1. Introduction
Thank you for choosing the coolo Tuya ZigBee Smart Knob Switch. This device is a versatile, battery-powered smart controller designed to enhance your smart home experience. It functions as both a scene switch and a remote dimmer for ZigBee bulbs, integrating seamlessly with Tuya Smart Life and ZigBee ecosystems. Please read this manual carefully before use to ensure proper installation and operation.
2. Safety Information
- This device is for indoor use only.
- Do not expose the device to moisture, extreme temperatures, or direct sunlight.
- Do not attempt to disassemble or repair the device yourself. Refer all servicing to qualified personnel.
- Keep out of reach of children.
- Dispose of batteries according to local regulations.
3. Package Contents
- 1 x ZigBee Smart Knob Switch
- 1 x CR2032 Battery (pre-installed or included)
- 1 x User Manual
4. Product Overview
The Smart Knob Switch is a compact, wireless device that offers multiple control options through its rotatable and pressable knob. It requires a ZigBee hub/gateway to function.

Figure 1: Smart Knob Switch Overview. Works with ZigBee, Tuya, and Smart Life. Supports Single Press, Double Press, Long Press, Rotate, and Press and Rotate actions.
Device Components
- Knob/Button: The main interactive element for pressing and rotating.
- Battery Compartment: Located on the back, for the CR2032 battery.
- Reset Button: A small button inside the battery compartment or on the back for pairing and resetting.
- LED Indicator: Provides feedback during pairing and operation.
5. Setup
5.1 Prerequisites
- A ZigBee Gateway/Hub (e.g., Tuya ZigBee Gateway) connected to your home network.
- The Tuya Smart Life App installed on your smartphone (available on iOS and Android).
- A stable Wi-Fi connection for your ZigBee Gateway.
5.2 Pairing the Device
- Ensure your ZigBee Gateway is powered on and connected to the Tuya Smart Life App.
- Open the Tuya Smart Life App and navigate to your ZigBee Gateway.
- Select 'Add sub-device' or 'Search for device'.
- On the Smart Knob Switch, press and hold the reset button (usually located on the back or inside the battery compartment) for approximately 5 seconds until the LED indicator light flashes rapidly.
- The app should detect the new device. Follow the on-screen prompts to add it to your network.
- Once successfully added, you can rename the device and assign it to a room.

Figure 2: Triggering smart scenes and routines in the Tuya Smart App.
5.3 Physical Installation (Optional)
The switch can be placed on any flat surface or mounted to a wall using adhesive (not always included) or screws. Ensure the chosen location allows for easy access and optimal ZigBee signal.
6. Operating Instructions
The Smart Knob Switch supports various actions that can be configured within the Tuya Smart Life App to control smart scenes or ZigBee bulbs.

Figure 3: The switch features Scenario Mode for scene control and Remote Mode for dimming ZigBee bulbs. Remote Mode is only compatible with ZigBee bulbs.
6.1 Modes of Operation
- Scenario Mode: Use the switch to trigger pre-defined smart scenes in the Tuya Smart Life App. For example, a single press could turn on your 'Movie Night' scene.
- Remote Mode: Use the switch as a remote dimmer for ZigBee bulbs. This mode allows you to turn the bulb on/off and adjust its brightness by rotating the knob. Note: This mode is only available for ZigBee bulbs.
6.2 Configurable Actions
Each action can be assigned a specific function or scene within the Tuya Smart Life App.

Figure 4: Configuration options in the Smart Life App for various knob actions, including single click, double click, long press, clockwise rotation, and anticlockwise rotation.
- Single Press:
- In Remote Mode: Toggles the connected ZigBee bulb ON/OFF.
- In Scenario Mode: Triggers a configured smart scene.
- Double Press:
- Triggers a configured smart scene, often used for 'Away Mode' to turn off multiple devices.
- Long Press:
- Triggers a configured smart scene.
- Rotate (Clockwise/Anticlockwise):
- In Remote Mode: Adjusts the brightness of the connected ZigBee bulb (clockwise to brighten, anticlockwise to dim).
- In Scenario Mode: Can be configured to trigger different scenes based on rotation direction.
- Press and Rotate:
- Triggers a configured smart scene.

Figure 5: Single press action to turn a ZigBee bulb ON or OFF. Ensure the app is in remote mode for bulb control.

Figure 6: Double press action can be configured for 'Away Mode' to switch off lights, air conditioners, fans, and other electronic devices.
7. Maintenance
7.1 Battery Replacement
The device is powered by a CR2032 coin cell battery. When the battery is low, the device may become unresponsive or the LED indicator might signal a low battery. To replace:
- Gently twist or pry open the back cover of the switch to access the battery compartment.
- Remove the old CR2032 battery.
- Insert a new CR2032 battery with the positive (+) side facing up.
- Replace the back cover, ensuring it is securely closed.
7.2 Cleaning
Wipe the device with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
8. Troubleshooting
- Device not responding: Check the battery level and replace if necessary. Ensure the device is within range of your ZigBee gateway. Verify the gateway is online and functioning correctly.
- Cannot pair the device: Ensure the device is in pairing mode (LED flashing rapidly). Make sure your ZigBee gateway is in pairing mode in the app. Try resetting the device by holding the reset button for 10 seconds, then attempt pairing again.
- Actions not triggering scenes/bulbs: Verify that the actions are correctly configured in the Tuya Smart Life App. For bulb control, ensure the app is set to 'Remote Mode' and the bulb is a ZigBee compatible bulb.
- Intermittent connection: Ensure there are no major obstructions (like thick walls or metal objects) between the switch and the ZigBee gateway. Consider adding ZigBee repeater devices if your network is large.
9. Specifications
| Feature | Specification |
|---|---|
| Brand | coolo |
| Model Number | ZigBee Smart Knob Switch |
| Item Type | SWITCHES |
| Switch Type | Knob switch |
| Connectivity | ZigBee |
| Is Smart Device | Yes |
| Power Supply | CR2032 Battery |
| Battery Life | Approx. 1 year (based on 20 operations/day) |
| Current Rating | 1A |
| Material | Plastic |
| Dimensions | 50mm x 50mm x 18mm |
| Working Temperature | -10℃ to 45℃ |
| Working Humidity | 0% to 95% RH (non-condensing) |
| Origin | Mainland China |
| Certifications | UL, RoHS, LVD, CE |
10. Warranty and Support
This product comes with a standard manufacturer's warranty. For warranty claims, technical support, or further assistance, please contact your original seller or the manufacturer directly. Please retain your proof of purchase.
For additional information, you may refer to the official product documentation available at: User Manual (PDF)