grandnavi MS-20RV

Contents

GRANDnavi MS-20RV Marine Stereo User Manual

Waterproof Bluetooth FM AM Digital Media Audio Player

GRANDnavi MS-20RV Marine Stereo front view

Front view of the GRANDnavi MS-20RV Marine Stereo, highlighting its main features like USB, Bluetooth, AUX, FM Radio, EQ, and IPX5 waterproof rating.

1. Important Safety Information

Please read all safety information and instructions carefully before installing and operating your GRANDnavi MS-20RV Marine Stereo. Failure to follow these instructions may result in damage to the product, property, or personal injury.

  • Install this product in a dry, well-ventilated location. If a dry environment is not available, choose a location not exposed to heavy splashing.
  • While water-resistant (IPX5 rated), this product should never be submerged or subjected to high-pressure water spray.
  • Do not mount in engine compartments or areas of extreme heat. Avoid areas exposed to heaters or hot air.
  • Securely mount the unit to prevent it from coming loose due to collision, jolts, or vibrations.
  • Before drilling, check behind the mounting surface to avoid damaging exterior panels, fuel tanks, gas/brake lines, wiring harnesses, or other vital systems.
  • Do not run system wiring outside or underneath the vehicle/vessel, as this is extremely dangerous.
  • Protect all system wires from sharp edges and wear by careful routing, tying them down, and using grommets/loom where appropriate. Secure wiring with cable ties or clamps.
  • Never make power connections with a "live" wire. Ensure all connections are safe, tight, and high-integrity to prevent fire and extensive damage.

2. Product Overview

2.1 What's Included

  • (1) MS-20RV Media Source Unit
  • (1) Power Connections Wire Harness
  • (1) Mounting bracket
  • (4) Mounting screws
  • (1) User manual (this document, also available as PDF: View PDF)

2.2 Key Features

The GRANDnavi MS-20RV is a weather-tight source unit designed for marine and powersports applications, offering robust performance and versatile audio options.

  • Water-Resistant Design: IPX5 rated chassis and display built to withstand harsh elements (water and mudproof).
  • Clear Display: Easy-to-read, high-brightness Negative LCD display (2.8 inches) with large controls for marine/powersports use.
  • Digital Tuner: Integrated AM/FM radio with multi-band acceptance.
  • USB Connectivity: Direct-digital connection for music files from USB storage devices (up to 64GB), supporting MP3, WMA, FLAC, AAC, APE.
  • Bluetooth Audio: Receives high-quality sound from compatible devices with playback control and a stable BT chip.
  • Audio Outputs: 2 Sets of 2V RMS line-level outputs for crystal-clear audio signals to amplifiers/speakers (200W peak output for 4CH).
  • Auxiliary Input: Accepts audio signals from any source with line-level outputs.
  • Sound Customization: 5-band preset EQ (POP, ROCK, CLASSIC, JAZZ, FLAT, EQ OFF) and sound effects adjustment.
  • User-Friendly Controls: 7 color buttons and an all-in-one crisp knob for easy operation under various lighting conditions.
GRANDnavi MS-20RV display showing EQ and Time Set, with application examples

Display showing 5-band preset EQ (ROCK) and Time Set. The unit is suitable for Motorcycles, Yachting, Golf Carts, and ATVs.

GRANDnavi MS-20RV installed on a boat, highlighting water/mudproof features

The MS-20RV is water/mudproof (IPX5 rated), blocking water and mud to prevent display fogging.

GRANDnavi MS-20RV display and controls

Features a 2.8" clear LCD display, 7 color buttons, and an all-in-one crisp knob for easy visibility and use.

GRANDnavi MS-20RV Bluetooth audio streaming

Supports AM/FM radio and audio streaming via Bluetooth with a stable BT chip. Stores up to 30 stations.

GRANDnavi MS-20RV connectivity options

Offers 200W peak output for 4-channel speakers/amplifiers, USB input (up to 64GB), AUX-IN, and MP3 playback.

3. Setup and Installation

3.1 Installation Applications

This product is designed for operation with 12-volt, negative-ground electrical systems. Using it in systems other than 12 volts may cause damage and void the warranty. This product is not certified or approved for use in aircraft.

3.2 Mounting Installation

Important: Before drilling or cutting, ensure adequate space behind the mounting surface for the source unit and its wire harness. Do not mount this unit where it can be submerged in water.

