SEAMETAL D40792

Contents

SEAMETAL LED Car Door Opening Warning Atmosphere Light User Manual

Brand: SEAMETAL | Model: D40792

1. Introduction

Thank you for choosing the SEAMETAL LED Car Door Opening Warning Atmosphere Light. This product is designed to enhance vehicle safety by providing a clear warning light when car doors are opened, while also adding an aesthetic ambient light. Its compact design and magnetic attachment make it suitable for most car models. Please read this manual carefully before installation and use to ensure proper function and longevity of the product.

2. Product Overview

The SEAMETAL LED Car Door Light features a strong magnetic adsorption for easy installation and removal, allowing for convenient charging. It is designed to be mini and compact, ensuring it does not interfere with the car door's normal operation. The light offers multiple modes including colorful, breathing, monochrome, and flash, providing both safety and style. When the door is opened, the light illuminates the ground, preventing accidental steps into empty spaces, and flashes to warn other road users.

SEAMETAL LED Car Door Lights illuminating the ground in various colors

Image: SEAMETAL LED Car Door Lights in action, displaying different color options.

3. Specifications

FeatureDetail
Model NameD40792
BrandSEAMETAL
Item TypeCar Door Lights
UseFor Car door Lighting, Warning, Decoration
Wattage5W
Voltage5V (USB rechargeable)
Vehicle CompatibilityUniversal
OriginMainland China
ChemicalsNone (Hign-concerned Chemical)
Package Dimensions (L x W x H)12 cm x 6 cm x 2 cm
Package Weight0.054 kg

4. Package Contents

The package typically includes the following items. Please check your package upon receipt:

  • SEAMETAL LED Car Door Opening Warning Atmosphere Light(s) (1 or 2 pieces, depending on your order)
  • USB Charging Cable(s)
  • Adhesive Iron Sheet(s) (for non-ferrous surfaces)
  • Infrared Sensing Sticker(s)
Contents of the SEAMETAL LED Car Door Light package

Image: Example of package contents, including lights, cables, and stickers.

5. Safety Information

  • Do not expose the product to extreme temperatures or direct sunlight for prolonged periods.
  • Keep the product away from water and moisture to prevent damage.
  • Do not attempt to disassemble or modify the product, as this will void the warranty and may cause damage or injury.
  • Ensure the product is securely attached to prevent it from falling off during vehicle movement.
  • Use only the provided USB cable for charging.

6. Setup and Installation

Follow these steps for proper installation:

  1. Charge the Device: Before first use, fully charge the LED light using the provided USB cable. The charging port is typically located on the side of the unit.
  2. Prepare the Light: Tear off the protective film from the light's surface.
  3. Identify Mounting Location: Choose a flat, clean surface on the inside of your car door where the light can be easily seen when the door is open and will not obstruct door closure. Ensure there is approximately 1-2cm remaining distance from the door switch.
  4. Magnetic Attachment:
    • For Iron Surfaces: If your car door's inner surface is made of iron, the light's built-in strong magnet may adhere directly.
    • For Non-Ferrous Surfaces: If the surface is not magnetic, use the provided adhesive iron sheet. Peel off the backing from the adhesive iron sheet and firmly stick it to the chosen location on the car door. Then, the LED light will magnetically attach to this iron sheet.
    Diagram showing magnetic installation methods for the car door light

    Image: Installation diagram illustrating direct magnetic attachment and use of adhesive iron sheet.

    Compact car door light installed, showing minimal clearance

    Image: The compact light installed, demonstrating it does not affect door operation.

  5. Infrared Sensing Sticker Placement: Align the infrared sensing sticker with the designated sensing area on the light. This sticker helps the light detect when the door is closed and should turn off.
  6. Testing: Test the lamp in a dark place. The bright areas should automatically turn off during testing if the infrared sensor is properly aligned and not covered. When testing, do not cover the sensing area.
User manual page showing setup steps for the car door light

Image: Visual guide for setup, including protective film removal, power button, and sensor alignment.

7. Operating Instructions

  • Power ON/OFF: Click the power/switch mode button to turn the light ON. Long press the button to shut down the device.
  • Mode Switching: Short presses of the power/switch mode button will cycle through different lighting modes: Colorful, Breathing, Monochrome, and Flash.
  • Automatic Activation: The light is equipped with a light sensor and will only activate in dark conditions when the car door is opened. This conserves battery life during daylight hours.
  • Door Opening Warning: When the car door is opened, the light will flash to warn other road users, enhancing safety.
  • Ground Illumination: The light also illuminates the ground directly below the car door, helping you avoid stepping into puddles or uneven surfaces.
Car door light with control button and various lighting modes

Image: The light unit showing the control button for power and mode switching.

Car door light flashing as a warning when door is open

Image: The light in flash mode, serving as a warning when the car door is open.

Car door light illuminating the ground for safety

Image: The light illuminating the ground, preventing accidental steps.

8. Maintenance

  • Charging: When the light dims or stops functioning, it's time to recharge. The magnetic attachment allows for easy removal for charging. Connect the light to a 5V USB power source using the provided cable.
  • Cleaning: Wipe the surface of the light with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Storage: If storing the lights for an extended period, ensure they are fully charged and stored in a cool, dry place.
Hand removing car door light from magnetic mount for charging

Image: The magnetic adsorption feature allows for easy removal for charging.

9. Troubleshooting

  • Light does not turn on:
    • Check if the light is charged.
    • Ensure it is dark enough for the light sensor to activate. The light will not turn on in bright conditions.
    • Verify the power button has been pressed correctly (short press for ON, long press for OFF).
  • Light turns on but does not turn off when door is closed:
    • Check the alignment of the infrared sensing sticker. It must be correctly positioned to detect the door closure.
    • Ensure the sensing area on the light is not obstructed.
  • Light falls off:
    • If using the adhesive iron sheet, ensure the surface was clean and dry before application.
    • For direct magnetic attachment, ensure the car door surface is indeed ferrous and clean.
  • Cannot maintain a single color:
    • The light cycles through modes (Colorful, Breathing, Monochrome, Flash) with short presses. To select a specific monochrome color, cycle through until the desired color is displayed. The device should retain the last selected mode.

10. User Tips

  • Daylight Sensor: Remember that the lights are designed to only activate in dark conditions to conserve battery. If you test them during the day, they may not turn on.
  • Installation Flexibility: For some car models with metal door surfaces, the strong magnet in the light may adhere directly without needing the adhesive iron sheets. Test this before applying the adhesive.
  • Infrared Sensing Stickers: These stickers are crucial for the light to detect door closure and prevent unnecessary flashing during the day. Handle them carefully during installation, especially in windy conditions, to ensure proper placement.
  • White Color Tone: Note that the 'white' color option may not be a pure white but can have a slight tint.
  • Regular Charging: As these are rechargeable, establish a routine to charge them periodically to ensure they are always ready when needed.

11. Warranty and Support

For any questions, concerns, or technical support regarding your SEAMETAL LED Car Door Opening Warning Atmosphere Light, please contact the seller or manufacturer directly. Please retain your proof of purchase for warranty claims.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.