1. Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your 36-inch Modern Low Floor Ceiling Fan Light with Remote Control. Please read all instructions carefully before beginning installation and keep this manual for future reference.
2. Safety Rules
- To reduce the risk of electric shock, ensure that the power has been turned off at the circuit breaker or fuse box before beginning.
- All wiring must comply with the National Electrical Code and local electrical codes. Electrical installation should be performed by a qualified and licensed electrician.
- WARNING: To reduce the risk of electric shock and fire, do not use this fan with any solid-state fan speed control device.
- WARNING: To reduce the risk of fire, electric shock, or personal injury, mount to an outlet box marked "Acceptable for Fan Support of 45 kg (99.12 lb) or less" and use the mounting screws provided with the outlet box. Most commonly used outlet boxes for lighting fixture support are not suitable for fan support and may need to be replaced. Due to the complexity of installing this fan, it is highly recommended to use a qualified and licensed electrician.
- The outlet box and support structure must be securely mounted and capable of reliably supporting a minimum of 45 kg. Use only UL-listed outlet boxes marked FOR FAN SUPPORT.
- The fan must be installed with a minimum clearance of 7 feet from the tip of the blades to the floor.
- Avoid placing objects in the path of the blades.
- To prevent personal injury or damage to the fan and other objects, use caution when working around or cleaning the fan.
- Do not use water or liquid cleaners to clean the fan or fan blades. A dry dusting cloth or a slightly dampened cloth will suffice for most cleaning.
- After making electrical connections, the spliced conductors should be turned upward and carefully tucked into the outlet box. The wires should be separated, with the grounded conductor and equipment grounding conductor placed on one side of the outlet box.
- Electrical diagrams are for reference only.
- The fan is suitable for indoor use only.
3. Tools Required
- Phillips Screwdriver
- Flathead Screwdriver
- Ladder
- Wire Stripper
- Electrical Tape
- Adjustable Wrench
- Wire Cutters
4. Package Contents
Unpack the fan and check the contents. You should have the following components:
- Hanging Bracket
- Motor
- Motor Housing
- Blades (3 pieces)
- Blade Screws
- Decorative Cover
- Receiver
- Remote Control
- 1/4" x 15 screws
- 6 Balance weights
- 7 Explosion screws
- 4 Washers
- 6 Self-tapping screws

Image: Overview of the ceiling fan components as packaged.
5. Installation
To ensure proper and safe installation, please follow these steps carefully. Refer to the full manual diagram for visual guidance.

Image: Comprehensive installation diagram for the ceiling fan, including mounting, wiring, and assembly steps.
5.1. Install the Mounting Bracket
To prevent personal injury and damage, ensure the hanging location allows the blades to have a clearance of 7.5 feet (2.3 meters) from the floor and 18 inches (45.72 centimeters) from any wall or obstruction.
- For Concrete Ceilings: First, mark the position for the ceiling fan. Then, drill two holes in the ceiling to secure the ceiling bracket using the two provided expansion screws. Attach the mounting bracket to the building structure with the provided expansion screws and tighten them. (Refer to Fig. 1 in the full manual diagram).
- For Wooden Ceilings: First, mark the position for the ceiling fan. Then, secure the mounting bracket to the building structure using the four provided wood screws. (Refer to Fig. 2 in the full manual diagram).
NOTE: After installation, the hook must be capable of supporting a weight of 45 kg (99 lbs) or more.
5.2. Receiver Installation
To install the ceiling fan, follow the steps below:
- Install the Motor: Unscrew the four mounting bracket screws from the ceiling. Connect the bracket and secure it to the motor using the screws.
- Install the Remote Control: Connect the motor wires and receiver wires according to their matching colors. (Please refer to the remote control manual for details.)
- Install the Cover: Place the cover over the motor. Rotate it clockwise and secure it to the mounting bracket.
5.3. Electrical Connections
Make electrical connections from the house wiring and fan motor to the remote receiver as shown in the diagram below. Ensure all connections are secure.
House Wiring
- Black Wire
- Red or White Wire
Fan Wiring
- Blue
- Red
- Pink
- Gray
Receiver Wiring
- Black
- Red
- Pink
- Gray
Note: The remote receiver must match the same control code.
Light Wiring Diagram:
| Wire Type | Connection |
|---|---|
| Light Live Wire | Black Wire |
| Light Neutral Wire | White Wire |
| To motor wire | Red or White Wire |
| To motor wire | Pink |
| To motor wire | Gray |
| Antenna Wire | Black Wire |
Note: The remote receiver must match the same control code.
5.4. Fan Assembly and Light Fixture Installation
- Install the Blades: Secure each fan blade to the motor using the provided screws. Attach all three blades one by one in sequence.
- Install the Decorative Cover: Tighten the decorative cover onto the motor assembly.
- Install the Light Kit: After securing the blades, install the light kit. (Do not install the blades in the opposite direction).
- Connect LED Wires: After securing the light kit, connect the LED wire terminals.
- Final Step: Rotate the glass cover clockwise to tighten it. Verify that the fan operates at low speed. Installation is now complete.
6. Operation
Your ceiling fan is controlled by a remote control, offering convenience and versatility. The remote control allows for:
- 3-Color Dimming: Adjust the light color temperature (e.g., warm, neutral, cool white).
- 6-Speed Regulation: Select from six fan speeds to achieve your desired airflow.
- Intelligent Timing: Set a timer for the fan to turn off automatically (e.g., 1H, 2H, 4H).
- Forward and Reverse Rotation: Change the direction of the fan blades for seasonal use (downward airflow for cooling in summer, upward airflow for circulating warm air in winter).
- Light On/Off: Toggle the light independently of the fan.
- Fan On/Off: Turn the fan on or off.
- All Off: Turn off both the fan and light.