  1. Choose a mounting location on the dashboard or instrument panel that allows room behind for radio cables to the power source. Consider how you will use the AUX IN, LINEOUT, and USB connectors and route appropriate extension cables to an accessible area.
  2. Cut a hole in the dashboard using a template (typically provided in the manual's back). At least 3 3/4" (95mm) depth is needed to mount the radio.
  3. Slide the included spring washers over the screw posts and attach the screw posts to the back of the radio.
  4. Place the radio in front of the dashboard opening so the wiring can be brought through.
  5. After completing wiring connections, turn the radio on to confirm operation (vehicle accessory switch must be on). If it doesn't operate, recheck all wiring. Once proper operation is achieved, turn the accessory switch off and proceed with final mounting.
  6. Insert the radio into the mounting hole.
  7. Place the "U" bracket over the screw posts and secure the radio to the dash using the included hex nuts. If necessary, cut the score marks on either side of the mounting bracket to custom fit its length.

Installation Dimensions:

  • Front Panel Width: 110mm (4.33")
  • Mounting Depth: 99.5mm (3.92")
  • Unit Height: 73.4mm (2.89")
  • Unit Width (body): 72mm (2.84")
  • Mounting Hole Diameter: Φ75mm (3")
  • Mounting Hole Depth: 95mm (3.75")

3.3 Wiring Diagram

The wiring harness connects to the back of the unit. Ensure all connections are secure and correctly matched to prevent damage.

Power and Ground Connections:

  • Yellow Wire: Switched 12V+
  • Black Wire: Ground
  • Blue Wire: Auto Antenna

Speaker Connections (4-Channel Output):

  • Rear Left: Green (+) / Green/Black (-)
  • Rear Right: Violet (+) / Violet/Black (-)
  • Front Right: Gray (+) / Gray/Black (-)
  • Front Left: White (+) / White/Black (-)

RCA Outputs (To Amplifier):

  • AUX-IN R: Red RCA
  • AUX-IN L: White RCA
  • Front Out R: Red RCA
  • Front Out L: White RCA
  • Rear Out R: Red RCA
  • Rear Out L: White RCA
  • Subwoofer: Green RCA

Other Connections:

  • ANT: Antenna input
  • USB: USB Storage Media input

4. Operating Instructions

4.1 Panel Functions

The front panel features an LCD display and various buttons and a knob for controlling the unit.

  1. LCD: Displays current status, station, track information, etc.
  2. POWER/VOL+/-/SEL: Press to turn ON/OFF, rotate to adjust volume, press to select functions.
  3. Play/Pause/Next Track: (Right arrow icon)
  4. Previous Track: (Left arrow icon)
  5. EQ SETTING: Press to cycle through equalizer presets.
  6. MUTE/Clock: Press to mute/unmute, long press to set clock.
  7. MODE: Press to switch between audio sources (Radio, USB, AUX, BT).
  8. BAND/AMS: Press to select radio band (FM1, FM2, FM3, AM1, AM2), long press for auto search/store.
  9. PRESET STATION TUNE UP/PAUSE: (CH+) Short press to tune up preset, long press for manual search. In USB/BT, play/pause.
  10. PRESET STATION TUNE DOWN/RDM/RPT: (CH-) Short press to tune down preset, long press for manual search. In USB/BT, select repeat/random.

4.2 General Control Functions

ControlFunction
Power (SEL knob)Press to turn ON, Press and hold 3 seconds to turn OFF.
Volume+/- (SEL knob)Rotate SEL knob to adjust volume (0-40). When in selection function, decrease/increase value.
SEL (button)Press to select functions: BASS, TREBLE, BALANCE, FADER, LOUD, EQ, DX, STEREO, SUBWOOFER. Rotate knob to control subwoofer on/off.
Bass/TrebleAdjust Bass/Treble (-7 to +7).
Fade/BalanceAdjust Fade (10R-10F), Balance (10L-10F).
LOUDPress SEL knob to choose Loud ON/OFF.
EQPress SEL knob to choose EQ: POP, ROCK, CLASSIC, JAZZ, FLAT, EQ OFF.
DX (FM only)Press SEL knob to choose DX or LOCAL.
STEREO/MONO (FM only)Press SEL knob to choose STEREO or MONO.
MUTEShort press to mute/unmute sound.
CLK (Clock)Press and hold [MUTE/CLK] to enter clock setup. Rotate knob to set hour/minutes, short press SEL to switch. Long press to save.
MODEShort press to switch between Radio, USB, AUX, BT.
BANDIn radio mode, repeatedly press to choose band (FM1-FM3, AM1-AM2). In USB mode, long press 3 seconds to enter track selection (rotate SEL knob).
AMSIn radio mode, press and hold [BAND/AMS] 3 seconds to auto search and store stations.
Previous Track / Tune Down(AM/FM) Short press to step down, long press 3 seconds for manual search. (USB/BT) Short press for previous track, long press for fast reverse.
Next Track / Tune Up(AM/FM) Short press to step up, long press 3 seconds for manual search. (USB/BT) Short press for next track, long press for fast forward.
CH+(FM/AM) Tune up preset station. (USB/BT) Play and Pause playback.
CH- / RDM / RPT(FM/AM) Tune down preset station. (USB/BT) Select REPEAT 1, REPEAT ALL, REPEAT DIRECTORY, RANDOM.

