Aqara E1

Contents

Aqara Smart Wall Switch E1 User Manual

Model: E1 Series (ZNOBKG38LM, ZNOBKG39LM, ZNOBKG40LM, ZNOBKG41EM)

1. Introduction

The Aqara Smart Wall Switch E1 series (available in single, double, triple, and quadruple key versions) features a versatile design compatible with both single live wire and live-neutral wire setups. This allows you to choose the wiring method that best suits your home's electrical infrastructure.

Utilizing the Zigbee wireless communication protocol, this smart switch enables you to control the power supply to your connected devices. When paired with an Aqara gateway, it unlocks advanced functionalities such as remote control via the Aqara Home App, device automation, and scene linkages. Furthermore, its integration with the Apple HomeKit platform allows for seamless control through the Apple Home App.

Note: This product leverages Zigbee 3.0 functionality. Please be aware that some features may depend on the specific gateway model and its compatibility. For detailed information, refer to the official Aqara support website.

Video: Aqara Smart Wall Switch E1 demonstration, showcasing remote control, voice control, and automation features.

2. Safety Advice & Precautions

Please read all safety instructions carefully before installation and use.

  • Electrical Installation: Installation involves high voltage. It must be performed by qualified professionals in strict accordance with local electrical codes and this product manual.
  • Indoor Use Only: This product is designed exclusively for indoor use. Do not install or operate it in humid environments or outdoors.
  • Moisture Protection: Protect the device from moisture. Do not spill water or any other liquids onto the product.
  • Heat Sources: Do not place the product near any heat sources.
  • No Self-Repair: Do not attempt to repair the product yourself. All repairs should be carried out by authorized service personnel.
  • Handle with Care: Avoid scratching the switch buttons with sharp objects.

3. Setup and Installation

WARNING: Ensure the main power supply to the circuit is turned OFF at the circuit breaker before beginning any installation work to prevent electric shock.

3.1 Physical Installation

  1. Remove Switch Panel: Carefully use a flat-head screwdriver to pry open the front switch panel from the base.
  2. Wiring: Loosen the terminal screws on the switch base.
    • Connect the Live (Line) wire to the terminal marked "L".
    • If your home wiring includes a neutral wire, connect it to the terminal marked "N".
    • Connect the Load (Light) wires to the terminals marked "L1", "L2", "L3", etc., corresponding to the number of gangs on your switch.

    Important: Confirm all wiring is correct and secure before tightening the terminal screws. The total load connected to the switch must not exceed 2200W.

    Wiring diagram for Aqara Smart Wall Switch E1 showing L, N, L1, L2, L3 terminals.

    Image: Detailed product features and benefits, including remote control, voice control, and automation, with a wiring diagram.

  3. Mounting: Use the provided screws to securely fix the switch base into the wall junction box.
  4. Attach Panel: Carefully align and snap the front switch panel back onto the base. Ensure it clicks into place securely.
  5. Power On & Test: Restore power to the circuit at the circuit breaker. Press the switch buttons. If the connected lights can be controlled normally, the installation is successful.

3.2 Smart Home Integration (Aqara Home App)

  1. Gateway Setup: Ensure your Aqara gateway is powered on and added to the Aqara Home App according to its specific instructions.
  2. Add Device: Open the Aqara Home App on your smartphone or tablet. Tap the "+" icon in the top right corner to enter the "Add Device (Accessory)" page.
  3. Select Switch: From the list, select "Smart Wall Switch E1" (choose the correct version: single, double, triple, or quadruple key).
  4. Pairing Mode: Follow the on-screen prompts. To put the switch into pairing mode, quickly press the switch button 5 times. The blue indicator light on the switch will flash, confirming it's in communication mode.
  5. Complete Setup: Follow any remaining instructions in the app to complete the pairing process.

Troubleshooting Tip: If pairing fails, try moving your Aqara gateway closer to the Smart Wall Switch E1 and repeat the pairing steps.

4. Operating Instructions

4.1 Manual Control

Simply press the physical buttons on the switch panel to turn the connected lights or appliances on or off, just like a traditional light switch.

4.2 App Remote Control

Once paired with an Aqara gateway and added to the Aqara Home App, you can control your lights from anywhere using your smartphone or tablet. Open the Aqara Home App, navigate to your switch, and tap the corresponding buttons to toggle your lights.

Woman controlling lights via smartphone app.

Image: Woman controlling lights via smartphone app.

4.3 Voice Control

The Aqara Smart Wall Switch E1 supports voice control through compatible smart assistants (e.g., Apple Siri, Google Assistant, Amazon Alexa) when integrated with their respective platforms via the Aqara gateway. Use commands like "Hey Siri, turn on the living room light".

