AVATTO ZDMS16

Contents

AVATTO Tuya ZigBee Smart Dimmer Switch Module

Model: ZDMS16

User Instruction Manual

1. Introduction

The AVATTO Tuya ZigBee Smart Dimmer Switch Module (Model ZDMS16) is designed to transform your traditional light switches into smart, dimmable controls. This module integrates with your Tuya ZigBee Hub, allowing for remote control via the Tuya Smart App, voice control through Amazon Alexa and Google Home, and stepless dimming from 0% to 100% brightness. It supports both 1-gang and 2-gang configurations and can be used in 2-way control setups.

Zigbee Smart Light Switch Module system overview showing WiFi router, voice control, app control, and the 1CH dimmer module.

Figure 1: System Overview - Smart Control via App and Voice

Stepless Dimming demonstration with a smartphone app controlling a lamp's brightness.

Figure 2: Stepless Dimming Functionality

2. Safety Information

WARNINGS:

  • Installation must be carried out by a qualified electrician in accordance with local regulations.
  • Keep the device out of reach of children.
  • Keep the device away from water, damp, or hot environments.
  • Install the device away from strong signal sources such as microwave ovens that may cause signal interruption, leading to abnormal operation.
  • Obstruction by concrete walls or metallic materials may reduce the effective operation range of the device and should be avoided.
  • DO NOT attempt to disassemble, repair, or modify the device.

3. Specifications

Feature Specification
Product Type Zigbee Dimmer Module
Voltage AC100-240V 50/60Hz
Operation Frequency 2.405GHz-2.480GHz (IEEE 802.11b/g/n)
Operation Temperature -10°C to +40°C
Protocol Zigbee 3.0
Operation Range <100m
Dimensions (WxDxH) 39x39x19.4 mm
IP Rating IP20
Max. Load (1-Gang) AC230V 150W / AC120V 80W
Max. Load (2-Gang) AC230V 2x100W / AC120V 2x60W
Certificates CE RoHS
Product dimensions and technical specifications table.

Figure 3: Product Size and Specifications

4. Installation

The AVATTO ZigBee Dimmer Module is designed for easy installation and is compatible with most standard installation boxes.

Easy installation of the dimmer module into a standard wall switch box.

Figure 4: Easy Installation into a Wall Box

Wiring Instructions and Diagrams

  1. Turn off the power supply before carrying out any electrical installation work.
  2. Connect wires according to the appropriate wiring diagram below for your module type (1-gang or 2-gang) and switch configuration (double switch or without switch).
  3. Insert the module into the junction box.
  4. Turn on the power supply and follow the switch module configuration instructions (see Section 6: App Setup).

Notes:

  • Take your smartphone close to the switch module when you're configuring.
  • Ensure you have a minimum of 50% Wi-Fi signal during configuration.
Detailed wiring diagrams for 1-channel and 2-channel Zigbee dimmer modules with and without traditional switches, along with app setup instructions.

Figure 5: Wiring Diagrams for 1CH and 2CH Modules (Double Switch & Without Switch)

5. Manual Override

The dimmer module terminal reserves access for manual override functions using a connected push-switch:

  • Short Push (<1s): Toggles permanent on/off function.
  • Long Push (>1s): Adjusts the brightness level.

Notes:

  • Both adjustments made via the App and the push switch can overwrite each other. The last adjustment made will remain in memory.
  • App control is synchronized with the manual switch.
  • The "S" terminals (S1, S2) may be left unconnected if no manual control is required.

6. App Setup and Pairing

To control your AVATTO ZigBee Dimmer Module via smartphone, you need the Tuya Smart App and a Tuya ZigBee Gateway.

System Requirements:

  • WiFi Router
  • Tuya ZigBee Gateway
  • Smartphone (iPhone, iPad with iOS 7.0 or higher; Android 4.0 or higher)

Pairing Steps:

  1. Download App: Scan the QR code on the manual (Figure 5) or search for "Tuya Smart" or "Smart Life" in your device's app store.
  2. Register/Log In: Log in or register your account using your mobile number or email address.
  3. Add ZigBee Gateway: Open the control panel of your ZigBee gateway in the Tuya Smart App. Ensure the gateway is already added and installed to your WiFi network.
  4. Reset Device: After wiring the switch module, press the reset key on the module for approximately 10 seconds, OR press and hold the connected traditional dimmer switch for 10 seconds or more until the connected lamp flashes quickly for pairing. This indicates the module has entered configuration mode.
  5. Add Sub-device: In the Tuya Smart App, click "+" (Add sub-device) within your ZigBee Gateway's interface. Select the appropriate product gateway and follow the on-screen instructions for pairing.
  6. Connecting: The connection process may take 10-120 seconds, depending on your network conditions.
  7. Control: Once successfully connected, you can control the dimmer module via your mobile phone.

7. Operating Instructions

App Control:

  • Open the Tuya Smart App and select your dimmer module.
  • Use the app interface to turn the light on/off and adjust brightness from 0% to 100% with stepless dimming.

Voice Control:

  • Once integrated with Amazon Alexa or Google Home via your Tuya ZigBee Hub, you can use voice commands to control your lights.
  • Example commands: "Alexa, turn on the living room light," "Hey Google, dim the bedroom light to 50%."

Manual Control:

  • Use the connected traditional push-switch for basic on/off and brightness adjustments as described in Section 5.

8. Maintenance

  • Keep the device clean and dry.
  • Avoid exposing the module to extreme temperatures or humidity.
  • Do not use harsh chemicals or abrasive cleaners on the device.

9. Troubleshooting (FAQ)

Q1: What should I do if I can't configure the dimmer module?
  • Check whether the device is powered on.
  • Make sure the Zigbee gateway is available and properly connected to your WiFi network.
  • Ensure you have good internet conditions.
  • Verify that the password entered in the App is correct.
  • Make sure the wiring is correct according to the diagrams in Section 4.
Q2: What type of devices can be connected to this Zigbee dimmer module?
Triac LED lights, incandescent lamps, or halogen lamps.
Q3: What happens if the WiFi goes off?
You can still control the light connected to the dimmer module with your traditional switch. Once WiFi is active again, the device connected to the module will automatically reconnect to your WiFi network.
Q4: What should I do if I change the WiFi network or change the password?
You will need to re-connect your Zigbee dimmer module to the new Wi-Fi network by following the App setup instructions (Section 6).
Q5: How do I reset the device?
Turn off the traditional button switch (the one connected to the Zigbee dimmer module). Then press and hold it for 10 seconds or more until the lamp connected to the module flashes quickly for pairing.

10. User Tips

  • This module has been reported to work well with Zigbee2MQTT (z2m) in Home Assistant for advanced users.
  • Ensure all modules are tested after installation to confirm proper functionality.

11. Warranty and Support

This product comes with a 2-year warranty.

For further detailed instructions and diagrams, you may refer to the official user manual PDF: View User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.