CNSPEED 60mm Turbo Boost Gauge with Adjustable Turbo Boost Controller Kit

Contents

CNSPEED 60mm Turbo Boost Gauge and Adjustable Turbo Boost Controller Kit

User Manual

Model: 60mm Turbo Boost Gauge with Adjustable Turbo Boost Controller Kit

Brand: CNSPEED

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your CNSPEED 60mm Turbo Boost Gauge and Adjustable Turbo Boost Controller Kit. This kit is designed to monitor and control the turbo boost pressure in most 12V vehicles, enhancing performance and providing critical engine data. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Safety Information

  • Always disconnect the vehicle's battery before performing any electrical work.
  • Ensure all connections are secure and properly insulated to prevent short circuits.
  • Do not attempt installation if you are unfamiliar with automotive electrical systems or turbocharger components. Professional installation is highly recommended.
  • Wear appropriate personal protective equipment (PPE) during installation.
  • Keep all components away from moving engine parts and extreme heat sources.
  • Verify all settings and connections before operating the vehicle.

3. Package Contents

Please check the package contents against the list below. If any items are missing or damaged, contact your retailer.

  • 1 * Turbo Boost Gauge
  • 1 * Boost Sensor (NPT1/8)
  • 1 * English Manual (This document)
  • 2 * Billet Mounting Bracket
  • 1 * Diverter Tee
  • 1 * Manual Boost Controller
  • Hose, clamps, and all necessary hardware for complete installation
Image showing all components included in the CNSPEED Turbo Boost Gauge and Controller Kit, including the gauge, boost controller, sensor, hoses, clamps, and mounting brackets.

Figure 1: Package Contents Overview

4. Specifications

4.1. Turbo Boost Gauge

Feature Specification
Power DC 12V Professional
Diameter 2.5 inches / 60mm
Unit Kpa
Measurement Range 0~2 (100kpa)
Universal Fit Most 12Volt Cars
Backlight Two (White and Red light)
Color Black Face / White Light & Red Light
Special Features Pointer Turbo Boost bar Gauge
Material ABS & Glass & Steel
Item Weight 0.6 KG
Item Dimensions (L x W x H) 60mm x 60mm x 60mm
Diagram showing the dimensions of the 60mm turbo boost gauge, with a diameter of 60mm (2.36 inches) at the base and 71mm (2.79 inches) at the bezel, and a depth of 65mm (2.55 inches).

Figure 2: Turbo Boost Gauge Dimensions

4.2. Turbo Boost Controller Kit

Feature Specification
Boost Control Range 1~30 PSI Capacity
Material CNC Machined Aluminum Body
Dimensions (L x W x H) 3.2 x 0.75 x 0.75 inches (approx.)
OEM NO. Car BAR Turbo Boost gauge with Boost Sensor
Manufacturer Part Number YC101347+YC100268
Diagram showing the dimensions of the boost controller, with a length of 74mm (2.91 inches) and a width of 39mm (1.53 inches).

Figure 3: Turbo Boost Controller Dimensions

5. Setup and Installation

Professional installation is highly recommended for this product. Incorrect installation can lead to vehicle damage or personal injury.

5.1. Turbo Boost Gauge Installation

  1. Choose a suitable mounting location for the gauge inside the vehicle cabin, ensuring it does not obstruct your view or interfere with driving controls.
  2. Use the provided billet mounting brackets to securely fasten the gauge.
  3. Connect the boost sensor (NPT1/8) to an appropriate pressure source port on your engine.
  4. Route the signal wires from the boost sensor to the gauge.
  5. Connect the power cord to a 12V DC power source (e.g., ignition switched power) and ground. Ensure proper polarity.
  6. Connect the backlight wires to your vehicle's dashboard lighting circuit if you wish to utilize the white and red backlight features.
  7. Secure all wiring and hoses to prevent chafing or interference.
Image highlighting key features of the turbo boost gauge, including its 1-2 bar measurement range, plastic insulated dial, ABS plastic material for corrosion and heat resistance, and white and red dial colors.

