Introduction
Thank you for choosing the LUMINTOP W1 MAX LED Flashlight. This manual provides essential information for the safe and effective use of your new flashlight. Please read it thoroughly before operation and retain it for future reference.
The W1 MAX is a high-power, compact flashlight featuring a Luminus SFT12R round emitter and COB Red & White LED, offering both long-range and floodlight capabilities. It is designed for various applications including search and rescue, camping, and everyday carry (EDC).
Safety & Warnings
- Battery Warning: Contains a battery. Do not disassemble, heat above 100°C, or incinerate.
- Choking Hazard: Contains small parts. Not suitable for children under 3 years old.
- This device is a high-intensity flashlight. To avoid potential injury, do not shine it directly into the eyes.
- Do not point the light directly at people, animals, moving vehicles, or flammable materials.
- If the flashlight will not be used for an extended period, please charge it every three months to preserve its performance.
- When carrying or storing the flashlight in a backpack or similar, set it to lock-out mode to prevent accidental activation and potential inconvenience.
- Heat Generation: High-power flashlights produce significant heat when operating in high or turbo modes. This heat is transferred to the surface through cooling fins, making it normal for the flashlight to become hot during use. Adjust usage time based on comfort.
- Non-replaceable light source: Replace the whole unit when it fails or reaches the end of its life.
- Automatic Step-Down: To prevent overheating, the flashlight will automatically reduce brightness when the temperature gets too high. Once it cools down naturally, high brightness modes can be reactivated. Repeated use of high brightness may cause a cycle of overheating and step-down.
- Actual Runtime: The runtime stated in the manual is based on ANSI standards and measured in a controlled laboratory setting. Frequent use of high or turbo modes may result in shorter battery life than the reference duration.
- No Forced Cooling: After extended use in high or turbo mode, do not place an overheated flashlight in cold water. Sudden temperature changes may cause expansion and contraction, leading to gaps at the seals and water ingress. Allow the flashlight to cool naturally to avoid damage.
- Charging Port Protection: When not charging, ensure the rubber plug fully covers the charging port to prevent moisture, corrosive liquids, or conductive objects from causing circuit malfunctions.
- Waterproofing: Flashlights with an IP68 rating offer excellent water resistance and can withstand accidental submersion in up to 2 meters of water for 30 minutes. Do not submerge the flashlight while it is hot, as thermal expansion and contraction may cause water ingress. These are not professional diving flashlights; underwater button operation is prohibited. The waterproof design is meant for accidental exposure to water, and intentional underwater use may compromise its sealing.
Setup
1. Battery Installation
The flashlight operates on one 21700 lithium-ion battery. Ensure the positive terminal of the battery faces the flashlight's head during installation.
2. Unlocking the Flashlight (First Use)
The flashlight is locked by default from the factory. For first-time use, quickly press the switch 5 times to unlock it.
Operating Instructions
Basic Operations:
- Power On/Off: Single-click the switch to turn on the floodlight at the last used brightness level (memory mode). Click again to turn it off.
- Floodlight Output Adjustment: While the flashlight is on, press and hold the switch to cycle through brightness levels (Low, High). Release the switch to select the desired brightness.
- Spot and Flood Light Toggle: Double-click the switch.
- Strobe Mode: Triple-click the switch.
- Combo Light (Spot + Flood): Quadruple-click the switch.
- Red Light Mode: When the flashlight is off, press and hold the switch to enter red light mode. Continue holding the switch to cycle through modes (Red Light Constant - Red Light SOS - Floodlight Eco Mode). Release the switch to select the desired mode.
- Indicator Light: When the flashlight is off, click the switch seven times in a row to toggle the indicator light on or off.
Mode Memory:
Under the general mode, the flashlight will remember and recall the last used flood light output level when turning on again.
Beam Demonstration:
Video: Demonstration of the LUMINTOP W1 MAX flashlight's beam distance at night.
USB-C Charging
- Rechargeable via the built-in USB-C charging port.
- Built-in overcharge protection to prevent overcharging.
- The indicator light shows battery status:
- Stand by: Green (Battery level sufficient), Red (Low battery)
- While charging: Green blink (Charging), Constant Green (Fully charged)
- After charging, replace the rubber cover to keep the flashlight waterproof.
