1. Important Safety Warnings
Please read all warnings carefully before operation to ensure safe use and prevent damage or injury.
- The packaging and instructions contain important information and should be kept for future reference.
- You are responsible for ensuring that no harm will be caused to the personal and property of others during operation.
- Commissioning and installation must strictly follow instructions. Maintain a distance of 2 to 3 meters between the aircraft and users/bystanders to prevent injury.
- The company and distributors are not responsible for any loss, damage, or injury caused by improper use or operation.
- Children under 14 years old must be guided by adults when operating the aircraft.
- Install and use correctly; some parts require adult assembly.
- This product contains small parts; keep out of reach of children to prevent accidental eating or suffocation.
- Do not operate on roads or in areas with standing water to avoid accidents.
- Dispose of packing materials promptly to avoid harm to children.
- Do not disassemble or modify the aircraft, as this may cause malfunction.
- The charging cable must be inserted into a designated power supply (5V=2A) matching the product label.
- Only use the charging cable configured by the factory. The charging cable is not a toy.
- Rechargeable batteries must be charged under adult supervision, away from flammable materials. The guardian should not leave the monitoring range.
- Do not short circuit or squeeze the battery to avoid explosion.
- Do not mix different types of lithium batteries.
- The aircraft uses a rechargeable lithium battery, which needs to be removed for charging.
- Do not short-circuit, decompose, or throw the battery into fire. Do not place the battery in high temperature areas (e.g., near electric heating devices).
- Keep the aircraft away from other electrical equipment and magnetic objects to avoid mutual interference.
- Maintain a safe distance from high-speed rotating propellers to avoid scalp or cut injuries.
- The motor is a hot part; do not touch it to avoid burns.
- LEDs emit laser radiation; do not direct the light beam at others.
- Do not use the model near your ears; misuse may cause hearing damage.
- Use only the provided USB charging cable to charge the battery to prevent damage.
- In areas requiring radio control restrictions by relevant state departments, the model remote control should not be operated within city limits.
- Turn off the switch and unplug the battery when the aircraft battery is depleted. Charge after 30 minutes of rest to prevent battery damage.
2. Setup and Assembly
2.1 Package Contents
Ensure all items listed below are present in your package:
- Aircraft ×1
- USB charging cable ×1
- Fan blade ×4
- Lithium battery ×1
- Fan blade replacement tool ×1
- Screwdriver ×1
- Instructions ×1

2.2 Aircraft Part Identification

2.3 Fan Installation
If a fan blade needs replacement, use the provided tool. Ensure correct orientation:
- If A1/A2 blade is broken, replace with A1/A2.
- If B1/B2 blade is broken, replace with B1/B2.
- Note: Fan blades are printed with letters (A1, A2, B1, B2). A1=A2, B1=B2. Install correctly as per the diagram, otherwise the aircraft will not take off.

2.4 Remote Control Setup
To use mobile control, load your mobile phone onto the remote control holder as shown:

2.5 Battery Installation and Charging
Aircraft Battery:
- Buckle the battery lock of the aircraft.
- Remove the battery.
- Charging: Insert the USB interface of the charging line into a USB port (computer or 5V=2A power adapter). Connect the other end to the battery socket. The USB red light on the aircraft will turn off during charging and stay on when fully charged.
Warning: Only use the aircraft charging cable provided by the factory. Other charging cables may cause accidents.