Image: Remote control unit for the ceiling fan, showing various function buttons.
7. Maintenance
To maintain the appearance and performance of your ceiling fan:
- Do not use water or liquid cleaners to clean the fan or fan blades.
- A dry dusting cloth or a slightly dampened cloth will suffice for most cleaning.
- Regularly check all connections and screws to ensure they remain tight.
8. Troubleshooting
8.1. Fan Fails to Start
- Check circuit breakers or fuses.
- Verify all wiring connections between the power supply and fan, including switch connections in the junction box. WARNING: Ensure main power is turned OFF before inspection.
- If the fan beeps but doesn't respond to remote commands after power-on: Do NOT repeatedly press remote buttons. Immediately cut power. Check for loose wiring between motor and receiver. If necessary, disconnect and reinstall connections properly.
8.2. Fan is Noisy
- Ensure all motor housing screws are securely tightened.
- Verify that the screws securing the fan blade bracket to the motor hub are properly tightened.
- Check that wire nut connections are not rubbing against each other or the inner wall of the junction box. WARNING: Ensure the main power is turned OFF before inspection.
- Allow a 24-hour "break-in" period. Most noises associated with a new fan will disappear during this time.
- If using an optional light kit: Ensure the glass cover screws are firmly tightened. Verify that the light bulb is securely installed.
- Some fan motors are sensitive to solid-state variable speed controls. If you have installed this type of control, remove it and install a compatible alternative.
- Confirm the top of the canopy has slight clearance from the ceiling. It should not touch the ceiling.
- If the noise persists after following these steps, contact the manufacturer for assistance.
9. Specifications
| Feature | Specification |
|---|---|
| Item Type | Ceiling Fans |
| Brand Name | ludengchaoshi |
| Style | Modern Style |
| Body Material | ABS, IRON |
| Installation Method | Assembly |
| Control Method | REMOTE CONTROL |
| Is Bulbs Included | Yes |
| Power Source | AC |
| Luminous Flux | 2000-82000 |
| Certification | CE, ROHS |
| Origin | Mainland China |
| Motor | DC Silicon Steel Motor |
| Diameter | 90CM (36 inches) |
| Fan Blade Material | ABS fan blade |
| Lamp Panel Diameter | 18CM |
| Lighting Wattage | 24W |
| Applicable Space | 5-25 m² |
| Height | 20CM |
9.1. Dimensions Overview



10. User Tips
- Many users report that the fan operates very quietly, even at higher speeds, while still providing excellent airflow.
- Installation is generally straightforward, with some users completing it within an hour. The Korean assembly instructions are also available in the provided PDF manual.
- The ability to change the light tone (3-color dimming) is a highly appreciated feature for versatility.
- For many, fan speeds 1 or 2 are sufficient for comfortable airflow, even in larger rooms.
- While the fan is generally stable, some users have noted a slight shake at the highest speed (level 6). Ensure all mounting screws are securely tightened during installation.
11. Documentation and Support
For a more detailed guide, including Korean assembly instructions, please refer to the official user manual PDF available at: User Manual (PDF).
For further assistance or inquiries, please contact the manufacturer or your retailer.