Maintenance
Battery Usage Guidelines:
- The flashlight operates on one 21700 lithium-ion battery.
- Recharge the battery promptly when the flashlight dims.
- Replace the battery if it is damaged or nearing the end of its lifespan.
- It is recommended to use batteries from Lumintop or another reputable source.
Waterproofing:
The W1 MAX has an IP68 rating, meaning it can withstand submersion up to 2 meters underwater for 30 minutes. Always ensure the charging port's rubber cover is securely in place to maintain this rating.
Troubleshooting (Multiple Protection Functions)
The W1 MAX is equipped with multiple intelligent protection features to ensure safe and reliable operation. These functions automatically address potential issues:
- Anti-reverse Protection: Prevents damage from incorrect battery installation.
- Over-discharge Protection: Prevents damage to the battery from excessive discharge.
- Over-heat Protection: When the flashlight's temperature is high, it will automatically reduce the output to prevent overheating and ensure comfortable use.
- Over-charge Protection: Prevents damage to the battery from overcharging.
- Low Voltage Protection: When the battery voltage drops, the flashlight will automatically reduce the output and eventually shut down to protect the battery.
Specifications
| Feature | Detail |
|---|---|
| Light Source | Luminus SFT12R LED + COB Red & White LED |
| Output (Max) | 800 LM |
| Lighting Distance (Max) | 500 m |
| Max Beam Intensity | 62500 cd |
| Power | 18W (max) |
| Battery | 1 x 21700 Li-ion (Included) |
| Charger | Rechargeable (USB-C) |
| Waterproof | IP68, underwater 2m |
| Impact Resistant | 1m |
| Size | 37 x 27 x 130mm |
| Net Weight | Approx. 136g (battery excluded) |
| Switch Mode | High/Middle/Low (Floodlight), Spot, Combo, Red Light, SOS, Strobe |
| Focal Length | Non-adjustable |
| Zoom | No |
| Function | Shock Resistant, Self Defense, Hard Light |
Notice: The above approximate data are lab-tested and may vary due to the difference between the environment and battery. The runtime on High, Spot light, and combo are accumulated due to the over-heat protection settings.
User Tips
- For first use, quickly click the switch 5 times to unlock the flashlight.
- Ensure the battery is installed with the positive terminal facing the flashlight's head.
- The flashlight remembers the last used flood light output level, providing convenience for regular use.
- Regularly check the charging port rubber cover to maintain the flashlight's IP68 waterproofing, especially after charging.
- The W1 MAX features distinct 'Floodlight Output Adjustment' (cycling Low/High) rather than a continuous ramping mode.
Warranty & Support
Warranty Terms:
- 30 Days from Purchase: Free repair or replacement for manufacturing defects.
- 5 Years from Purchase: LUMINTOP will repair products free of charge within 5 years of purchase (2 years for products with a built-in battery, 1 year for the battery) if issues occur under normal use.
- Lifetime Warranty: After the warranty period, repairs are available for a fee covering parts as needed.
Exclusions:
This warranty does not cover normal wear and tear, improper maintenance, abuse, force majeure, or damage caused by human factors.
Contact Information:
Shenzhen Lumintop Optoelectronic Co., Ltd.
Address: 701, Zhichuang Industrial Building, Chengxin Road, Baolong Community, Baolong Subdistrict, Longgang District, Shenzhen, China 518116
Web: www.lumintop.com
Tel: +86-755-88838666
E-mail: service@lumintop.com
For additional information, you may refer to the official user manual PDF: LUMINTOP W1 MAX User Manual (PDF)
Environmental Disposal
This symbol on electrical and electronic products and attached documents indicates that such products shall not be disposed of as general household waste. Instead, they shall be sent to designated recycling stations where they will be received free of charge for appropriate disposal. Proper disposal of waste products helps preserve natural resources and reduces adverse impacts of improper waste management on human health and the environment.
Please contact relevant authorities for information about your nearest WEEE (Waste Electrical and Electronic Equipment) collection points. Improper disposal of such wastes may result in fines or other penalties in accordance with the law.
Package Contents
The LUMINTOP W1 MAX package typically includes:
- 1 x LUMINTOP W1 MAX Flashlight
- 1 x Charging cable (USB-C)
- 1 x Lanyard
- 1 x User Manual