GMAIPOP Dual Lens Car DVR

Contents

GMAIPOP Dual Lens Car DVR User Manual

Model: Dual Lens Car DVR

Introduction

Thank you for purchasing the GMAIPOP Dual Lens Car DVR. This device is designed to provide reliable video recording of your journeys, both from the front road view and the interior cabin. It features Full HD 1080P recording, a wide 170° view angle, G-Sensor for collision detection, loop recording, and enhanced night vision capabilities. Please read this manual carefully before use to ensure proper operation and maintenance.

GMAIPOP Dual Lens Car DVR with screen displaying road view and key features listed

Image: GMAIPOP Dual Lens Car DVR highlighting its features including motion detection, 170° view angle, dual cameras, G-Sensor, loop recording, and night vision.

Safety Precautions

  • The dash cam's built-in battery (150mAh) is primarily designed to maintain date, time, and settings. It is not intended for extended operation without external power.
  • Always use the original car charger included in the box. Mobile phone chargers or standard USB cables are not supported for powering the dash cam, as they may cause the rear/cabin camera to malfunction or prevent the dash cam from powering on.
  • Ensure the car charger is connected for daily use to provide constant power to the unit. If power is interrupted, the unit will shut down.
  • If you encounter an "SD Card error," please reset the dash cam or reinsert and format the SD card.
  • For any other issues, please contact our support team.

Product Overview

Familiarize yourself with the components and controls of your dash cam:

Front view of the GMAIPOP Dual Lens Car DVR

Image: Front view of the GMAIPOP Dual Lens Car DVR unit.

Close-up of the dash cam's side showing ports

Image: Close-up of the dash cam's side, showing the Type-C, TF (Micro SD), AV, and MIC ports.

Dash Cam Components:

  1. Power/OK Button: Controls power and confirms selections.
  2. Down Button: Navigates menus downwards or switches display.
  3. Up Button: Navigates menus upwards or mutes audio.
  4. Menu Button (M): Accesses playback mode and settings menu.
  5. RESET Hole: Used to reset the device.
  6. AV-IN Port: Connects to the cabin (rear) camera.
  7. TF Card Slot: For inserting the Micro SD (TF) memory card.
  8. Mini USB Power Interface: Connects the car charger for power.

Setup

1. Installing the Micro SD Card

  1. Ensure the dash cam is powered off.
  2. Insert a Class 10 or higher Micro SD (TF) card into the TF Card Slot (7) until it clicks into place. The maximum supported external memory is 64GB.
  3. To remove, gently push the card until it springs out.

2. Mounting the Dash Cam

  1. Attach the dash cam to your windshield using the provided suction cup mount. Choose a location that does not obstruct your view of the road.
  2. Adjust the angle of the camera to ensure a clear view of the road ahead.

3. Connecting Power

  1. Connect the original car charger to the Mini USB Power Interface (8) on the dash cam.
  2. Plug the other end of the car charger into your vehicle's cigarette lighter socket.
  3. The dash cam will typically power on automatically when the vehicle starts and begin recording.

4. Connecting the Cabin Camera (Optional)

  1. Connect the cabin camera cable to the AV-IN Port (6) on the main dash cam unit.
  2. Mount the cabin camera to capture the interior of your vehicle. The cabin camera can be rotated for optimal positioning.

Operation

Button Functions:

Button Action Function
Power/OK (1) Long-Press (2-3s) Turn ON/OFF the Camera
Short-Press Start/Stop Video Recording; Play/Pause current video in Playback Status; Enter/Save settings in Menu
DOWN (2) Short-Press Scroll DOWN in Menu; Switch display windows (front, cabin) in recording status; Scroll to next video files in Playback Status
UP (3) Short-Press Scroll UP in Menu; Mute Audio Recording in Video Mode
MENU (M) (4) Short-Press (Non-Recording) Enter Playback Modes (press again to exit)
Long-Press (Non-Recording) Enter Settings Menu (press again to exit)
Short-Press (Recording) Lock the current video file
RESET Hole (5) Press with a thin object Reset the Dash Cam

Recording Features:

  • Loop Recording: The dash cam continuously records, overwriting the oldest unlocked files when the memory card is full. This ensures you always have the latest footage.
  • G-Sensor: In the event of a sudden impact or collision, the built-in G-Sensor automatically detects the event and locks the current video file, preventing it from being overwritten.
  • Night Vision: Equipped with advanced night vision technology (IMX 335 Sensor, 6-Glass Lens, WDR Tech, f1.6 Aperture), the dash cam enhances clarity in low light conditions. The cabin camera also features IR LEDs for clear interior recording at night.
  • Audio Recording: The dash cam records audio inside the car. You can mute audio recording by short-pressing the UP button during video mode.
Super Night Vision features of the dash cam

Image: Details of the dash cam's Super Night Vision capabilities, including sensor, lens, WDR technology, and aperture.