4.3 Bluetooth Operation

  1. Turn on Bluetooth on your cellphone or other device.
  2. Search for the Bluetooth device name "CAR BT".
  3. Select "CAR BT" and press match or connect.
  4. When the connection is successful, "CONNECT" will display on the LCD screen.
  5. If pairing is successful, the Bluetooth icon will be shown in POWER/MODE function mode.
  6. In BT AUDIO mode, you can play music from your phone or connected device.

5. Maintenance

The GRANDnavi MS-20RV is designed for durability in harsh environments. To ensure its longevity and optimal performance:

  • Cleaning: Use a soft, damp cloth to wipe the unit clean. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the display or finish.
  • Connections: Periodically check all wiring connections to ensure they remain tight and free from corrosion, especially in marine environments.
  • Protection: While waterproof, avoid prolonged exposure to direct sunlight when not in use, as this can degrade plastic components over time.
  • USB Port: Keep the USB port covered when not in use to prevent water and debris from entering.

6. Troubleshooting

ProblemPossible CausePossible Solution
Unit doesn't turn onFaulty fuseCheck the fuse and replace if blown.
Unit doesn't turn onPoor connection integrityCheck "Ground" and "+12VDC" connections for pinched wires; ensure tight connections.
No or low soundMute or Pause is onUnmute or start to playback.
No or low soundVolume is turned downIncrease the volume if necessary.
No or poor tuner receptionPoor connection integrityCheck antenna cable for pinched wires; ensure tight connections.
USB connection not working / chargingPoor connection integrityCheck USB cable for pinched wires; ensure tight connections.

7. Specifications

7.1 Electrical Specifications

  • Operating Voltage: 12V DC (10V - 15.9V allowable)
  • Standby Current Draw: 5mA
  • Fuse Value: 15 A

7.2 Audio Outputs/Inputs

  • Output Channels: 4 stereo pairs of RCA plugs
  • Maximum Output Voltage: Absolute: 1V RMS
  • Input Channels: 1 stereo pair of RCA plugs

7.3 Tuner

  • FM Tuner: 87.5 MHz to 107.9MHz (0.2MHz step)
  • AM Tuner: 530kHz to 1710 kHz (10kHz step)

7.4 Bluetooth®

  • Profile: A2DP

7.5 USB

  • Interface: USB 2.0
  • Maximum Current Output: 1 A
  • Supported Audio Formats: MP3, WMA, FLAC, AAC, APE

7.6 Dimensions

  • Unit (Diameter x Depth): Φ113mm (4.45") x 99.5mm (3.95")
  • Mounting Hole (Diameter x Depth): Φ75mm (3") x 95mm (3.75")

8. User Tips

  • Check All Functions: After installation, take a moment to test all audio sources (FM, AM, USB, AUX, Bluetooth) and controls (volume, EQ, mute) to ensure everything is working as expected.
  • Bluetooth Pairing: If you have trouble connecting via Bluetooth, ensure no other devices are currently paired with the "CAR BT" unit and try restarting Bluetooth on your mobile device.
  • USB Compatibility: For best results, use USB drives formatted to FAT32. If your USB drive isn't recognized, try a different drive or ensure it contains supported audio formats.
  • Mounting Measurements: For precise installation, refer to the "Installation Dimensions" and "Dimensions" in the Specifications section (Section 3.2 and 7.6) for exact hole sizes and unit clearances.

9. Warranty and Support

For warranty information and technical support, please refer to the seller's policies or contact the GRANDnavi customer service directly. Keep your proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.