This document provides technical guidance, basic steps, and installation methods for the Xiaomi Outdoor Camera BW500. Illustrations are schematic and for reference only. Product updates and upgrades may result in minor differences from the actual product.
1. Setup and Installation
1.1 Connect the Power
- Insert the power cable into the Type-C power connector located on the back of the camera.
- The camera will automatically power on, indicated by an orange fast-flashing light.
Tip: After powering on, do not forcibly twist the ball head of the camera. If the lens positioning is inaccurate, calibrate it through the Mi Home APP.
1.2 Indicator Light Status
- Blue (always on): Connection successful / Normal status.
- Blue (blinking): Network abnormality.
- Orange (fast flash): Waiting for connection.
- Orange (slow flash): Upgrading.
1.3 Connect to Mi Home APP
The Xiaomi Outdoor Camera BW500 connects and is controlled via the Mi Home APP. Follow these steps:
- Ensure the camera is powered on and the indicator light is orange and fast-flashing (waiting for connection).
- Download and install the Mi Home APP from your app store (search "Mi Home").
- Open the Mi Home APP, log in, and tap the "+" icon in the upper right corner of the home page.
- Scan the QR code provided in the physical manual or search for the device manually.
- Follow the voice prompts to operate and enter the Wi-Fi password to connect.
- Wait for a successful connection, indicated by a solid blue light.
Note: Due to APP updates, actual operations may vary slightly. Ensure a smooth network connection during setup.
Figure 1: Xiaomi Outdoor Camera BW500
1.4 Installing the MicroSD Card
- Ensure the camera is powered off.
- Insert the microSD card into the slot with the contact side facing up.
Note: Always disconnect power before installing or removing the microSD card. Use a microSD card (8GB~256GB) from a reputable manufacturer with a read/write speed of U1/Class10 or higher.
1.5 Mounting the Device
The Xiaomi Outdoor Camera BW500 can be placed on a flat surface (e.g., desk, table) or securely mounted on a wall.
Figure 2: Example of camera and solar panel outdoor mounting
Figure 3: Solar panel and camera wiring example
Figure 4: Solar Panel
2. Operating Instructions
2.1 Real-time View
Access the Xiaomi Smart Camera control interface within the Mi Home APP to:
- View the camera's live monitoring feed.
- Adjust camera sharpness.
- Control horizontal and vertical angles.
- Capture screenshots and record video.
- Make remote calls.
2.2 Infrared Night Vision
The camera automatically switches to night vision mode in low-light conditions. The built-in infrared night vision light provides clear imaging up to 10 meters in the dark, enabling full-color night vision.
Figure 5: 10m Full-Color Night Vision
2.3 History Playback
To access recorded videos:
- This feature requires a compatible microSD card or a cloud storage service subscription.
- In the Mi Home APP, navigate to the camera's control interface and tap "Look Back".
- Drag the timeline to select the desired playback period.
- Supports time-speed fast forward playback.
2.4 Automatic Care (Watchman Assistant)
Enable the watchman assistant function to:
- Detect human figures and movement changes within the camera's view.
- Receive recorded video pushes of these events to the Mi Home APP.
- Customize watchman settings (all-day, daytime, nighttime, or specific schedules and alarm intervals).
Figure 6: AI Smart Protection with Person, Animal, and Vehicle Detection
2.5 Share Video
Share your camera's feed with others:
- In the Mi Home APP, go to the camera's control interface.
- Access the settings menu and select the device sharing option.
- Invite others to view the feed. Shared users must download the Mi Home APP and log in with a Xiaomi account.
2.6 Physical Masking
To protect your privacy when the camera is not needed:
- Tap the "()" icon in the live screen of the Mi Home APP to activate physical masking.
- Alternatively, enable the physical masking switch in Settings > Camera Settings > Physical Masking Settings.
- You can also set a timer for automatic physical masking.
- The camera lens will automatically adjust to be covered by the body shell.
3. Maintenance and Care
- Environmental Conditions: Avoid using the product in excessively humid environments or where it may be exposed to water, as this can affect normal operation.
- Optimal Image Quality: To ensure the best picture quality, avoid placing the camera lens too close to glass, white walls, or other reflective objects. This prevents issues like overly bright foregrounds, dark backgrounds, or whiteouts.
- Power Supply: Always use the original power adapter to prevent malfunctions due to insufficient power supply.
- Cleaning: Gently wipe the camera's exterior with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
4. Troubleshooting
4.1 Common Issues and Solutions
- Camera not connecting to Mi Home APP:
- Ensure the camera is powered on and the indicator light is orange and fast-flashing.
- Verify your network connection is stable and smooth.
- If the indicator light is blue blinking, it indicates a network abnormality. Check your Wi-Fi router.
- If you changed your network or Mi Home APP account, perform a factory reset (see below).
- Inaccurate lens positioning:
- Calibrate the lens through the Mi Home APP.
- Poor Wi-Fi signal or connection drops:
- Ensure the camera is installed within Wi-Fi signal range.
- Place the camera in a location with optimal Wi-Fi signal strength.
- Avoid installing near metal objects or microwave ovens, which can interfere with the signal.
- Camera malfunction:
- Ensure you are using the original power adapter to provide sufficient power.
4.2 Restore Factory Settings
If you change your network or Mi Home APP account, you may need to restore factory settings:
- Press and hold the reset button for approximately 7 seconds.
- The indicator light will flash orange, confirming successful factory reset.
- Reconnect the camera to the Mi Home APP as per section 1.3.
Note: Restoring factory settings will not delete the contents of the microSD card.
5. Specifications
| Feature | Specification |
|---|---|
| Brand Name | XIAOMI |
| Model Number | BW500 (MJSXJ05BY) |
| Origin | Mainland China |
| Certification | CE |
| Communication Method | Other (Wireless) |
| Resolution | 2.5K HD Shooting |
| Night Vision | 10m Full-color Night Vision |
| AI Features | AI Smart Protection (Person, Animal, Vehicle Detection) |
| Waterproof Rating | IP67 |
| Battery Life | Long Battery Life |
| Working Temperature | -10°C to 45°C |
| MicroSD Card Support | 8GB ~ 256GB (U1/Class10 recommended) |
5.1 Package Dimensions
- Length: 30 cm
- Width: 23 cm
- Height: 8 cm
- Weight: 1.247 kg
6. User Tips
- Check Packaging: Upon receiving your camera, inspect the packaging for any damage to ensure all components are intact.
- Network Stability: For seamless operation and connection to the Mi Home APP, ensure your Wi-Fi network is stable and strong, especially during initial setup.
- Mi Home APP Updates: Keep your Mi Home APP updated to the latest version for the best experience, as features and instructions may evolve.
7. Warranty and Support
For detailed warranty information, please refer to the official Xiaomi warranty policy provided with your purchase or on the official Xiaomi website.
For further assistance, technical support, or to view the complete user manual, please refer to the PDF document:
If you encounter issues not covered in this manual, please contact Xiaomi customer support.