 hours before turning it on again.
  • Ensure the meter is placed in a clean area with adequate ventilation.
  • Do not cover the meter or place it near heat-emitting devices.
  • Clean the device casing with a soft cloth lightly dampened with cleaning liquid.
  • Do not attempt to remove the cover or disassemble the unit.
  • Avoid exposing the unit to extreme heat, cold, or humid conditions.
  • Prevent liquids or any foreign materials from entering the unit.

Product Overview & Illustration

The GTMEDIA V8 Finder 2 is a compact and powerful tool for satellite signal detection. Key features include:

  • Display: 3.5-inch High Definition TFT LCD screen.
  • Signal Support: DVB-S/S2/S2X, BISS/PowerVu, VCM/ACM/Multi-stream/T2MI, PLP, MPEG2, MPEG4, H.264 (8 Bit).
  • Battery: 7.4V 4000mAh Large Capacity.
  • Charging: Fsat Charging, supports 5V/9V/12V voltage, fast charge up to 18W.
  • Connectivity: USB 2.0.
GTMEDIA V8 Finder 2 device with key features highlighted
Figure 1: GTMEDIA V8 Finder 2 with main features: 3.5 inch HD LCD, 4000mA Large Capacity, DVB-S/S2/S2X, USB 2.0, HD 1080P.
GTMEDIA V8 Finder 2 showing various functions and features
Figure 2: Device overview highlighting S2X/S2/S support, Spectrum analysis, Search function, Media playback, 3.5 inch HD LCD, 7.4V 4000mAh battery, Fsat Charging, and USB port.

Device Ports and Controls

Diagram of GTMEDIA V8 Finder 2 ports and connections
Figure 3: Port layout including LNB IN (for satellite signals), ON/OFF switch, USB 2.0 port, HD OUT, PD (Power Delivery) port, AV OUT, and AV IN.

Front Panel Controls:

  • LCD Screen: Video display.
  • Power LED: Power indicator light.
  • 22KHz LED: 22kHz indicator light.
  • 13V/18V LED: Vertical/Horizontal polarization voltage output light.
  • Lock LED: Signal Lock indicator light.
  • Charger LED: Flashing red (charging), Red and blue (fully charged).
  • REC (Red) Key: Record function.
  • SUBT (Green) Key: Subtitle interface.
  • TEXT (Yellow) Key: Teletext interface.
  • AUDIO (Blue) Key: Audio interface.
  • MENU Key: Show main menu or go back to previous menu.
  • EXIT Key: Escape from current menu and save settings.
  • Navigation Keys (Up/Down/Left/Right/OK): Volume control, cursor movement, channel change, confirmation.
  • Numeric Keys (0-9): Select channels or enter programming.
  • SPEC Key: Spectrum interface.
  • LOOP Key: LOOP Search interface.
  • B.LIGHT Key: LCD on/off display.
  • TV/R Key: TV and radio switch.
  • INFO Key: Info interface.
  • SAT Key: Display satellite list.
  • MUTE Key: Enable or disable audio output.

Side and Rear Ports:

  • LNB IN: Connect to satellite antenna cable.
  • USB: Connect to USB memory.
  • Power Input: Connect to adaptor input (5V/9V/12V).
  • Power Switch: Turn on/off meter.
  • HDMI: Use HD cable to connect to TV.
  • AV OUT: Connect to AV port for TV.
  • AV IN: Connect to AV port for meter.
  • Speaker: Integrated speaker.

Setup and Connections

Initial Charging

Before first use, ensure the device is fully charged. Connect the provided power adapter to the device's power input port and plug it into a power outlet. The Charger LED will flash red during charging and turn red and blue when fully charged. The device supports 5V/9V/12V fast charging up to 18W.

Note: When the adapter is plugged in for charging, the device may restart once. This is normal operation and not a product fault.

Connecting to Satellite Dish and TV

Connection diagram for GTMEDIA V8 Finder 2 to TV and satellite dish
Figure 4: Connection diagram showing LNB IN to satellite dish, and HDMI/AV OUT to a television.
  1. Satellite Connection: Connect the cable from your LNB (Low Noise Block) on the satellite dish to the LNB IN port on the V8 Finder 2.
  2. TV Connection (Optional): For viewing channels on a larger screen, connect an HDMI cable from the HD OUT port of the V8 Finder 2 to your television's HDMI input. Alternatively, use AV cables from the AV OUT port to your TV's AV input.
  3. External Device Input (Optional): If you need to input video from another device (e.g., a TV box), connect it to the AV IN port.

Operating Instructions

After connecting the cables and powering on the device, press the MENU button to display the Main Menu.

Main Menu Overview

The main menu provides access to various functions:

  • Installation: For satellite and transponder settings.
  • Spectrum: Displays signal spectrum analysis.
  • Loop Search: For loop search functions.
  • Calculate: Helps calculate dish alignment parameters.
  • Channel: Manage TV and Radio channels.
  • Media: Play multimedia files.
  • Tools: Access system tools and utilities.
  • System: Configure system settings.

Installation Menu

Select Installation and press OK to enter the Satellite list. Use the Navigation keys to select a satellite and press OK to enter its settings.

  • Satellite: Select the desired satellite.
  • LNB Freq: Set the correct LNB frequency (e.g., Universal 9750-10600).
  • DiSEqC1.0 / DiSEqC1.1: Set the port number for DiSEqC switches.
  • 22K: Turn the 22 kHz switch on or off.
  • LNB Power: Set LNB power output (H, V, Auto, or Off). Default is Auto.
  • Motor Setup: If using DiSEqC1.2 or USALS, configure motor settings.

