E-ACE A45P

Contents

E-ACE A45P 4K WiFi GPS Car DVR User Manual

Model: A45P | Brand: E-ACE

1. Introduction

Thank you for purchasing the E-ACE A45P Car Dash Cam. This dash cam features high-performance chips for high-definition videos and seamless dynamic images. It supports a maximum of 2K (2560×1440) true HD camera resolution and has passed strict European CE and American FCC certifications. Please read this manual carefully before use and store it properly for future reference. We hope this product meets your needs and serves you for a long time!

2. Safety Precautions

  • Since the device may shift during transportation, it is equipped with a protective film to prevent damage. Upon first use, please record two videos to test the camera's quality.
  • The built-in battery capacity is small. If you intend to use the vehicle monitoring function for extended periods or while parked, ensure the product maintains power and prioritize safety. It is recommended to use the car charger for continuous power during operation.
  • For parking monitoring or motion detection functions, a buck line (sold separately) is required to connect the dash cam directly to the car battery.
  • Clean the product with a soft cloth to remove dust. Avoid using chemical detergents, gasoline, alcohol, or anti-static sprays.
  • This product is suitable for small cars. If connecting to a larger vehicle, consider the length of the car charger line.

3. Parts Overview

Familiarize yourself with the components of your E-ACE A45P Car DVR:

Diagram of E-ACE A45P Car DVR mirror with numbered parts
Figure 3.1: E-ACE A45P Car DVR Main Unit Diagram
  1. TF Card Slot
  2. Rear Camera Interface
  3. USB Interface
  4. Reset Button
  5. Power Button

4. Installation Guide

Follow these steps to properly install your E-ACE A45P Car DVR:

  1. Turn off the vehicle engine.
  2. Insert a Class 10 Micro SD Card (maximum 64GB recommended) into the TF Card Slot.
  3. Attach the dash cam securely to the rearview mirror of your car.
  4. Connect the car charger to the Dash Cam using the charging cable, then plug the other end of the car charger into the cigarette lighter socket.
  5. Install the rear camera: Connect it to the AV IN port on the main unit. The red wire of the extension cable should be connected to the "+" of the backup light.
  6. Adjust the camera lens to ensure it is parallel to the ground.
  7. Start the engine and verify the installation.

Note:

  • The indicator lights will illuminate when the dash cam is correctly installed.
  • The recording indicator will flash when the dash cam enters recording mode.
  • Check if the image on the display is normal. If the display is inverted, ensure the camera is installed correctly or contact support.
E-ACE A45P Car DVR package contents including car charger, fixed bandage, instructions, and card reader.
Figure 4.1: Included Accessories and Main Unit
Diagram showing hardwire kit, 1080P rearview camera, and 6 meters rearview camera cable.
Figure 4.2: Rear Camera and Hardwire Kit Components

5. Operation

5.1. Power Button Functions

  • As a Power Switch:
    • Start up: Press and hold the Power Button for 2 seconds to turn on the power. The machine will start working automatically.
    • Shut down: Press and hold the Power Button for 2 seconds to automatically save the video file and user settings, then the machine will shut down.
  • Turn On/Off the Display:
    • Press the Power Button while powered on to turn off the display. Press again to turn on the display.

5.2. Main Functions

  • Loop Record: (1 MIN/3 MIN/5 MIN/other)

    The dash cam automatically records video to the Micro SD card when the car engine starts and saves the video when the engine is off. If the memory card is full, the device will automatically overwrite older video. The loop recording period can be set to 1, 3, or 5 minutes, or other options.

  • Time Lapse: (OFF/1S/2S/3S/other)

    Adjust the time lapse setting. The dash cam records continuously. To efficiently use TF card storage, you can set the time lapse in modes like OFF/1S/2S/3S. When the dash cam detects a stationary state, the video display speed increases during playback. When in motion, playback speed remains normal.

  • Record Audio: (OFF/ON)

    Turn on/off audio recording. It is recommended to keep this function on.

  • G-Sensor: (OFF/LOW/MIDDLE/HIGH)

    The built-in G-sensor automatically detects sudden shakes/collisions and locks the footage to prevent overwriting, even during loop recording, ensuring accident scenes are preserved.

  • Parking Monitor: (OFF/LOW/MIDDLE/HIGH)

    When activated, the dash cam automatically turns on and starts recording if it detects vibration. It will capture frames for a time-lapse video for 20 seconds.

    Diagram illustrating 24H Parking Monitoring with time-lapse recording at 1FPS.
    Figure 5.1: 24H Parking Monitoring Feature
  • License: (OFF/ON) (Optional)

    Add your car license plate information to the video recording.

  • Stream Media: (OFF/ON)

    When "on," the rear camera is displayed full screen by default. When "off," the front camera is the default full-screen view.

  • Language: Multi-language support.
  • Time Setting:

    Use up and down controls to adjust the date and time. Note: Set the correct date and time before use to ensure accurate evidence in case of an accident.

  • Format SD:

    Format the TF card. Note: Always format the Micro SD card before initial use.

