Introduction
Thank you for choosing the Casio A158WA-1D Digital Watch. This manual provides detailed instructions on how to set up and operate your watch, ensuring you can fully utilize its features. Please read this manual carefully and keep it for future reference.
Image: Front view of the Casio A158WA-1D Digital Watch.
Features
Your Casio A158WA-1D watch comes equipped with the following features:
- Digital Time Display (Hour, Minute, Second, AM/PM)
- Full Auto-Calendar (Date, Day, Month, automatically adjusts for 28 days in February)
- Daily Alarm Function
- Hourly Time Signal
- 1/100-second Stopwatch (Measuring capacity: 59 minutes 59.99 seconds)
- LED Backlight for illumination
- Water Resistance (3 Bar)
- Durable Resin Case and Stainless Steel Band
- Long Battery Life (Approx. 7 years with CR-2016 battery)
Operating Instructions
Button Functions
Your watch has four buttons, typically labeled A, B, C, and L. For this model, the buttons are generally:
- Light (Top Left): Activates the LED backlight.
- Lap/Reset (Bottom Left): Used for lap/reset in stopwatch mode, and for navigating settings.
- Mode (Top Right): Cycles through different watch modes (Timekeeping, Alarm, Stopwatch).
- Start/Stop/12-24H (Bottom Right): Used for starting/stopping stopwatch, adjusting values in setting modes, and toggling 12/24-hour format.
Reading the Display
The display shows different information depending on the mode:
- Regular Timekeeping Mode: Displays Hour, Minute, Second, AM/PM indicator, Date, and Day of the week (SU, MO, TU, WE, TH, FR, SA).
- Daily Alarm Mode: Shows the set alarm time, along with alarm-on-mark and time-signal-on-mark indicators.
- Stopwatch Mode: Displays minutes, seconds, and 1/100th of a second.
To switch between 12-hour and 24-hour formats in regular timekeeping mode, press the Start/Stop/12-24H (A) button.
Setup
Setting Time and Calendar
- From the Regular Timekeeping Mode, press the Mode (C) button three times to enter the Time/Calendar Setting Mode. The seconds digits will start flashing.
- Press the Start/Stop/12-24H (A) button to adjust the seconds.
- Press the Lap/Reset (B) button to move the flashing selection to the hour setting. Press the Start/Stop/12-24H (A) button to increase the hour.
- Press the Lap/Reset (B) button again to move to the minute setting. Press the Start/Stop/12-24H (A) button to increase the minute.
- Continue pressing the Lap/Reset (B) button to cycle through Month, Date, and Day settings. Use the Start/Stop/12-24H (A) button to increase the Month and Date, and to advance the Day.
- Once all settings are correct, press the Mode (C) button to exit the setting mode and return to regular timekeeping.
Note: If no button is pressed for a few minutes while a selection is flashing, the watch will automatically exit the setting mode.
Setting the Daily Alarm
- From Regular Timekeeping Mode, press the Mode (C) button once to enter the Daily Alarm Mode. The hour digits will flash.
- Press the Start/Stop/12-24H (A) button to set the desired alarm hour.
- Press the Lap/Reset (B) button to move the flashing selection to the minute setting. Press the Start/Stop/12-24H (A) button to set the desired alarm minute.
- Press the Mode (C) button to exit the alarm setting mode.
To stop the alarm buzzer: When the alarm sounds, press any button (e.g., Light (L)) to stop it.
Turning Alarm and Time Signal On/Off
In Daily Alarm Mode, press the Start/Stop/12-24H (A) button to cycle through the following settings:
- Alarm and Time Signal ON (both indicators appear)
- Alarm and Time Signal OFF (both indicators disappear)
- Alarm ON only (alarm-on-mark appears)
- Time Signal ON only (time-signal-on-mark appears)
Stopwatch Operation
The stopwatch measures elapsed time up to 59 minutes, 59.99 seconds. A signal confirms start/stop operations.
- From Regular Timekeeping Mode, press the Mode (C) button twice to enter Stopwatch Mode.
- Net Time Measurement:
- Press Start/Stop/12-24H (A) to Start.
- Press Start/Stop/12-24H (A) to Stop.
- Press Start/Stop/12-24H (A) to Re-start.
