IRALAN DX10-FAN

Contents

IRALAN Modern LED Ceiling Fan Light

Model: DX10-FAN

1. Introduction

Thank you for purchasing the IRALAN Modern LED Ceiling Fan Light. This product combines efficient LED lighting with a powerful ceiling fan, designed to provide comfort and illumination to your living spaces. Please read this manual carefully before installation and use to ensure safe operation and optimal performance.

2. Safety Instructions

  • Ensure the power supply is turned off at the circuit breaker before installation, cleaning, or maintenance.
  • Installation must be performed by a qualified electrician or a person with sufficient electrical knowledge.
  • Use only the parts supplied by the manufacturer.
  • Ensure the mounting surface can support the weight of the fan light (approximately 4.5 kg).
  • Do not connect the fan light to a dimmer switch not specifically designed for ceiling fans with integrated LED lights.
  • Keep children away from the fan light during operation and installation.
  • Do not insert any objects into the fan blades while they are rotating.
  • This product is designed for indoor use only.

3. Package Contents

Before beginning installation, ensure all components are present:

  • Ceiling Fan Light Assembly (Motor, Plate, Bottom Plate)
  • 10 Petals (with pre-attached tubes and wires)
  • Short Thread Pipes and Plastic Pipes
  • Remote Control
  • Mounting Cross Bracket
  • Screws, Nuts, and Plastic Caps
  • User Manual (this document)

4. Setup and Installation

Note: Installation requires assembly and electrical wiring. If you are unsure, consult a qualified electrician.

  1. Unpack Components: Open the box and carefully take out all components.
  2. Assemble Petals: Assemble the tubes to the petals. Each petal has two tubes; ensure the wire of the petal goes through one of the tubes.
  3. Attach Motor to Plate: Assemble the motor to the main plate. Locate the three holes to secure the motor and fasten it with the small nuts.
  4. Install Petals to Rings: Install the petals using the short thread pipes onto the holes of the outer ring. Install the petals with plastic pipes onto the inner ring as shown in the diagram.
  5. Prepare Bottom Plate: Take off the screw from the bottom plate.
  6. Attach Bottom Plate: Twist the nuts onto the three bolts as shown, then assemble these three bolts to the bottom plate.
  7. Secure Bottom Plate to Light: Assemble the bottom plate to the light. Twist three bolts from the other side to secure the plate.
  8. Connect Wires: Connect all the wires to the collector, paying attention to the direction of each port. Install the plug on the hub to the motor connection.
  9. Install Motor Plug: Install the motor plug to the power-driven VH port.
  10. Assemble Blade and Cap: Assemble the fan blade to the light and fasten it with the plastic cap. Twist the cap in an anticlockwise direction.
  11. Install Cross Bracket: Install the cross mounting bracket to the ceiling using appropriate screws. Ensure it is securely fastened to a joist or suitable anchor.
  12. Connect to Home Cable: Connect the wires of the light to your home's electrical cable. Then, install the light fixture to the cross bracket by twisting the screws to join them together.
Assembly instruction diagram showing 12 steps for installing the 10-petal ceiling fan light.
Figure 1: Detailed Assembly Instructions for the 10-Petal Ceiling Fan Light

5. Operating Instructions

Your IRALAN Ceiling Fan Light can be controlled via the included remote control or a dedicated mobile application.

5.1 Remote Control Operation

Diagram of the remote control functions and instructions for APP control.
Figure 2: Remote Control Layout and Functions
  • All Off: Turns off both light and fan.
  • Timing Setting: Sets a timer for operation.
  • F/R (Reverse Fan): Changes the fan's rotating direction (for Winter/Summer modes).
  • Pairing: To pair the remote, turn on the light and immediately press the pairing button on the remote.
  • Fan On/Off: Toggles the fan power.
  • Fan Speed (1-6): Buttons 1 through 6 control the fan speed.
  • Increase/Reduce Brightness: Adjusts the light intensity.
  • Changing Color Temperature: Cycles through different light color temperatures (Warm, Natural, Cold).
  • Night Lamp: Activates a low-brightness night light mode.
  • Lamp On/Off: Toggles the light power.

5.2 Mobile App Control

The mobile app offers comprehensive control over your fan light, including 6-speed adjustment, forward/reverse steering, night light mode, brightness adjustment, and color temperature adjustment.

