GMAIPOP G900

Contents

GMAIPOP G900 4K WiFi Dual Dash Cam User Manual

Model: G900 4K+1080P

Introduction

Thank you for purchasing the GMAIPOP G900 4K WiFi Dual Dash Cam. This manual provides detailed instructions for installation, operation, and troubleshooting to ensure you get the best experience from your device. Please read this manual thoroughly before use.

For a complete and detailed guide, you may also refer to the official PDF user manual: View PDF User Manual.

Important Safety Information

SD Card Insertion

The SD card can only be inserted from one direction. Before inserting, please ensure the direction is correct as shown in the figure below. Push the card gently until it clicks into place.

Diagram showing correct SD card insertion direction into the dash cam.

Image: Correct SD card insertion into the dash cam.

Hardwired Kit for Advanced Features

Time Lapse video Mode and 24H Park Monitor will be triggered only when the Hardwired Kit is connected. If these features are important to you, ensure you use the hardwired kit.

Diagram of the hardwired kit components.

Image: Hardwired kit for Time Lapse and 24H Park Monitor features.

Battery & Charger

The dash cam's built-in battery (200mAh) is primarily for maintaining and saving settings. It must be connected to the car charger or USB for continuous power. If power is interrupted, the unit will shut down. Always use the original car charger provided to prevent faults or incompatibility.

Cautions for High Temperature

Do not leave this product in locations where the temperature may exceed 70°C (160°F) for extended periods. When using a sunshade, avoid placing the dash cam between the windshield and sunshade, as this can cause damage from heat buildup.

Box Contents

Verify that all items listed below are included in your package:

Item Description
DashCam G900 Dash Cam Main Device
Suction Bracket For mounting the dash cam
3M Sticky Mount Alternative mounting option
USB-C Car Charger Input: 12-24V, Output: 5V/2A. Use original GMAIPOP charger.
1080P External Camera Rear/Inside camera for dual recording
19.7ft connection cable Connects the external camera
Accessories Bag Includes Cable Hiding Clip, Electrostatic film, Install kit, Replacement adhesive, Wet&Dry Wipes
Manual Instruction manual (this document)
Image showing all components included in the dash cam package.

Image: All components of the GMAIPOP G900 Dash Cam package.

Product Overview

Dash Cam Layout

Diagram of the dash cam showing ports and buttons.

Image: Front and side view of the dash cam highlighting ports and buttons.

  • Rear Camera Port: Connects the external camera.
  • Mount Interface: Where the suction or sticky mount attaches.
  • Type-C Power Port: For connecting the car charger.
  • TF Card Slot: Insert your Micro SD card here.
  • Reset: Small button to reset the device.
  • MIC (microphone): Records audio.
  • Power: Power button.

Button Functions

Button Function (Short Press) Function (Long Press)
M/Lock Enter Menu / Lock current video file (during recording) Enter File Management (2-3s)
UP (Triangle) Switch front/rear camera display / Take a photo (during recording) N/A
DOWN (Inverted Triangle) Mute Audio Recording Turn On/Off WiFi
OK Start/Stop Recording / Play/Pause video (in playback) / Enter/Save settings N/A
POWER Turn on/off camera screen manually Turn on/off the camera manually

Indicator Lights

  • Charging Light (Red): On when charging, off when fully charged.
  • Recording Light (Blue): Flashes when recording, off when recording stops.

Setup

1. Insert SD Card

Insert the Micro SD card into the TF Card Slot. Ensure the correct orientation and push until it clicks. The dash cam supports up to 256GB external memory. A Class 10 memory card is required.

Diagram showing correct SD card insertion direction into the dash cam.

Image: Correct SD card insertion into the dash cam.

2. Install Front Camera

  1. Install Electrostatic Film: Clean the windshield glass thoroughly using the provided accessories. It is crucial for the glass to be clean to ensure the bracket adheres properly. Peel off the cover marked "1" (red) from the electrostatic film and apply it to the desired location on the windshield. Then, peel off the cover marked "2" (green).
  2. Install Bracket: Choose either the Suction Bracket or the 3M Sticky Mount.
    • Suction Bracket: Insert the suction bracket into the dash cam's mount interface. Attach the suction cup to the electrostatic film. Press and hold it tightly against the windshield to remove air, then turn the LOCKING Knob clockwise to secure it.
    • 3M Sticky Bracket: Insert the sticky bracket into the dash cam's mount interface. Remove the sticky cover and press the bracket firmly onto the electrostatic film.
  3. Adjust Recording Angle: Loosen the screw on the mount to adjust the angle. Rotate the dash cam 360° to set the recording direction. Ensure the suction bracket is locked tightly; otherwise, it may drop during recording.
  4. Image showing the dash cam mounted with adjustable angle.

