Introduction
Thank you for choosing the AVATTO Smart Wall Socket. This device integrates traditional power outlets with smart home technology, offering individual control, USB and Type-C charging ports, and compatibility with smart assistants. This manual provides essential information for safe installation, operation, and maintenance of your smart socket.
Image: AVATTO Smart Wall Socket available in white and black finishes.
Package Contents
- AVATTO Smart Wall Socket (WOT12 WiFi or ZWOT12 Zigbee version)
- User Manual (this document)
- Mounting Screws (if applicable)
Safety Information
- Ensure power is OFF at the circuit breaker before installation to prevent electric shock.
- Installation should be performed by a qualified electrician or in accordance with local electrical codes.
- Do not exceed the maximum load ratings of the socket or USB ports.
- Do not use in wet or damp environments.
- Keep out of reach of children.
- Inspect the device for any damage before installation.
Setup
1. Wiring Diagram
Before wiring, ensure the main power supply is turned off at the circuit breaker. Connect the wires as shown in the diagram below:
Image: Wiring diagram for the smart wall socket. Connect Neutral (N), Live (L), and Earth (E) wires to the corresponding terminals.
- L (Live): Connect the live wire.
- N (Neutral): Connect the neutral wire.
- E (Earth): Connect the ground wire.
After wiring, carefully secure the socket into the wall box and restore power.
2. App Installation
Your AVATTO Smart Wall Socket works with the "AVATTO" app or "Smart Life" app. For optimal customization, the AVATTO app is recommended.
- Scan the QR code below with your smartphone camera or search for "AVATTO" or "Smart Life" in your device's app store (Google Play Store for Android, Apple App Store for iOS).
- Download and install the app.
- Register or log in to your account.
Image: QR codes for downloading the AVATTO and Smart Life applications.
3. Device Pairing
Ensure your mobile phone is connected to a 2.4GHz Wi-Fi network and Bluetooth is enabled.
For WOT12 (WiFi Version):
- Long press any touch button on the smart socket for more than 3 seconds until the indicator light begins to flash quickly. This indicates the device is in configuration (pairing) mode.
- Open the "AVATTO" or "Smart Life" app.
- Tap the "+" icon (Add Device or Add Sub-device).
- The app should automatically discover the device or prompt you to select it. Follow the on-screen instructions to complete the pairing process.
For ZWOT12 (Zigbee Version):
A Zigbee gateway (hub) is required for the Zigbee version.
- Ensure your Zigbee gateway is already set up and connected to the app.
- Long press any touch button on the smart socket for more than 3 seconds until the indicator light begins to flash quickly. This indicates the device is in configuration (pairing) mode.
- Open the "AVATTO" or "Smart Life" app.
- Tap the "+" icon (Add Device or Add Sub-device).
- Select your Zigbee gateway, then choose to add a new sub-device.
- The app should discover the smart socket. Follow the on-screen instructions to complete the pairing process.
Operating Instructions
1. Individual Control
Each power outlet, USB port, and Type-C port can be controlled independently via the app. You can turn them on or off individually.
Image: App interface showing dual individual control for each socket, USB, and Type-C port.
2. USB and Type-C Charging
The integrated USB and Type-C ports provide convenient fast charging for your mobile devices. The maximum output for these ports is 5V 2.4A.
Image: Illustration of USB and Type-C ports providing fast charging for devices, with a max load of 5V 2.4A.
3. Restart Status Definition Function
You can define the power-on state of the socket after a power outage. In the app settings, you can choose for the socket to be OFF, ON, or remember its last status when power is restored.
Image: App setting for 'Restart status' allowing users to define the socket's state after a power cycle.
4. APP Remote Control
Control your wall socket from anywhere, anytime, using the AVATTO or Smart Life app on your smartphone.
5. Linkage Function (Smart Automation)
Create custom smart automations and scenes within the app. For example, you can set a device connected to the socket to turn on or off based on time, weather, or the status of other smart devices.
Image: App interface demonstrating the creation of smart automations and scenes.
6. Voice Control
The smart socket is compatible with Amazon Alexa and Google Home. Once integrated, you can control the socket using voice commands. Refer to your smart assistant's app for integration instructions.
Maintenance
- Clean the socket with a dry, soft cloth. Do not use abrasive cleaners or liquids.
- Ensure the socket is free from dust and debris to maintain optimal performance.
- Do not attempt to disassemble or repair the device yourself. Contact support if issues arise.
Troubleshooting
- Device not pairing:
- Ensure your Wi-Fi network is 2.4GHz. 5GHz networks are not supported.
- Check if the indicator light is flashing quickly (pairing mode). If not, long-press a button for 3+ seconds.
- Ensure your phone's Bluetooth is on.
- Move the device closer to your Wi-Fi router during pairing.
- Restart your router and try again.
- No response from app:
- Check your internet connection.
- Ensure the device is powered on.
- Restart the app.
- Voice control not working:
- Ensure the smart socket is correctly linked to your Amazon Alexa or Google Home account.
- Check your voice commands for accuracy.
Specifications
| Feature | Specification |
|---|---|
| Model Number | WOT12 (WiFi) / ZWOT12 (Zigbee) |
| Network Connections | WiFi 2.4GHz IEEE 802.11 b/g/n (WOT12), Zigbee 3.0 (ZWOT12) |
| Input Voltage | AC 100V-240V, 50/60Hz |
| Rated Current (Socket) | 16A |
| Max. Power (Socket) | 3500W / 3680W |
| USB & Type-C Output | 5V 2.4A (Max) |
| Dimensions | 72mm (W) x 120mm (H) x 45mm (D) |
| Standby Power Consumption | <0.5W |
| APP Support | Smart Life / Tuya Smart (iOS/Android) |
| Voice Control | Amazon Alexa, Google Home |
| Flammability Rating | V0 per UL94 |
| Materials | Tempered Glass + PC |
| Working Life | 100,000 Times |
| Grounding | Standard Grounding |
Image: Detailed dimensions and specifications of the AVATTO Smart Wall Socket.
User Tips
- Easy Installation: Users have found the installation process to be intuitive. Always remember to turn off power at the breaker first.
- Versatile Charging: The integrated USB Type-A and Type-C ports are highly appreciated for their convenience and good performance.
- Quality Build: The product is noted for its top-notch material quality and reasonable finish.
- App Control: Utilize the individual control features in the app for each socket and USB port to maximize convenience.
Frequently Asked Questions (FAQ)
- Q: Is the black version of the socket Zigbee?
- A: Both WiFi (WOT12) and Zigbee (ZWOT12) versions are available in black and white finishes. Please ensure you select the correct version when purchasing.
- Q: Is this socket 20 amperes?
- A: The maximum rated current for the socket outlets is 16A.
- Q: Is it compatible with Home Assistant?
- A: The socket works with Tuya Smart and Smart Life apps. These platforms often have integrations available for Home Assistant, but direct compatibility may require specific configurations or third-party add-ons.
- Q: Is the socket bivolt (110V/220V compatible)?
- A: Yes, the input voltage range is AC 100V-240V, making it compatible with various standard voltages.
- Q: Does it have power consumption control/monitoring?
- A: No, this model does not feature built-in energy consumption monitoring.
Warranty and Support
For warranty information, please refer to the terms and conditions provided by your retailer at the time of purchase. For technical support or further assistance, please contact AVATTO customer service through their official website or the contact information provided with your product.
A PDF version of the user manual may be available for download at: User Manual (PDF)