5.3. Button Functions

Icon Function
↕ Adjust the image
+- Adjust the brightness
● Video: Short touch to start recording, short touch again to stop recording
📷 Photo: Short touch to snap a picture
🎧 Audio Recording on-off
🔒 Lock: When recording, short touch to lock the file
📁 Files: Play back all recorded videos and photos
⚙ Settings
Image showing parking assist lines on the dash cam screen.
Figure 5.2: Extra Parking Guide Feature
Image demonstrating 5.8GHz WiFi connectivity for faster video download to a smartphone via the Viidure app.
Figure 5.3: Built-in 5.8GHz Wi-Fi for Video Playback

6. Specifications

Feature Specification
Sensor SONY/CMOS
Screen 10/12 inch LCD
Mic/Speaker Built-in
Photo Format JPG
Video Resolution (Front+Rear) 1920*1080 (1080P) + 1280*720 (720P)
1920*1080 (1080P) + 1920*1080 (1080P)
2560*1440 (2K) + 1920*1080 (1080P)
Video Format AVI/MP4
Audio Format AAC, MP3
Touch TP Support
Memory Card Micro SD Class 10 & Max 64GB
Shutter Electronic shutter
Car Inverter DC 5V/2.0A-3.5A
Working Temperature -10°C - 50°C
Relative Humidity 10% - 70%RH
Battery About 500-700mAh Li-ion Battery
Image highlighting 4K+1080P video, 5.8GHz WiFi, 11.26 inch touch screen, WDR, and Night Vision features.
Figure 6.1: Key Features of E-ACE A45P
Comparison image showing the wider viewing angle and larger display of the 11.26 inch mirror dash cam versus a common 3-inch dash cam.
Figure 6.2: 11.26" Smart Screen Advantage

7. Troubleshooting (Frequently Asked Questions)

7.1. Dash Cam Not Turning On

  • Plug in the car charger and try turning it on by pressing the On-Off key for about 3 seconds.
  • Charge the dash cam for about 5 minutes before turning it on, then manually restore factory settings.
  • Press the Reset button (using a pin) to restore factory settings.

7.2. Automatic Turn On/Off

  • The dash cam requires continuous power from the car charger for normal operation. The built-in battery is small and primarily for parking monitor mode.
  • Ensure you are using a Class 10 or above Micro SD Card and format it before use.

7.3. Cannot Read SD Card

  • Use a genuine Class 10 or above Micro SD Card.
  • Format the SD Card on a computer before use, then insert it correctly (there will be slight resistance when inserted properly).

7.4. Video Function Not Working Normally

  • Format the Micro SD card within the dash cam before use.
  • Recommended cards: 16GB/32GB/64GB Micro SD card, Class 10 or above.

7.5. Product Malfunction After Extended Use

  • If the G-sensor is set too high, it may lead to too many locked files, preventing loop recording. Manually delete locked files.
  • Adjust G-sensor sensitivity to Medium or Low to avoid excessive file locking from road bumps.
  • Use motion detection only when not driving.

7.6. Rear Camera Not Working

  • Check if the rear camera is connected properly to the main unit.
  • Ensure the rear camera's wiring is tightly connected and there is no loose contact at the interface.

7.7. Rear Camera Image Upside Down

  • The rear camera is installed in the wrong direction. Adjust its installation to the correct orientation.

7.8. Screen Turns Black After About One Minute

  • The "Screen Dormant" function is likely enabled in settings. Turn off this function.

7.9. Cannot Set Date and Time Correctly

  • Ensure the device has sufficient power.
  • Access system settings, find the date and time option, and set it.
  • After setting, manually turn off the dash cam to save the settings.

7.10. Product Heats Up Automatically

  • This can occur if the product has been used for a long time.
  • High temperatures inside the car can also contribute to heating.

7.11. Incorrect Date/Time on Recordings

  • Set the date and time through the settings menu. Manually turn off the dash cam after setting to save.

7.12. Recorded Image Not Clear

  • Remove the protective films from both front and rear camera lenses before use.
  • Check if the windshield is clean.

7.13. Noisy Button Sound

  • Select "OFF" for the operation voice (OFF/ON) button in the system settings (Optional).

8. User Tips

Based on user experiences, here are some helpful tips for your E-ACE A45P Car DVR:

  • Easy Installation: Many users find the installation straightforward, especially when using the cigarette lighter socket for power.
  • Adjust Brightness: If the light from the rear camera is distracting, adjust the screen brightness to a comfortable level.
  • Stable Connection: Ensure all wires are securely connected to maintain consistent operation and avoid interruptions.
  • Clear Video: Users appreciate the clear video quality, both front and rear, which is crucial for recording incidents.
  • Intuitive Touchscreen: The touchscreen interface is generally easy to use, making navigation and settings adjustments simple.

9. Warranty and Support

9.1. Warranty Information

  • 30-Day Money-Back Guarantee:

    For 30 days from the date of purchase, you may return your undamaged product for any reason and receive a full refund.

  • 12-Month Warranty for Quality-Related Issues:

    For 12 months from the date of purchase, we will address all quality-related issues with a replacement or full refund.

Friendly Reminder:

Always read the user manual and use the product as instructed. When contacting support, have your product handy for efficient troubleshooting.

9.2. Limitations

Our returns and exchange service is limited to purchases made from Authorized stores. If you purchased through a different retailer, please contact them directly. Unauthorized reselling of our products is prohibited.

9.3. Contact Information

  • Website: http://e-ace.cn
  • Email: fireking@e-ace.cn
  • Tel: +86-18127083357
  • Address: Building A KangSheng FIREKING INTERNATIONAL CO., LTD, LongHua New District, Shenzhen, Guangdong, 518000, China.

For additional guidance, you can refer to the official user manual PDF: View User Manual (PDF)


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.