    Image: Dash cam mounted with adjustable angle.

  5. Connect Car Charger & Wire Cable: Connect the car charger to the camera's USB port. Route the cable along the top panel, down the side panel (be careful around airbags), along the door's sealing tape, and connect to the cigarette lighter.
  6. Diagram illustrating two methods for routing the dash cam power cable in a car.

    Image: Wiring diagrams for front camera installation (Method A and B).

    Important Note: If your vehicle has side curtain airbags, be extremely careful when running cables along windows. Do not run cables past airbags to prevent interference with deployment.

3. Install External Camera (Optional)

The external 1080P camera can be installed in the rear windshield glass to view the back of the car. Use the longer 19.7ft connection cable.

  1. Choose Position & Clean: Select a suitable position on the rear windshield glass and clean it thoroughly.
  2. Install Electrostatic Film: Apply the electrostatic film to the cleaned position.
  3. Attach Rear Camera: Remove the sticky cover from the external camera and attach it tightly to the electrostatic film.
  4. Connect & Wire Cable: Insert the rear camera's cable into the dash cam body. Route the cable similarly to the front camera, hiding it along the car's interior panels and sealing tape, leading it to the dash cam. Ensure to align the two arrows on the cable connectors when connecting.
  5. Important Note: If the external image appears flipped or upside down, adjust the 'Flipping RearCam Image' setting in the menu or re-install the external camera.

Operation

1. Power On (Start Recording)

The dash cam will automatically start recording when the car is powered on. The Recording icon (red dot) will flash. If it doesn't start automatically, check the car charger connection and ensure the SD card is not full (format if necessary).

2. Power Off (Stop Recording)

The dash cam will automatically stop recording and turn off when the car is turned off. You can also manually stop recording by short-pressing the OK button.

3. Settings

To enter the settings menu, long-press the M/Lock button. Use the UP and DOWN buttons to navigate, and OK to confirm. Short-press M/Lock to exit the menu.

Key Settings:

  • Resolution: Choose between 4K+1080P, 2K+1080P, or 1080P+1080P. Higher resolutions consume more storage.
  • Loop Recording: Set recording segments (1, 3, or 5 minutes).
  • Language: Select your preferred OSD language (e.g., English, Spanish, French, German, Italian, Japanese, Korean, Russian, Chinese).
  • G-Sensor: Adjust sensitivity (Low, Medium, High) or turn off.
  • Parking Monitor: Turn on/off.
  • Time-Lapse Recording: Turn on/off (requires hardwired kit).
  • WiFi Setting: Turn on to connect to the app.
  • Flipping RearCam Image: Adjust if the external camera image is inverted.
  • Format: Format the SD card.

4. WiFi Connect & Free App

The dash cam features WiFi connectivity for easy access via a smartphone app. Download the "Viidure" app from Google Play or Apple App Store.

Screenshot of the Viidure app interface on a smartphone.

Image: WiFi Connect & Free App interface.

  1. Turn on WiFi: Long-press the DOWN button on the dash cam, or navigate to "WiFi Setting" in the menu and turn it on.
  2. Connect to Phone: On your smartphone, go to WLAN settings and search for the dash cam's WiFi network (e.g., "G900-******"). The default password is 12345678.
  3. Operate App: Open the "Viidure" app. You can view live footage, download videos, and adjust camera settings.

Important Note: The WiFi connection is for app control and file transfer only; it cannot be used for web browsing. When the app is connected, you cannot operate the dash cam using its physical buttons.

5. Playback Recorded Videos

On Dash Cam:

Long-press the UP button to enter file management. Use UP and DOWN to navigate through video files, and OK to play/pause. Short-press M/Lock to exit.

On Mobile Phone (via App):

Connect your phone to the dash cam's WiFi and open the "Viidure" app. Navigate to the camera file section. You must download the video files to your phone's album before you can play them back.

Important Functions

G-Sensor

The G-Sensor is a 3-axis impact gravitational sensor designed to detect physical and gravitational forces. When a significant shock or crash is detected, the current video file will be locked and protected from being overwritten by the loop recording function.