  1. Step 1: Download App
    Scan the QR Code provided in Figure 3 (or on the remote control diagram) to download and install the app on your mobile phone.
  2. Step 2: Pair Device
    Turn on the fan light. Open the app, search for the light device, and pair them.
Screenshots of the mobile app interface for controlling fan speed, direction, light dimming, and color temperature, with a QR code for app download.
Figure 3: Mobile App Interface and QR Code for Download

5.3 Light Functions

The integrated LED light offers adjustable brightness and three distinct color temperatures:

  • 3000K Warm Light: Creates a cozy and inviting atmosphere.
  • 4500K Natural Light: Provides a balanced and comfortable illumination, ideal for general use.
  • 6500K Cold Light: Offers bright, crisp lighting suitable for tasks or a more energetic environment.
Images showing the light at 3000K (Warm), 4500K (Natural), and 6500K (Cold) color temperatures, along with a remote control and brightness/color temperature adjustment scales.
Figure 4: Adjustable Brightness and Color Temperature Options

5.4 Fan Functions (Winter/Summer Modes)

The fan features a reversible motor to optimize air circulation for different seasons:

  • Summer Mode (Downdraft): The fan blades rotate counter-clockwise, pushing air downwards to create a cooling breeze.
  • Winter Mode (Updraft): The fan blades rotate clockwise, drawing air upwards to circulate warm air trapped near the ceiling, helping to balance room temperature.
Diagram illustrating winter (updraft) and summer (downdraft) modes for air circulation.
Figure 5: Winter and Summer Fan Modes
Visual comparison of summer (downward airflow for cooling) and winter (upward airflow for air circulation) fan modes.
Figure 6: Airflow Direction in Summer vs. Winter Modes

6. Maintenance

  • Cleaning: Always turn off the power before cleaning. Use a soft, damp cloth to wipe the surfaces of the fan light. Do not use abrasive cleaners or solvents, as they may damage the finish.
  • Blade Cleaning: Periodically wipe the fan blades to prevent dust buildup, which can affect performance and balance.
  • No User-Serviceable Parts: The LED light source and motor are integrated and not user-replaceable. Do not attempt to disassemble the unit beyond the initial installation.

7. Troubleshooting

  • Fan or Light Not Working: Check if the power supply is on. Ensure all electrical connections are secure. Verify the remote control batteries are not depleted.
  • Remote Control Not Responding: Replace the batteries in the remote control. Ensure the remote is within range and pointed towards the fan light. Re-pair the remote if necessary (refer to Section 5.1).
  • Fan Wobbles: Ensure the mounting bracket is securely fastened to the ceiling. Check that all screws on the fan assembly are tightened.
  • Noise from Fan: Ensure all screws are tight. Check for any obstructions in the fan's path.
  • App Control Issues: Ensure your phone's Bluetooth/Wi-Fi is on and the fan light is powered. Try re-pairing the device in the app.

8. Specifications

FeatureSpecification
Model NumberDX10-FAN (KDL)
Dimensions (Diameter x Height)77 cm x 16 cm
Light SourceIntegrated LED
Luminous Flux8280 LM
Power Consumption92 W
Voltage85-265V AC
Control MethodRemote Control, Mobile App
DimmableYes
Color Temperature3000K (Warm), 4500K (Natural), 6500K (Cold)
Fan Speeds6 Speeds
Fan DirectionReversible (Winter/Summer Modes)
Body MaterialAcrylic, Aluminum Alloy
Weight4.5 kg
Application Space15-25 M²
CertificationCE
Product dimensions (Diameter: 77CM, Height: 16CM) and a table of specifications.
Figure 7: Product Dimensions and Key Specifications

9. User Tips

  • Quiet Operation: For nighttime use, fan speeds 1-2 are generally very quiet and ideal.
  • Brightness Control: The high brightness (lumens) of the light is fully controllable via the remote, allowing you to set the perfect ambiance.
  • Assembly Time: Be aware that assembly can take some time due to the number of components. Follow the instructions carefully.
  • Mounting Surface: Ensure your ceiling's base material (e.g., plywood, concrete) is robust enough to securely hold the fan light. Additional reinforcement may be needed for weaker materials.

10. Frequently Asked Questions (FAQ)

Q: What are the dimensions of the lamp?
A: The lamp has a diameter of 77 cm and a height of 16 cm.
Q: How many petals does the lamp have?
A: The lamp design features 10 petals.
Q: Where can I find the link for the app?
A: You can scan the QR code provided in Figure 3 (Section 5.2) or on the remote control diagram (Figure 2) to download the mobile application.

11. Warranty and Support

This IRALAN Ceiling Fan Light comes with a 2-year warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims.

For technical support, troubleshooting assistance, or warranty inquiries, please contact your retailer or the official IRALAN customer service channel.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.