- Press Start/Stop/12-24H (A) to Stop.
- Press Lap/Reset (B) to Reset to 00:00:00.
- Split Time Measurement:
- Press Start/Stop/12-24H (A) to Start.
- Press Lap/Reset (B) to record Split time (display freezes, but timing continues).
- Press Lap/Reset (B) again to release Split time (display shows current elapsed time).
- Press Start/Stop/12-24H (A) to Stop.
- Press Lap/Reset (B) to Reset to 00:00:00.
- 1st-2nd Place Times:
- Press Start/Stop/12-24H (A) to Start.
- Press Lap/Reset (B) when the first runner finishes (records 1st place time).
- Press Start/Stop/12-24H (A) when the second runner finishes (records 2nd place time).
- Press Lap/Reset (B) to display the 2nd place time.
- Press Lap/Reset (B) again to Reset to 00:00:00.
Maintenance
Water Resistance
Your watch is rated for 3 Bar (30 meters) water resistance. This means it is suitable for everyday use and can withstand splashes or brief immersion in water. However, it is NOT suitable for swimming, diving, or showering with hot water, as steam and pressure changes can compromise the seals.
Battery Replacement
The watch uses one CR-2016 lithium battery, which provides approximately 7 years of operation under normal conditions (assuming 20 seconds of alarm operation and one second of light operation per day). When the display becomes dim or the light function weakens, it's an indication that the battery needs replacement. Battery replacement should ideally be performed by a qualified watch technician to ensure water resistance is maintained.
Cleaning and Care
- Wipe the watch regularly with a soft, dry cloth to remove dirt and moisture.
- For the stainless steel band, a soft brush with mild soapy water can be used, followed by thorough rinsing and drying.
- Avoid exposing the watch to extreme temperatures, direct sunlight for prolonged periods, or strong magnetic fields.
- Do not use chemical cleaners or solvents, as they may damage the watch's finish or seals.
Image: Back of the watch indicating water resistance and material.
Troubleshooting
- Display shows confusing information: This usually indicates an incorrect entry sequence during setting. Please re-read the relevant section of this manual and try again.
- Light function not working or dim: This is often a sign of a low battery. Consider replacing the battery. If the issue persists after battery replacement, contact customer support.
- Watch not keeping accurate time: The watch has an accuracy of ±30 seconds per month. If it deviates significantly more, a battery replacement might be needed, or the watch may require servicing.
- Water inside the watch: If you notice condensation or water inside the watch, stop using it immediately and have it inspected by a professional to prevent further damage.
Specifications
| Feature | Specification |
|---|---|
| Model Number | A158WA-1D |
| Display Type | Digital |
| Movement | Digital |
| Accuracy | ±30 seconds a month (at normal temperature) |
| Water Resistance Depth | 3 Bar (30 meters) |
| Band Material Type | Stainless steel |
| Case Material | Resin |
| Dial Window Material Type | Resin |
| Case Shape | Rectangle |
| Clasp Type | Hook Buckle |
| Band Length | 22cm |
| Battery Type | CR-2016 Lithium (Battery Included: Yes) |
| Battery Life | Approx. 7 years |
| Display Capacity | Hour, minute, second, am/pm, date, day. Auto-calendar set at 28 days for February. Daily alarm, Hourly time signal. |
| Stopwatch Measuring Unit | 1/100th of a second |
| Stopwatch Measuring Modes | Normal time, net time, split time and 1st-2nd place times |
User Tips
- Strap Comfort: Some users find the original metal strap uncomfortable, especially if they have arm hair. Consider replacing it with a leather or fabric strap for enhanced comfort.
- Backlight Expectation: The LED backlight provides basic illumination for reading the time in low light conditions. It is functional but may not be as bright as modern backlights.
- Watch Size: This model features a classic, compact design. If you prefer a larger watch, you might consider other models.
- Water Resistance: Remember that 3 Bar water resistance is suitable for splashes and rain, but not for swimming, diving, or hot showers.
Warranty & Support
For warranty information, service, or further assistance, please refer to the official Casio website or contact your retailer. Keep your purchase receipt as proof of purchase.
A comprehensive user manual in PDF format is available for download: View User Manual (PDF)