RACBOX Double Sides Marker Lights Warning Lamp For Truck Trailer Lorry Van

Contents

RACBOX Double Sides LED Marker Light Instruction Manual

Model: Double Sides Marker Lights Warning Lamp For Truck Trailer Lorry Van

1. Product Information

This product is an auxiliary accessory for automotive lighting, designed for normal replacement and upgrade of original vehicle lights. It complies with relevant national automotive lighting industry standards and has undergone strict quality testing.

RACBOX Double Sides LED Marker Lights in Red/Amber and Red/White, with examples of their illumination.
Figure 1: RACBOX Double Sides LED Marker Lights (Red/Amber and Red/White variants).

2. Safety & Warnings

Important Safety Information

Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.

  • Keep the device and its cord out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.
  • Do not expose to water or moisture.

3. Setup Instructions

Before beginning installation, ensure the vehicle's engine is off and any existing lights are cool to the touch.

  1. Turn off the vehicle engine and ensure the light is cool.
  2. Disconnect the power connector of the original signal light.
  3. Remove the old bulb or light assembly from the housing.
  4. Install the new signal light into the mounting position correctly.
Close-up view of the LED marker light showing its plastic housing and rubber base with wiring.
Figure 2: Product construction showing plastic housing and rubber base for durability and secure wiring.
Multiple LED marker lights installed on the rear of a truck, highlighting potential mounting locations.
Figure 3: Example installation of LED marker lights on a truck, indicating common placement areas.

Video 1: Product assembly and demonstration, showing how to connect the wires and the light's operation.

4. Operating Instructions

  1. Connect the power plug properly. If the light does not work, reverse the plug polarity.
  2. Fix the light and driver securely to avoid vibration or noise.
  3. Reinstall the light housing or cover.
  4. Test the light function to ensure normal operation.
Illumination comparison showing the red light and white light functions of the marker lamp.
Figure 4: Demonstration of Red and White light illumination modes.
Illumination comparison showing the red light and yellow light functions of the marker lamp.
Figure 5: Demonstration of Red and Yellow light illumination modes.

5. Maintenance

The LED marker lights are designed for low maintenance. Regularly inspect the lights for any physical damage or loose connections. Keep the lenses clean from dirt and debris to ensure optimal light output. Do not use harsh chemicals for cleaning; a soft cloth with mild soap and water is sufficient.

6. Troubleshooting

Light Does Not Turn On

  • Ensure the vehicle's engine is running or the ignition is in the 'on' position, and the light switch is activated.
  • Check the power connection. If the light does not work after initial connection, try reversing the plug polarity.
  • Verify that the wiring is correctly connected to the vehicle's electrical system.
  • Inspect the light for any visible damage. If damaged, replace the unit.

7. Specifications

AttributeValue
Product NameSignal Lamp
Model NameDouble Sides Marker Lights Warning Lamp For Truck Trailer Lorry Van
Brand NameRACBOX
Voltage12 V / 24 V
Item TypeTurn Signal
Light Color OptionsRed & Amber / White & Red / White Red Amber
FeaturesLED Side Marker Light, LED Turn Signal Light, LED Rear Stop Light, LED Warning Reversing Light, LED Tail Brake Light
OriginMainland China
High-concerned chemicalNone
Package Length19 cm
Package Width11 cm
Package Height9 cm
Package Weight0.375 kg
Diagram showing the dimensions of the LED marker light: 76mm diameter, 101mm height, 75mm base width, 88mm light width, 60mm light height, 32mm base depth.
Figure 6: Product dimensions for installation planning.

8. User Tips

  • The product is typically sold as a pair (2 pieces), so ensure you have the correct quantity for your installation needs.
  • When installing, double-check the polarity of the wiring. If the light does not illuminate, reversing the connection often resolves the issue.
  • Securely fasten the light and its driver to prevent movement, which can cause vibration or noise during vehicle operation.

9. Frequently Asked Questions (FAQ)

Q: Is this product sold individually or as a pair?
A: The product is typically sold as a pair (2 pieces).

10. Warranty and Support

For any issues or support, please contact the manufacturer or your point of purchase. Manufacturer information can be found in the original product documentation. A detailed user manual in PDF format is available for download: User Manual (PDF).

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.