Remote Control Battery:
- Remove the battery cover.
- Insert three 1.5V AAA batteries (not included) according to the polarity instructions.
Note:
- Ensure correct polarity (+/-).
- Do not mix old and new batteries.
- Do not mix different types of batteries.
2.6 Remote Control Part Identification
Familiarize yourself with the remote control layout:
| Control | Function |
|---|---|
| Throttle/Left and Right Lever | Controls altitude and rotation (rudder). |
| Accelerate Button | Increases speed. |
| Switch | Power on/off. |
| Advance Fine-tuning | Adjusts forward drift. |
| Left Fine-tuning | Adjusts left drift. |
| Reverse Fine-tuning | Adjusts backward drift. |
| Right Fine-tuning | Adjusts right drift. |
| Advance/Reverse/Left/Right Control Lever | Controls forward, backward, left, and right movement. |
| Indicator Light | Shows status. |
| Remote Control Mode/Induction Mode Button | Switches between control modes. |
| One-key Take-off/One-key Landing | Automated take-off and landing. |
| Emergency Stop (short press)/One-key Calibration (long press) | Stops motors or calibrates gyroscope. |
| Headless Mode (short press)/One-key Return (long press) | Activates headless mode or returns drone. |
| 360° Roll Button | Initiates 360-degree flips. |
3. Operating Instructions
3.1 Environmental Requirements Before Flight
Fly in an outdoor open environment without rain or snow, and with wind power less than 3. Stay away from people, trees, wires, tall buildings, airports, and signal transmission towers.
Warning: APP can only be used for viewing (photographed/recorded) when using the remote controller. The remote controller cannot be used when using the APP for control.
3.2 Pre-flight Preparation (Using Remote Control)
- Power On & Placement: Turn on the aircraft and place it on a horizontal plane. The front blue and red lights will flash, indicating frequency matching state.
- Remote Control Power On & Code-Matching: Press and hold the remote control's power switch. Push the throttle lever up to the top, then down to the end. Code-matching is successful when the aircraft lights change from flashing to solid.
- Horizontal Calibration: Long press the calibration key on the remote control. The aircraft's LED lights will flash. When they become solid, calibration is complete, and the remote control will emit a "beep."
- Start/Stop: Push the left control lever upward to take off. All indicator lights will be solid. Short press the one-key take-off/landing key to stop flying.
- One-key Take-off and Landing: After unlocking, gently press the "One Key Takeoff/Landing" key. The aircraft will automatically rise to about 1 meter and hover. Press it again to land slowly.
Warning: Ensure sufficient power for both aircraft and remote controller before attempting to take off.
3.3 Remote Control Flight Methods
- Ascend/Descend: Push the left joystick (throttle) up to ascend, down to descend.
- Turn Left/Right: Push the left joystick (rudder) left to turn the nose left, right to turn the nose right.
- Forward/Backward: Push the right joystick (rudder) up to move forward, down to move backward.
- Left/Right Sideways Flight: Push the right joystick (rudder) left to move left, right to move right.
3.4 360° Roll
Ensure the aircraft is about 1.5 meters above the ground. It's best to perform rolls during ascent to maintain height.
- Left Roll: Short press the 360° roll button, then push the right joystick left.
- Right Roll: Short press the 360° roll button, then push the right joystick right.
- Forward Roll: Short press the 360° roll button, then push the right joystick upward.
- Backward Roll: Short press the 360° roll button, then push the right joystick downward.
3.5 Headless Mode
The aircraft's initial front direction (when code-matching) is the default front in headless mode. To adjust, re-do code-matching. Short press the "headless mode" function key on the remote control to activate/deactivate.
Special Prompt: Ensure the aircraft is aligned straight for the gyroscope to detect it, enabling straight-line flight in headless mode.
3.6 One-Key Return
For long-distance flights, use the one-key return function. The remote control must face the aircraft's tail when code-matching. During flight, press and hold the one-key home button. The remote will "beep," and the aircraft will return. Operating any joystick will cancel the return function.
3.7 Speed Switching
The aircraft defaults to low-speed mode (3-geared switching) after take-off. Gently press the speed switch button:
- One "beep" for low-speed gear.
- Two "beeps" for medium-speed gear.
- Three "beeps" for high-speed gear.
3.8 Fine Tuning Function
- Forward/Backward Fine Tuning: If the aircraft drifts backward, press the forward fine-tuning key. If it drifts forward, press the backward fine-tuning key.
- Left/Right Fine Tuning: If the aircraft drifts right, press the left fine-tuning key. If it drifts left, press the right fine-tuning key.
3.9 Induction Mode & Inductive Roll
Press the remote control's induction switch button to enter induction mode. Keep your palm about 10 cm from the aircraft. If the aircraft flies too high, it will automatically descend after 5-15 seconds.
To perform an inductive roll, place both hands on the left and right inductive heads. After two seconds, the aircraft will automatically roll 360°.