G-Sensor and Loop Recording demonstration

Image: Visual explanation of G-Sensor activation during a collision and continuous loop recording.

Display Modes:

The dash cam features a 3.16-inch IPS touch screen. You can switch between different display modes:

3.16 inch IPS screen of the dash cam

Image: The dash cam's 3.16-inch IPS screen, showing its display area.

Five different screen switching options

Image: Illustration of the five screen switching options: Front, various Front+Rear split views, and Back camera view.

  • Front: Displays only the front camera view.
  • Front + Rear: Displays both front and cabin camera views, often in a split-screen or picture-in-picture format.
  • Back: Displays only the cabin camera view.

Short-press the DOWN button (2) to switch between these display windows during recording status.

Playback

Method 1: Playback on a PC

  1. Stop recording on the dash cam.
  2. Safely remove the Micro SD card from the dash cam.
  3. Insert the Micro SD card into a card reader connected to your computer.
  4. Access the video files on the card and play them using a compatible media player.

Method 2: Playback on the Dash Cam

  1. Stop any active recording.
  2. Short-press the MENU (M) button (4) to enter Playback Mode. The screen will show the playback interface.
  3. Use the UP (3) and DOWN (2) buttons to scroll through and select video files.
  4. Short-press the Power/OK button (1) to play or pause the selected video.
  5. To delete or protect a current file, long-press the MENU (M) button (4) while in Playback Mode.
  6. To exit Playback Mode, short-press the MENU (M) button (4) again.

Maintenance

  • SD Card Formatting: Regularly format your Micro SD card (at least once a month) to ensure optimal performance and prevent data corruption. This can usually be done through the dash cam's settings menu.
  • Cleaning: Use a soft, dry cloth to clean the dash cam's lenses and screen. Avoid using abrasive cleaners or solvents.
  • Storage: When not in use for extended periods, store the dash cam in a cool, dry place away from direct sunlight.

Troubleshooting

  • Dash Cam Fails to Power On or Rear Camera Not Activating: Ensure you are using the original car charger provided. Mobile phone chargers or standard USB cables are not compatible for continuous power.
  • "SD Card Error" Message: Try resetting the dash cam using the RESET hole (5). If the issue persists, reinsert the SD card, or format it through the dash cam's settings. If the problem continues, try a different compatible Micro SD card.
  • Dash Cam Shuts Down Unexpectedly: Verify that the car charger is securely connected and providing constant power. The internal battery is only for settings retention, not continuous operation.
  • General Issues: If you encounter any other problems, please refer to the full user manual (PDF) or contact our after-sales support team.

Specifications

Feature Specification
Brand NameGMAIPOP
Item TypeCar DVR (Portable Recorder)
Number Of Lenses2
Camera Resolution1920x1080 (FHD)
Pixels200Mega
View Angle170°
ApertureF2.0
Video CodeH.264
Video FormatAVI
Frames Per Second30
DisplayIPS
Screen Ratio16:9
Built-in ScreenYes
Touch ScreenYes
Max External Memory64G
Memory Card Required Reading SpeedClass 10
Loop-Cycle Recording FeatureYes
Audio RecordedYes
NightShot FunctionYes
Special FeaturesG-Sensor, Display Rotate, SD/MMC Card, Real Time Surveillance
Power SourceCorded Electric
BatteryBuilt-in (150mAh)
Cable Length3m
InterfaceAV-In, Micro SD/TF
CertificationCE
OriginMainland China

User Tips

  • Battery Life: The built-in battery is small (150mAh) and primarily for saving settings. For continuous recording, especially for parking monitoring, the dash cam must be connected to your car's power source. It is not designed to operate for extended periods on battery alone.
  • Internal Camera Flexibility: The cabin camera can often be disconnected or easily removed if you only wish to record the road ahead. Its rotation allows for flexible positioning to capture the interior as needed.
  • Charging/Power: Always use the provided car charger. Avoid using power banks or generic USB-C chargers for primary power, as they may not supply sufficient or stable power, leading to malfunctions.
  • Recording Duration: The total recording time depends on the size of your Micro SD card and your loop recording settings. With loop recording, older files are automatically overwritten when the card is full, ensuring continuous recording.
  • Parking Monitoring: While the G-Sensor can detect impacts when parked, for continuous parking surveillance, consider a hardwire kit (not included) to provide constant power without draining your car battery.

Warranty and Support

This product comes with a 1-year warranty. For technical assistance, troubleshooting beyond what is covered in this manual, or warranty claims, please contact our after-sales support team.

A detailed user manual in PDF format is available for download: View User Manual (PDF)

© 2024 GMAIPOP. All rights reserved.

Made in China


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.