Tips for G-Sensor:

  • If G-sensor is on, check and format the SD card every 7 days to prevent it from filling up with locked files.
  • A "LOW" sensitivity setting is usually sufficient for daily use.
  • Setting sensitivity to "Middle" or "High" can easily fill the SD card with unnecessary locked files.

Loop Recording

Loop Recording allows the camera to continuously record. When the memory card is full, it automatically overwrites the oldest unlocked video files. This feature splits video files into appropriate lengths based on your selection (1, 3, or 5 minutes).

Time-Lapse Video

Time-lapse video mode captures specific images per second at a much lower rate. When the car engine is started, the dash cam records normal videos. When the engine is off, the camera stops continuous video recording and enters 1fps time-lapse recording mode automatically.

Important Note: Time-Lapse recording is triggered only by the Hardwire Kit. If only the car charger is used, time-lapse video will NOT be triggered. If time-lapse video is necessary, ensure you have the hardwire kit.

Maintenance

SD Card Formatting

Regularly format your SD card, especially if the G-sensor is enabled, to prevent it from becoming full with locked files. A full SD card can prevent new recordings and cause the dash cam to turn off unexpectedly. You can format the SD card via the dash cam's settings menu.

Troubleshooting (FAQ)

Why can't the memory card be read or shows "SD card error"?

  • Solution 1: Format the SD card manually through the dash cam settings.
  • Solution 2: Reset the dash cam by pressing the reset button.
  • If problems persist, contact customer support for a replacement SD card.

Why is the SD card full?

Many locked files (triggered by G-sensor events) cannot be overwritten by loop recording. Regularly format the SD card to delete these locked files.

Why does the suction bracket keep dropping?

  1. Ensure the windshield is clean and the electrostatic film is properly applied.
  2. Make sure the suction cup is rotated to the locked position tightly.
  3. The suction bracket's soft silicone may harden over time. If it drops frequently, contact support for a free replacement.

How to switch the display window between front and rear cam?

Short-press the UP button to switch the display between the front and rear camera views.

Why does the dash cam keep turning on and off?

  • Check the car charger connection; a loose connection or faulty cigarette lighter can interrupt power.
  • If the Parking Monitor is on, it might auto-start due to detecting shakes.
  • Format the SD card. If it's full of locked videos, loop recording cannot overwrite them, causing power issues.
  • If the problem is not solved, please contact customer support.

Why does Time-lapse video need to work with a Hardwire Kit?

Time-lapse video requires a constant power supply from the car battery, which the hardwire kit provides by connecting directly to the battery. The standard car charger does not provide continuous power when the car is off.

Specifications

Feature Specification
Brand NameGMAIPOP
Item TypeCar DVR
Assembly ModePortable Recorder
Imaging SensorSony IMX335
Number Of Lenses2
Camera Resolution3840x2160
Pixels500Mega
Maximum Video Frame Rate60 fps
Video CodeH.264
Video FormatAVI, MP4
View angle170°
ApertureF2.0
Rear CameraYes
Built-in ScreenYes
Display Size3"-5"
Display TypeIPS
Touch ScreenNo
Screen Ratio16:9
Max External Memory256G
Memory Card Required Reading SpeedClass 10
Power SourceCorded Electric
Cable Length6m
BatteryBuilt-in
Working Temperature-20℃ - 70℃
OSD LanguageChinese (Simplified), Chinese (Traditional), English, French, German, Italian, Japanese, Korean, Russian, Spanish
Special FeaturesG-Sensor, Motion Detection, SD/MMC Card, Anti Vibration, Real Time Surveillance, Automatic White Balance, Wide Dynamic Range, WiFi Function, Parking Monitor, NightShot Function, Loop-Cycle Recording Feature, Audio Recorded
InterfaceAV-In, SD/MMC, Wi-Fi, Micro SD/TF
CertificationCE, FCC

User Tips

  • After installation, always check the recorded video quality to ensure both front and rear cameras are functioning optimally and capturing clear footage.
  • While the dash cam supports multiple OSD languages, if your preferred language is not listed, English is a comprehensive default.
  • For optimal performance and to avoid SD card issues, consider formatting your SD card once a week, especially if you frequently encounter G-sensor events.

Warranty & Support

For any issues, technical support, or warranty claims, please contact the seller or manufacturer directly. Refer to the full PDF user manual for detailed warranty information and contact methods.

This product is certified with CE and FCC standards.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.