M5Stack Cardputer v1.1

Contents

M5Stack Cardputer v1.1 User Manual

ESP32-S3 Portable Computer Development Board

Introduction

The M5Stack Cardputer v1.1 is a compact, card-sized portable computer development board based on the ESP32-S3 microcontroller. It features a 1.14-inch IPS LCD screen, a 56-key QWERTY keyboard, and integrated peripherals such as a speaker, microphone, IR transmitter, and MicroSD card slot. Designed for developers and enthusiasts, it offers a versatile platform for various applications, from digital protocol exploration to custom Arduino-like projects.

M5Stack Cardputer v1.1 front view with screen showing 'SCAN RECORD CHAT' and 'ESP NOW'
Front view of the M5Stack Cardputer v1.1, showcasing its screen and keyboard.

Setup

1. Preparation: M5Burner and Firmware

To prepare your Cardputer for development, you will need to download the M5Burner firmware flashing tool and the appropriate firmware. The Cardputer is an open-source IoT development board with an erasable system, allowing for secondary programming modifications. If you encounter operational issues, re-flashing the factory firmware can resolve them.

Refer to the official M5Burner tutorial for detailed instructions on downloading and using the tool: M5Burner Tutorial

Diagram of Cardputer v1.1 components and layout
Detailed diagram illustrating the components and layout of the Cardputer v1.1.

Once M5Burner is installed, select the official factory firmware, typically named "Cardputer User Demo", for download within the application.

M5Stack Cardputer v1.1 angled view
Angled view of the M5Stack Cardputer v1.1.

2. USB Driver Installation

Before flashing firmware, ensure the necessary USB drivers are installed for your operating system. The driver package for the CP34X (for the CH9102 version) is commonly required. If you encounter issues during program download, such as timeouts or "Failed to write to target RAM" errors, reinstalling the device driver is recommended.

For MacOS users, the CH9102 VCP driver can be downloaded from: CH9102 VCP MacOS Driver

For Windows users, search for "CH9102 VCP SER Windows driver" to find the appropriate package.

3. Port Selection

Connect your Cardputer to your computer using a USB cable. After the driver installation is complete, open M5Burner and select the correct device port. On MacOS, if multiple ports are available, choose the one named "wchmodem".

M5Burner interface showing port selection for Cardputer
M5Burner interface displaying options for port selection before flashing.

4. Burn Firmware

Once the firmware is downloaded and the correct port is selected in M5Burner, click the "Burn" button to initiate the flashing process. The tool will display the progress, and a success message will appear upon completion.

M5Burner interface showing firmware burning progress
M5Burner interface showing the firmware burning process and completion message.

Operating Instructions

The M5Stack Cardputer v1.1 is a highly programmable device. Its operation largely depends on the firmware loaded onto it. The factory firmware typically provides a demo interface with functions like scanning, recording, and chat. For custom applications, users can develop and upload their own code using the ESP-IDF, Arduino IDE, or UIFlow platforms.

Refer to the specific documentation for the firmware you are using for detailed operational instructions.

Hand holding Cardputer, screen showing 'WiFi Web' and 'Select terminal type'
Cardputer screen displaying Wi-Fi options and terminal selection.

Maintenance

  • Cleaning: Use a soft, dry cloth to clean the device. Avoid using liquids or abrasive cleaners.
  • Storage: Store the Cardputer in a cool, dry place away from direct sunlight and extreme temperatures.
  • Battery Care: For optimal battery life, avoid fully discharging the device frequently. If storing for extended periods, charge the battery to around 50%.
  • Firmware Updates: Regularly check the M5Stack official website for firmware updates to ensure optimal performance and access to new features.

Troubleshooting

Q1: Why is my Cardputer v1.1 black screen/won't boot?

If your Cardputer displays a black screen or fails to boot, it is often due to an issue with the loaded firmware. This is not necessarily a hardware malfunction, especially with open-source development boards where firmware can be easily modified or corrupted.

Solution: Re-flash the official factory firmware, specifically the "Cardputer User Demo," using the M5Burner tool. Follow the steps outlined in the "Setup" section to download and burn the correct firmware. This process is similar to reinstalling an operating system on a computer.

Cardputer connected to a power bank, screen showing a spectrum analyzer graph
Cardputer displaying a spectrum analyzer graph, indicating functionality after potential troubleshooting.

Q2: Why is the working time only 3 hours? Why does it charge to 100% in 1 minute and turn off when the charging cable is removed?

These symptoms strongly suggest an issue with the battery or power management, often exacerbated by unofficial firmware. Flashing unofficial firmware can void your warranty, cause instability, and expose your device to security risks.

Solution:

  1. Revert to Official Firmware: Immediately re-flash the official factory firmware using M5Burner. Unofficial firmware can sometimes interfere with power management or provide incorrect battery readings.
  2. Check Battery Connection: Ensure the internal battery is securely connected. The Cardputer has a 1400mAh main battery and a 120mAh internal battery.
  3. Inspect Charging Cable/Port: Try a different USB-C cable and power source to rule out external issues.
Internal board of Cardputer, showing components and pinout
Internal view of the Cardputer board, highlighting battery connections and other components.

Important Note: If you have burned third-party open-source firmware and encounter problems, please re-flash the official factory firmware. Otherwise, M5Stack reserves the right to deny after-sales support.

Specifications

FeatureSpecification
Brand NameM5Stack
ModelCardputer v1.1
TypeESP Series (ESP32-S3FN8)
OriginMainland China
Display1.14" IPS-LCD, 240x135 px (ST7789V2)
Keyboard56-Key QWERTY (4x14 matrix)
MicrophonePDM-MIC (SPM1423)
Speaker1W (I2S-SPEAKER@NS4168)
Main Battery1400mAh
Internal Battery120mAh
ConnectivityWiFi, USB-C, MicroSD Card Slot, Grove Port (G5V G2 G1)
Other PeripheralsIR Transmitter (IRG44), Reset Button, Go Button
Dimensions84 x 54 x 19.7 mm

User Tips

  • Expand Functionality: Consider adding accessories like a LoRa or GPS module to expand the Cardputer's capabilities for various projects.
  • Community Firmware: While official firmware is recommended for stability, the Cardputer community offers alternative launchers and firmwares (e.g., bmorcelli's launcher, Bruce firmware) that enable running compiled Arduino sketches from an SD card or OTA repository, similar to other versatile tools. Exercise caution and understand potential risks when using unofficial firmware.
  • Versatile Tool: The Cardputer is highly versatile for exploring digital protocols, working with Arduino-like modules, and experimenting with Bluetooth, Wi-Fi, and other radio signals.
  • Front-Mount GPIO: The front-mounted GPIO pins offer convenient access for connecting external components and sensors.
  • Wi-Fi Scanning: The device is capable of picking up and analyzing Wi-Fi signals, making it useful for network diagnostics and experimentation.

Frequently Asked Questions (FAQ)

Q: What does the Cardputer v1.1 have preinstalled?

A: The Cardputer v1.1 typically comes with a factory firmware preinstalled, often referred to as the "Cardputer User Demo." This firmware usually includes basic functionalities for demonstration and initial interaction, such as scanning, recording, and chat features.

Q: What are the differences between the old version and the new version?

A: Specific details regarding differences between older versions and the v1.1 model are not provided in this manual. Users are encouraged to consult the official M5Stack documentation or product pages for detailed version comparisons.

Warranty and Support

For warranty information, technical support, and additional resources, please refer to the official M5Stack website or contact their customer service. It is recommended to keep your proof of purchase for warranty claims.

An official user manual in PDF format is available for download: Download User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.