Transponder Settings: Press the '0' key to enter the Transponder setting menu. Here you can add, edit, or delete transponders. Use the INFO key to view current transponder signal information.

Satellite Search: After configuring satellite and transponder settings, you can perform a search. Options include Single Satellite Search, FTA Only, Scan Channel (TV + Radio), Network Search, and Blind Scan.

Calculate Menu

This feature helps in dish alignment. Select Calculate from the main menu.

  • Satellite: Select the target satellite.
  • Longitude: Displays the longitude of the current satellite.
  • Local Longitude / Local Latitude: Use numeric keys to input your local geographical coordinates.
  • Calculate: Based on the entered latitude and longitude, the device will provide reference data needed for satellite dish installation.

Channel Menu

Select Channel to manage your TV and Radio channels.

  • TV Channel List / Radio Channel List: View and manage channels.
  • EPG: Access Electronic Program Guide.
  • Timer Setting: Set timers for recording or viewing.
  • Favorite: Manage your favorite channels.
  • Delete All: Delete all channels.

Media Menu

Select Media to access multimedia functions.

  • Music: Play audio files.
  • Picture: View image files.
  • Movie: Play video files.
  • Record Manager: Manage recorded programs.
  • HDD Information: View information about connected storage.
  • DVR Configuration: Configure Digital Video Recorder settings.

Tools Menu

Select Tools for system utilities.

  • Information: View product information.
  • Factory Setting: Reset all user settings and database to factory defaults. Warning: This will erase all your custom settings.
  • USB Upgrade: Update firmware from a USB drive. Warning: Do not power off or remove USB during upgrade to prevent damage.
  • USB Backup: Backup software or database to a USB drive.
  • Record: Record TS stream to a USB drive.

System Menu

Select System to configure device settings.

  • Language: Change the system's default language.
  • AV Setting: Configure Audio/Video output settings.
  • Local Time Setting: Set the system time zone.
  • OSD Setting: Configure On-Screen Display options, including beeper on/off.
  • WiFi Manager: Set up WiFi connection settings.

Maintenance

To ensure the longevity and optimal performance of your GTMEDIA V8 Finder 2, follow these maintenance guidelines:

  • Cleaning: Use a soft, dry cloth to clean the exterior of the device. For stubborn marks, slightly dampen the cloth with water or a mild, non-abrasive cleaning solution. Do not use strong chemicals or solvents.
  • Storage: When not in use, store the device in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity.
  • Battery Care: For optimal battery life, avoid fully discharging the battery frequently. If storing for extended periods, charge the battery to about 50% every few months.
  • Avoid Impact: Protect the device from drops and impacts, which can damage internal components or the screen.

Troubleshooting

If you encounter issues with your V8 Finder 2, try the following solutions:

  • Device does not power on: Ensure the battery is charged. Connect the power adapter and try again. Check the power switch is in the ON position.
  • No signal detected: Verify that the LNB IN cable is securely connected to both the device and the LNB on the dish. Check LNB power settings in the Installation menu. Ensure the dish is correctly aimed at the satellite.
  • Screen is blank or frozen: Try restarting the device by turning it off and on again. If the issue persists, perform a factory reset (note: this will erase all custom settings).
  • Unable to update firmware: Ensure the USB drive is formatted correctly (FAT32) and the firmware file is placed in the root directory. Do not remove the USB drive or power off the device during the update process.
  • Incorrect language displayed: Go to the System menu and select 'Language' to choose your preferred language.

Specifications

FeatureSpecification
TypeDIGITAL
Brand NameGTMEDIA
Model NumberV8 Finder 2
Display3.5 inch HD LCD
High DefinitionYes (HD 1080P)
FTA (Free To Air)Yes
Signal SupportDVB-S/S2/S2X
DecodingBISS/PowerVu, VCM/ACM/Multi-stream/T2MI, PLP, MPEG2, MPEG4, H.264 (8 Bit)
Battery Capacity7.4V 4000mAh
Charging5V/9V/12V, 18W Fast Charge
USB PortUSB 2.0
PackageYes
CertificationCE
Dimensions (approx.)155mm (H) x 95mm (W) x 45mm (D)

User Tips

Based on user experiences, here are some tips to enhance your use of the GTMEDIA V8 Finder 2:

  • Firmware Updates: Regularly check the official GTMEDIA website (www.freesat.cn) for firmware updates. Updating via USB can provide new features, improved performance, and bug fixes. Remember to back up your channel list and settings before updating.
  • Channel Management: Utilize the USB backup feature to save your customized channel lists and transponder settings. This is useful after a factory reset or firmware update.
  • Direct Channel Viewing: Take advantage of the ability to view channels directly on the device's screen. This significantly speeds up the alignment process, as you can visually confirm signal quality.
  • Adding Satellites: If a satellite you need is not pre-loaded, you can manually add it and its transponders through the Installation menu.
  • Language Settings: The device supports multiple languages. If the display language is not to your preference, navigate to the System menu to change it.

Warranty and Support

For product feature introductions, user guides, software updates, or technical support, please visit the official forum or YouTube channel:

Manufacturer Information:
Shenzhen Jiti Multimedia Technology Co., Ltd
Address: 601A, comprehensive building, Nankeng second industrial zone, Nankeng community, Bantian street, Longgang District Shenzhen, 518000, Guangdong, CN

European Representative:
Name: GTMAX TECHNOLOGY, S.L.
Address: C. DEL PUERTO DE POZAZAL, 4, NAVE 32, 28031 MADRID, ESPAÑA
Contact: Samuel
Tel: +34 910641455
Mail: sp-sales01@gtmedia.cc


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.