Introduction
This manual provides essential instructions for the safe and efficient operation of your T&G TG116c Bluetooth Speaker. Please read this manual thoroughly before using the product and retain it for future reference.
Safety Information
- Do not expose the speaker to extreme temperatures or direct sunlight.
- Avoid dropping or subjecting the speaker to strong impacts.
- Keep the speaker away from water and liquids, despite its splash-proof design, to prevent damage.
- Do not attempt to disassemble or repair the speaker yourself. Contact qualified service personnel.
- Use only the specified charging voltage (5V/500mA) to prevent damage to the battery.
Package Contents
Please check that all items are present:
- T&G TG116c Bluetooth Speaker
- USB Charging Cable (Type-C)
- Audio Line (AUX cable)
- User Manual (this document, also available as PDF here)
Product Overview
Familiarize yourself with the speaker's components and controls.
Key and Slot Functions (Refer to the original PDF manual for a visual diagram):
- DC 5V Slot: Standard Type-C charging port.
- TF Slot: For Micro SD card playback of MP3 audio.
- USB Slot: For USB card playback of MP3 audio.
- LINE IN Slot: 3.5mm audio input for external devices.
- Control Buttons (Top Panel):
- Power Button (8): Long press to power on/off. Short press for Play/Pause in music mode.
- Volume Down / Previous Track (5): Short press for previous song, long press to decrease volume.
- Volume Up / Next Track (6): Short press for next song, long press to increase volume.
- Mode Switch (7): Short press to switch between TF card, LINE IN, USB, Wireless (Bluetooth), and FM modes.
- M Button (TWS Pairing): Long press for 2-3 seconds in Wireless mode to initiate TWS pairing.
Specifications
| Feature | Specification |
|---|---|
| Model | TG116c |
| Bluetooth Version | 5.3 |
| Wireless Range | Up to 10 meters |
| SNR (Signal-to-Noise Ratio) | ≥90dB |
| Battery Capacity | 1200mAh |
| Built-in Voltage | 3.7V |
| Playback Time (Normal Volume) | Approximately 3 hours |
| Speaker Driver Size | 52mm * 2 |
| Output Power | 5W * 2 |
| PMPO (Peak Music Power Output) | 10W |
| Frequency Response | 150Hz-20KHz |
| Unit Dimensions (L x W x H) | 180mm x 80mm x 80mm |
| Unit Weight | 557g |
| Charging Voltage | 5V/500mA |
| Charging Time | 3-4 hours |
| Waterproof Rating | IPX5 (Splash-proof) |
| Audio Crossover | Full-Range |
| Built-in Microphone | Yes |
| Supported Playback Functions | Radio, MP3 (via Micro SD/USB), Bluetooth, AUX |
| Certifications | CE, FCC |
Setup Guide
1. Charging the Speaker
Before first use, fully charge the speaker. Connect the provided USB Type-C charging cable to the DC 5V slot on the speaker and the other end to a 5V/500mA USB power adapter (not included).
- Charging time: Approximately 3-4 hours.
- The charging indicator light will show the charging status (specific behavior not detailed in manual, typically red while charging, off/blue when full).
2. Power On/Off
Long press the Power Button (8) for a few seconds to turn the speaker ON or OFF.
3. Bluetooth Pairing
The speaker will automatically enter Bluetooth pairing mode when powered on if no other mode is selected.
- Ensure the speaker is ON and in Wireless (Bluetooth) mode (short press Mode button (7) if necessary).
- On your device (phone, tablet, computer), enable Bluetooth and search for available devices.
- Select "TG116c" from the list of devices.
- Once paired, the speaker will indicate a successful connection (e.g., an audible prompt).
4. TWS (True Wireless Stereo) Pairing (Connecting Two Speakers)
To achieve 3D stereo sound, you can pair two TG116c speakers together.
- Ensure both speakers are ON and in Wireless (Bluetooth) mode, but NOT connected to any mobile device.
- On one of the speakers, long press the 'M' button (7) for 2-3 seconds until you hear a "du du du" prompt. The indicator light on this speaker should stop flashing, indicating it's ready for TWS pairing.
- The two speakers will automatically pair with each other.
- Once TWS paired, connect your mobile device to one of the speakers via Bluetooth as described in "3. Bluetooth Pairing". The audio will now play in stereo across both speakers.
5. Connecting via AUX (Audio Line)
- Connect one end of the provided 3.5mm audio line to the LINE IN slot (4) on the speaker.
- Connect the other end to the audio output jack of your external device (e.g., computer, MP3 player).
- The speaker will automatically switch to AUX mode, or you may need to short press the Mode button (7) to select LINE IN mode.
6. Using Micro SD Card / USB Drive
The speaker supports MP3 format audio playback from Micro SD cards and USB drives (FAT32 format recommended).
- Insert a Micro SD card into the TF Slot (2) or a USB drive into the USB Slot (3).
- The speaker will automatically detect the storage and begin playing MP3 files, or you may need to short press the Mode button (7) to select TF or USB mode.
Operation
1. Music Playback
- Play/Pause: Short press the Power Button (8).
- Volume Control: Long press the Volume Up (6) button to increase volume. Long press the Volume Down (5) button to decrease volume.
- Next Track: Short press the Volume Up (6) button.
- Previous Track: Short press the Volume Down (5) button.
2. FM Radio
For better FM reception, connect the USB Type-C charging cable to the speaker's charging port; it acts as an antenna.
- Short press the Mode button (7) to switch to FM mode.
- Automatic Station Scan: In FM mode, short press the Power Button (8) to automatically scan for and save available radio stations.
- Stop Scanning: Press the Power Button (8) again to stop the automatic scan.
- Switch Stations: Use the Volume Up (6) and Volume Down (5) buttons to navigate through saved stations.
3. Hands-Free Calling
When the speaker is connected to your phone via Bluetooth:
- Answer Call: Short press the Power Button (8) when an incoming call rings.
- End Call: Short press the Power Button (8) during a call.
- Redial Last Number: Double-click the Power Button (8).
4. Mode Switching
Short press the Mode button (7) to cycle through available modes: TF Card, LINE IN, USB, Wireless (Bluetooth), FM Radio.
Troubleshooting
| Problem | Possible Solution |
|---|---|
| Speaker does not turn on. | Ensure the battery is charged. Connect to a power source and charge for 3-4 hours. |
| Cannot pair via Bluetooth. |
|
| No sound from speaker. |
|
| Poor FM radio reception. | Connect the USB Type-C charging cable to the speaker; it functions as an external antenna to improve signal strength. |
| Micro SD/USB playback not working. |
|
| Speaker automatically turns off. | The speaker will automatically shut down after 30 minutes if it is disconnected from a Bluetooth device. Reconnect or switch modes to keep it active. |
Maintenance
- Cleaning: Use a soft, dry cloth to clean the speaker. Do not use abrasive cleaners or solvents.
- Storage: Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: To prolong battery life, charge the speaker regularly, even if not in frequent use. Avoid fully discharging the battery for extended periods.
User Tips
- FM Radio: For optimal FM radio performance, always plug in the USB charging cable to act as an antenna. While the manual describes automatic scanning, it does not detail how to manually save specific stations. Users may need to rely on the automatic scan and then cycle through found stations.
- Sound Quality: Some users note that the speaker is small. While it offers 3D stereo sound with TWS, manage expectations regarding bass depth typical of larger speakers.
Warranty and Support
For detailed warranty information, technical support, or service inquiries, please refer to the official user manual PDF or contact your retailer. The full user manual is available for download here.