3.10 Stop Flight & Throw Flight Mode
- Stop Flight: Take the aircraft and turn it upside down to stop flight.
- Throw Flight Mode: Turn on the aircraft, place it horizontally. If no remote control frequency matching occurs within 3 seconds, hold the aircraft, stretch it forward, wait for blue and red lights to flash slowly, then throw it upward or swing your hand downward. The aircraft will automatically take off.
3.11 APP Download and Installation
Scan the QR code below with your mobile phone to download the "4D FLY APP."
- Google System: Scan the QR code, open in browser, and download.
- iOS System: Scan the QR code to install from the App Store.
3.12 APP Connection
- Turn on the aircraft.
- On your mobile phone/iPad, go to Settings > Wireless Network. Find and connect to the device named "4DRC-4K-********".
- Open the "4D FLY" app.
- Click the "operation button" to enter the function menu.
3.13 Pre-flight Preparation (Using APP)
- Power On & Placement: Turn on the aircraft and place it on a horizontal plane. The front blue and red lights will flash, indicating frequency matching state.
- WiFi Connection & Frequency Matching: Turn on WiFi on your mobile device, select "4DRC_4K_********" from the list, and connect. Open the APP. Click "OFF", then turn on the touch rocker. Click the designated icon, and the aircraft lights will turn on normally, indicating successful frequency matching.
- Horizontal Calibration: In the APP interface, click the "correction" icon. The aircraft's LED lights will flash and then become solid, indicating calibration is complete.
- One-key Take-off and Landing: In the APP control interface, click the "one-key take-off" icon. During flight, press "one-key landing" to land slowly.
Note: Calibration must be completed only when the aircraft is placed on a horizontal plane.
3.14 APP Control Interface Functions
The APP interface provides various controls and settings:
- Media library, Record video, Take pictures, Return
- Speed level, Fixed height mode, Gravity sensor control, Show/hide control interface
- Menu, Rotate the image, VR mode, Lighting control, Headless mode, Calibrated gyroscope
- 360° roll, Orbit flight, Throttle control, Advance and reverse fine-tuning, Left and right rotation control, One key take off/landing
- Emergency stop, Voice control, Left and right flight fine tuning
- Flight attitude parameters, Interface settings (right-handed mode)
Special Prompt: The interface setting (right-handed mode) will turn the control interface operation lever horizontally, which is convenient for left or right-handed users.
3.15 Gesture Recognition
When facing the camera's front lens, click the gesture photo button in the APP to trigger photo or video functions.
Special Tip: Face the lens from about 2-3 meters away in good lighting and background for optimal gesture recognition.
- OK (Right Hand) Gesture Photographing: Stand 3m in front of the lens, raise your right hand, and make an OK gesture. After recognition, the aircraft will take a photo after a 3-second countdown.
- V Gesture Recording: Stand 3m in front of the lens, raise one hand, and make a V gesture. After recognition, recording will start. When another gesture is recognized, recording will stop (interval must be longer than 3 seconds).
3.16 Orbit Flight
When the control switch is on, click the track flight button to open the sketchpad. Draw a flight path with your finger on the drawing board, and the aircraft will follow that path.
4. Maintenance
To ensure the longevity and optimal performance of your 4DRC V8 Mini Drone, follow these maintenance guidelines:
- Cleaning: Regularly wipe the drone with a soft, dry cloth to remove dust and debris. Avoid using water or harsh chemicals.
- Propeller Inspection: Before each flight, check propellers for any damage, cracks, or deformation. Replace damaged propellers immediately using the provided replacement tool.
- Battery Care: Always disconnect the battery after use and before storage. Store batteries in a cool, dry place. Do not overcharge or over-discharge batteries.
- Motor Care: The motors can become hot during operation. Allow them to cool down before handling. Keep motors free from dust and obstructions.
- Storage: When not in use, store the drone and its accessories in a safe, dry place, preferably in its original packaging or a protective case, away from direct sunlight and extreme temperatures.
- Firmware Updates: Check the official 4DRC website or app periodically for any available firmware updates to ensure optimal performance and access to new features.
5. Troubleshooting
Refer to the table below for common issues and their solutions:
| Question | Reason | Solution |
|---|---|---|
| The aircraft indicator flashes without any response | The aircraft has insufficient power | Battery charging |
| The blades of the aircraft rotate but cannot fly | 1. Low battery 2. Blade deformation | 1. Charge the battery 2. Replace the blade |
| The aircraft vibrates badly | Blade deformation | Replace the blade |
| Fine tuning is done but still can't make the aircraft stable | 1. Blade deformation 2. Defective motor | 1. Replace the blade 2. Replace the motor |
| After the impact, start the aircraft again and it flies uncontrollably | The three-axis acceleration sensor loses its balance due to impact | Leave the aircraft stationary for 5-10 seconds, or correct it by correcting the level |
6. Specifications
| Feature | Specification |
|---|---|
| Brand Name | 4DRC |
| Model Number | 4D-V8 |
| Type | HELICOPTER |
| Material | Plastic |
| Drone Weight | about 32g |
| Takeoff Weight | about 55g |
| Dimensions | 13 x 11 x 4 cm |
| Video Capture Resolution | 1080p FHD, 720P HD, 2K QHD, 480P SD (depending on model) |
| Aerial Photography | Yes |
| Remote Control | Yes |
| Remote Distance | 80M |
| Controller Mode | MODE1, MODE2 |
| Control Channels | 4 channels |
| Flight Time | 10~20 minutes |
| Charging Time | 40 minutes |
| Charging Voltage | 3.7V |
| Power Source | Electric |
| Is Batteries Included | Yes (for drone) |
| Controller Battery | 3 x 1.5 AAA Battery (not included) |
| Motor Type | Brush Motor |
| State of Assembly | Ready-to-Go |
| Features | App-Controlled |
| Indoor/Outdoor Use | Indoor |
| Anti-wind Ability | <10km/h |
| Operator Skill Level | Beginner, Intermediate, Expert |
7. User Tips
- Battery Life: The drone's flight time is typically 7-10 minutes per battery. Charging takes approximately 55 minutes. For extended flight sessions, consider purchasing additional batteries.
- Beginner-Friendly: This drone is well-suited for beginner pilots due to its stable flight characteristics and various control modes.
- Value for Money: Users generally find the drone to perform well for its price point.
- Carrying Case: Some packages include a convenient carrying case for easy transport and storage of the drone and its accessories. Check your specific product variant for inclusion.
8. Warranty and Support
This product comes with a 15-day warranty period.
For detailed instructions, diagrams, and further information, please refer to the complete user manual available in PDF format: View User Manual (PDF)