1. Product Overview
Kllisre Desktop DDR4 Memory modules are designed for high-performance computing, offering excellent speed and reliability for gaming, content creation, and everyday computing tasks. These modules feature sleek heat spreaders for improved thermal performance and stability.
Close-up view of a Kllisre DDR4 RAM module, showcasing its heat dissipation design.
Kllisre DDR4 RAM module, designed for strong performance in demanding applications like gaming.
2. Specifications
| Specification | Details |
|---|---|
| Memory Type | DDR4 Desktop Memory (Unbuffered) |
| Available Capacities | 16GB (Single Module) |
| Available Frequencies | 3200MHz, 3600MHz |
| Voltage | 1.35V (as per product properties, OCR states 1.2V, but 1.35V is typical for higher speeds) |
| Pin Configuration | 288-pin |
| Error Correction | Non-ECC |
| Registered | Unbuffered |
| CAS Latency | CL21 (depending on frequency) |
| Form Factor | DIMM (Dual In-line Memory Module) |
| Heat Spreader | Yes, aluminum heat spreader |
Dimensions of the Kllisre DDR4 RAM module, showing a height of 42mm.
For a detailed overview of memory specifications, you may also refer to the official user manual (PDF).
3. Compatible Components
Recommended Motherboards
Kllisre Desktop DDR4 Memory is compatible with a wide range of desktop motherboards, specifically those with DDR4 slots:
- Intel 600, 500, and 400 series chipsets (e.g., Z690, B660, H610, Z590, B560)
- AMD 500 and 400 series chipsets (e.g., X570, B550, X470, B450)
- Older chipsets that support DDR4 memory
Recommended Processors
This memory works with both Intel and AMD platforms:
- Intel Core i3, i5, i7, i9 processors (10th, 11th, 12th, 13th Gen)
- AMD Ryzen 3, 5, 7, 9 processors (3000, 4000, 5000 series)
Memory Configuration
For optimal performance:
- Install memory in pairs for dual-channel operation. Consult your motherboard manual for correct slot population.
- For best results, use identical memory modules with the same capacity and frequency.
4. Installation Guide
Warning: Always handle memory modules by the edges. Avoid touching the gold contacts or components on the circuit board. Static electricity can damage the memory, so use an anti-static wrist strap when handling components.
Kllisre DDR4 RAM modules as received in their protective blister packaging.
4.1. Power Down the System
Shut down the computer completely and disconnect all power cables from the power supply.
4.2. Open the Computer Case
Remove the side panel of your computer case to access the motherboard.
4.3. Locate Memory Slots
Identify the memory slots on your motherboard. Consult your motherboard manual for optimal slot population order (usually slots 2 and 4 for dual channel).
4.4. Release Retention Clips
Open the retention clips at both ends of the memory slot by pushing them outward.
4.5. Align the Memory Module
Align the notch in the memory module with the key in the memory slot to ensure proper orientation. Do not force the module into the slot.
4.6. Install the Memory
Firmly press down on the memory module until the retention clips snap into place automatically. Ensure both clips are fully engaged.
4.7. Repeat for Additional Modules
If installing multiple modules, repeat the process for each module, following the motherboard's recommended population sequence.
4.8. Close the System
Replace the computer case panel, reconnect all cables, and power on the system.
Kllisre DDR4 RAM modules correctly installed in a desktop motherboard.
5. Operating and Configuration
Note: After installing new memory, enter the system BIOS/UEFI to verify that all memory is detected and enable XMP/D.O.C.P. to achieve the advertised speed. Higher frequency memory (3600MHz) may require a more recent CPU and motherboard to achieve full speed. Always check your motherboard's QVL (Qualified Vendor List) for compatibility.
Enabling XMP/D.O.C.P.
To achieve the advertised higher speeds (3200MHz or 3600MHz), you must enable the XMP (Extreme Memory Profile) for Intel systems or D.O.C.P. (Direct Overclock Profile) for AMD systems in the BIOS/UEFI settings.
- Enter BIOS/UEFI settings during boot (usually by pressing DEL or F2).
- Find memory settings (often under "Advanced" or "Overclocking" menu).
- Enable XMP (Intel) or D.O.C.P. (AMD).
- Select the appropriate profile for your memory speed.
- Save changes and exit BIOS.
- If the system becomes unstable, update the BIOS to the latest version.
- If problems persist, you may need to manually set speed and timings.
6. Maintenance
Kllisre DDR4 memory modules are designed for durability. To ensure longevity and optimal performance:
- Keep your computer's interior clean and free of dust to maintain efficient heat dissipation.
- Ensure proper airflow within your PC case to prevent overheating.
- Avoid physical impact or bending of the memory modules.
- When handling, always use proper anti-static precautions.
7. Troubleshooting
7.1. System Won't Boot After Installation
Possible causes: Improperly seated memory, incompatible memory, BIOS needs update.
Solutions: Reseat memory modules, clear CMOS, update motherboard BIOS to the latest version.
7.2. Only Partial Memory Detected
Possible causes: Improperly seated memory, incompatible memory population, faulty memory slot.
Solutions: Reseat memory modules, consult motherboard manual for proper population order, try modules in different slots.
7.3. Memory Not Running at Advertised Speed (3200/3600MHz)
Why this happens: By default, DDR4 memory runs at a conservative JEDEC standard speed (usually 2133MHz or 2400MHz). To achieve the advertised higher speeds, you must enable the XMP (Extreme Memory Profile) for Intel systems or D.O.C.P. (Direct Overclock Profile) for AMD systems in the BIOS.
Other reasons: Some older CPUs or motherboards may not support higher memory speeds. The memory controller in your CPU has limitations, and motherboard topology can affect maximum achievable speed.
Solutions: Refer to the "Enabling XMP/D.O.C.P." section above.
7.4. System Instability or Crashes
Possible causes: Incompatible memory timing settings, overheating, insufficient power.
Solutions: Load BIOS optimized defaults, ensure proper system cooling, verify power supply adequacy, test with one module at a time.
7.5. Blue Screen Errors
Possible causes: Memory compatibility issues, Processor incompatibility, incorrect timings.
Solutions: Test each module individually, run memory diagnostic tools (Windows Memory Diagnostic or MemTest86), adjust BIOS memory settings.
Note: If problems persist, test each memory module individually to identify potential faulty modules. Contact Kllisre support if you suspect a defective product.
8. User Tips
- Always ensure XMP/D.O.C.P. is enabled in your BIOS to run the RAM at its advertised speed.
- Kllisre RAM has been noted to work well with AMD Ryzen 3000 series CPUs, such as the Ryzen 5 3500X.
- While packaging may sometimes show minor cosmetic imperfections, the product itself is typically well-protected and functional.
- For specific CAS Latency (CL) values, refer to the product specifications or your motherboard's QVL, as it can vary with frequency.
9. Warranty Information
Kllisre Desktop DDR4 Memory modules are covered by a one-year warranty. The warranty covers defects in materials and workmanship under normal use. Proof of purchase is required for warranty service.
This warranty does not cover damage resulting from accident, misuse, abuse, improper installation, or unauthorized modifications.
Contact and Support
For warranty claims or technical support, please contact Kllisre support with your purchase details and a description of the issue. Refer to the official Kllisre website for contact information.
© 2023 Kllisre. All rights reserved. Kllisre is a registered trademark. Specifications are subject to change without notice.