Introduction
Thank you for choosing VENDY Intelligent Boneless Windshield Wiper Blades. This manual provides essential information for the safe installation, operation, maintenance, and troubleshooting of your new wiper blades. Please read it carefully before installation and keep it for future reference.
Note: These wiper blades are only suitable for left-hand drive (LHD) vehicles.
Safety Warnings & Precautions
- Sharp Edges: Wiper blades may have sharp edges. Always wear protective gloves when installing or replacing them to prevent injury.
- Dry Operation: Do not operate wiper blades at high speed on dry glass surfaces. This can cause excessive friction, leading to premature wear of the wiper blade rubber and potential damage to the windshield.
- Wiper Arm Handling: Do not pull the wiper arm directly with your hands. This can bend or damage the wiper arm mechanism, leading to improper wiper function or breakage.
- Cleaning Agents: Do not wipe the rubber strip with corrosive cleaning agents (e.g., gasoline, alcohol, strong solvents) as they can degrade the rubber material.
- Surface Compatibility: Wiper blades are designed for glass surfaces only and are not suitable for use on non-glass surfaces.
Setup & Installation
Your VENDY wiper blades are designed for easy and quick installation, providing a perfect fit without the need for awkward adapters.
Installation Steps:
- Prepare Windshield: Ensure your windshield is clean and free of debris.
- Lift Wiper Arm: Gently lift the existing wiper arm away from the windshield until it locks into the upright position.
- Remove Old Blade: Carefully remove the old wiper blade from the wiper arm. This usually involves pressing a small tab or button and sliding the blade off.
- Align New Blade: Align the mounting clip of the new VENDY wiper blade with the hook or pin on the wiper arm.
- Secure Blade: Gently press the new wiper blade into place until you hear a click, indicating it is securely latched.
- Lower Wiper Arm: Carefully lower the wiper arm back onto the windshield.
- Test Operation: Test the new wiper blades with your vehicle's washer fluid to ensure proper function and a clear wipe.
Figure 1: Visual guide for wiper blade installation.
Video 1: Demonstration of wiper blade installation.
Wiper Arm Interface Compatibility:
Your VENDY wiper blades are designed to match the standard original car wiper interface. Refer to the image below for common interface types.
Figure 2: Examples of common wiper arm adaptation interfaces (A1, B5, B2, B1, B7, B11, E, C, F, H).
Operating Instructions
VENDY Intelligent Boneless Wiper Blades are designed to provide superior visibility and quiet operation.
- Clear Visibility: The specially blended rubber and double carbon steel bar ensure uniform pressure along the entire blade length, delivering a smooth, clean, and traceless wipe. This significantly improves visibility during rain, snow, or when cleaning the windshield.
- Silent Operation: The aerodynamic design and high-quality materials contribute to a truly silent operation, minimizing drag, noise, and wind lift.
- Ice and Snow Prevention: The boneless design prevents ice and snow build-up from the exposure of metal/plastic components, ensuring consistent performance in cold weather.
Figure 3: Comparison of windshield clarity with effective wipers versus vague visibility.
Figure 4: Illustration of silent operation (Product Operation ~20dB, quieter than normal conversation).
Maintenance
Cleaning:
To maintain optimal performance, regularly clean your wiper blades. Wipe the rubber strip with a soft cloth dampened with a neutral detergent. Avoid using gasoline, alcohol, or other harsh solvents, as these can damage the rubber.
Replacement Interval:
It is recommended to replace your wiper blades every 6-12 months, or immediately if you notice any of the following:
- Wiper blade skipping across the windshield.
- Abnormal noise during operation (squeaking, chattering).
- Streaking or smearing on the windshield after wiping.
Ice Formation:
If ice forms on the wiper blades after use, gently remove the ice layer before operating the wipers to prevent damage to the rubber or windshield.
Storage:
When not in use for extended periods, store the vehicle in a cool, dry place, away from direct sunlight and high-temperature environments (above 70°C / 158°F). Covering the wiper blades with a protective sleeve can also help prolong their lifespan.
Troubleshooting
1. Wiper Skipping:
If your wiper blades are skipping across the windshield, consider the following:
- Rubber Strip Aging: The rubber material may have hardened or become brittle over time. Replacement is recommended.
- Oily Film on Glass: An oily residue on the windshield can cause skipping. Clean the windshield thoroughly with a glass cleaner.
2. Excessive Noise (Squeaking/Chattering):
If your wiper blades are making excessive noise, check for the following:
- Foreign Objects: Inspect the wiper blade and windshield for any small debris, dirt, or foreign objects that might be caught.
- Rubber Strip Deformation: The rubber strip might be twisted, bent, or damaged. Gently clean and inspect the rubber. If deformed, replacement is necessary.
- Wiper Arm Angle: In some cases, the angle of the wiper arm might be incorrect. This usually requires professional adjustment.
Specifications
| Feature | Description |
|---|---|
| Product Name | Upgraded Intelligent Boneless Wiper |
| Brand | VENDY |
| Compatibility | Honda Fit Jazz MK1 (2002-2008) - Left-Hand Drive (LHD) only |
| Blade Sizes | 20 inches (Driver Side) + 16 inches (Passenger Side) |
| Material | High-grade Natural Rubber, Memory Steel Sheet, Double Carbon Steel Bar |
| Placement | Front Windshield |
| Temperature Tolerance | +70°C to -40°C (+158°F to -40°F) |
| Lifespan | Up to 1 Million Wipes |
| Special Features | Intelligent Boneless Design, Aerodynamic Profile, Silent Operation, Traceless Wipe, Anti-Aging Rubber |
| Colors Available | Black, Black-Green |
| Item Weight (approx.) | 0.35 kg |
| Item Dimensions (approx.) | Height: 1.8 cm, Width: 1.6 cm |
Figure 5: Detailed product parameters and wiper size chart.
User Tips
While no specific user reviews or Q&A were provided, general tips for wiper blade users include:
- Regularly check your wiper blades for any signs of wear, cracking, or hardening of the rubber.
- Keep your windshield clean. Dirt, grime, and road film can prematurely wear out wiper blades and reduce their effectiveness.
- In winter, lift your wiper arms off the windshield when parking to prevent them from freezing to the glass.
Warranty & Support
For warranty information, technical support, or any product-related inquiries, please contact your original seller or the VENDY customer service department. Keep your purchase receipt as proof of purchase.