Figure 4: Turbo Boost Gauge Features

5.2. Turbo Boost Controller Installation (Internal Wastegate Setup)

Follow these steps carefully for installing the boost controller with an internal wastegate system:

  1. Engine Cool Down: Allow the engine to cool down completely before starting. Locate the pressure source port and the wastegate actuator port on the turbocharger.
  2. Remove Factory Solenoid: If a factory boost control solenoid is fitted, remove it from the boost pressure supply port. Keep the solenoid connected to the ECU.
  3. Install Tee Piece: Install the provided tee piece in the wastegate pressure line. Ensure the arrow on the tee piece points towards the wastegate actuator. Run a pressure line from the tee piece into the vehicle cabin and connect it to the bottom port of the boost controller.
  4. Connect Top Vent Port: Run a second pressure hose line from the engine bay into the cabin and connect it to the top vent port of the boost controller.
  5. Block Additional Ports: If your wastegate actuator has any additional ports, these must be blocked off.
  6. Secure Hoses: Secure all silicone hose ends with the provided hose clamps to prevent leaks.
  7. Mount Boost Controller: Mount the boost controller bracket inside the vehicle cabin and attach the boost controller using the supplied screws.
  8. Initial Adjustment: Ensure the boost dial on the controller is turned completely anti-clockwise (minimum setting) before making any adjustments or starting the vehicle.
Detailed diagram illustrating the internal wastegate setup for the turbo boost controller. It shows the connections between the pressure source port, wastegate actuator port, tee piece, and the boost controller, with arrows indicating flow direction.

Figure 5: Internal Wastegate Setup Diagram

6. Operating Instructions

6.1. Turbo Boost Gauge Operation

Once installed and powered, the gauge will display the current turbo boost pressure in Kpa. The needle will move dynamically with changes in boost. The dual backlight (white and red) can be switched or set according to your wiring configuration.

6.2. Turbo Boost Controller Operation

The manual boost controller allows you to adjust the boost pressure. To increase boost, turn the dial clockwise in small increments. To decrease boost, turn the dial anti-clockwise. Always make small adjustments and monitor the boost gauge closely to avoid over-boosting, which can damage your engine. It is recommended to perform adjustments on a dynamometer or under controlled conditions.

Video 1: Product Overview and Boost Controller Demonstration

7. Maintenance

  • Regular Inspection: Periodically check all hose connections and clamps for tightness and signs of wear or leaks.
  • Wiring Check: Inspect electrical wiring for any signs of damage, fraying, or loose connections.
  • Gauge Cleaning: Clean the gauge face with a soft, damp cloth. Do not use abrasive cleaners or solvents.
  • Boost Controller: Ensure the boost controller dial turns smoothly and is free from debris.

8. Troubleshooting

8.1. Gauge Not Lighting Up

  • Check power and ground connections.
  • Verify the fuse in the power circuit.
  • Ensure backlight wires are correctly connected to the vehicle's lighting circuit.

8.2. Incorrect Boost Reading

  • Check for leaks in the pressure lines and connections to the boost sensor.
  • Ensure the boost sensor is correctly installed and free from obstructions.
  • Verify the boost controller is properly installed and not causing unintended pressure fluctuations.

8.3. Boost Not Changing with Controller Adjustment

  • Ensure the tee piece is correctly oriented with the arrow pointing towards the wastegate actuator.
  • Check for any blockages or kinks in the pressure lines connected to the boost controller.
  • Verify that the wastegate actuator is functioning correctly.

9. User Tips

  • Gradual Adjustments: When adjusting boost, always do so in small increments and monitor the gauge carefully to prevent engine damage from over-boosting.
  • Leak Prevention: Double-check all hose connections and use hose clamps to ensure a tight, leak-free seal. Even small leaks can affect boost readings and control.
  • Professional Help: If you are unsure about any part of the installation or adjustment process, consult a qualified automotive technician.

10. Warranty and Support

For any questions, technical support, or warranty claims, please contact the CNSPEED Auto Parts Store directly through your purchase platform. Please refer to the original product page for specific warranty terms and conditions.

An additional user manual in PDF format may be available for download. Please check the product page or contact support for access to the User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.