4.4 Automation and Scenes

Leverage the Aqara Home App to create custom automations and scenes. For example:

  • Motion-Activated Lighting: Pair with an Aqara Motion Sensor to automatically turn on lights when motion is detected in a room.
  • Time-Based Control: Schedule lights to turn on or off at specific times of the day.
  • Away Mode: Create a scene that turns off all lights when you leave home.
Woman in bed, lights up when motion is detected.

Image: Woman in bed, lights up when motion is detected.

4.5 Anti-Flicker and Fast Mode

The E1 switch offers configurable modes to enhance performance:

  • Anti-Flicker Mode: Can be enabled to resolve flickering issues with certain types of connected lamps, especially low-power LEDs.
  • Fast Mode: After setup, this mode can make the device more responsive to commands.
Diagram showing Anti-flicker mode and Fast Mode features.

Image: Diagram showing "Anti-flicker mode" and "Fast Mode" features.

5. Maintenance

  • Cleaning: To clean the switch, gently wipe the surface with a soft, dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
  • Avoid Liquids: Do not spray cleaners directly onto the switch. Always apply cleaner to the cloth first.
  • Regular Checks: Periodically check the switch for any signs of damage or loose connections. If any issues are found, consult a qualified electrician.

6. Troubleshooting

If you encounter any issues with your Aqara Smart Wall Switch E1, please refer to the following common problems and solutions:

ProblemPossible Cause / Solution
Indicator Light FailureCheck power supply to the switch. Ensure the switch is correctly wired. If power is present and wiring is correct, the unit may require service.
Button FailureEnsure the switch panel is properly seated. If physical buttons are unresponsive, the unit may require service.
Zigbee Connection Failure
  • Ensure the Aqara gateway is powered on and within range.
  • Move the gateway closer to the switch.
  • Re-pair the switch with the gateway (refer to Section 3.2).
  • Check for Wi-Fi interference if your gateway uses Wi-Fi.
Switch Control Function Failure
  • Verify the load (light/appliance) is working and not faulty.
  • Check wiring connections (L, N, L1, etc.) are secure.
  • Ensure the total load does not exceed 2200W.
  • If using single live wire, ensure minimum load of 3W is met.

If the problem persists after trying these solutions, please contact customer support.

7. Specifications

FeatureDetails
Product ModelsZNOBKG38LM (Single Key), ZNOBKG39LM (Double Key), ZNOBKG40LM (Three Key), ZNOBKG41EM (Four Key)
Dimensions86 x 86 x 33.5mm
Wireless ConnectivityZigbee 3.0
Rated Parameters220V~50Hz
Number of Channels1 (Single), 2 (Double), 3 (Three), 4 (Four)
Rated LoadIncandescent lamp: ≤ 2200W (total)
Energy-saving lamp, LED lamp, Fluorescent lamp: ≤ 400W (total)
Minimum LoadMin 3W (single live wire setup)
Unlimited (live and neutral wire setup)
Load Type CompatibilityIncandescent lamps, Energy-saving lamps, LED lamps, Fluorescent lamps
Operating Temperature-10°C to 40°C (14°F to 104°F)
Operating Humidity5% to 95% RH, non-condensing
Executive StandardsGB/T 16915.1-2014, GB/T 16915.2-2012

8. User Tips

  • Compatibility: Users have reported excellent compatibility with Zigbee2MQTT, with all functions displaying correctly.
  • Tactile Feel: The switch offers a superior tactile feel when pressed, attributed to its rubber pads compared to plastic plungers found in some other brands.
  • Installation Note (Size): Be aware that the Aqara Smart Wall Switch E1 is physically larger than some standard switches. If you have a typical 60mm square recessed wall box, you might need to modify (e.g., break a side or cut a little) the box to ensure a proper fit without forcing the switch. The depth is generally not an issue, but the perimeter size is larger.

9. Warranty & Support

9.1 Warranty Policy

Aqara products are covered by a "Three Guarantees" service, adhering to consumer protection laws. Warranty services (return, replacement, repair) require a valid invoice.

  • Return: Within 7 days from the date of receipt for product quality issues.
  • Replacement: Within 15 days from the date of receipt for product quality issues.
  • Repair: Within 1 year from the date of receipt for product quality issues.

9.2 Non-Warranty Conditions

The warranty does not cover:

  • Damage from unauthorized repairs, misuse, collision, negligence, abuse, liquid ingress, accidents, alterations, or incorrect use of non-original accessories.
  • Torn or altered labels, or anti-counterfeit marks.
  • Damage caused by force majeure (e.g., natural disasters).
  • Issues not listed as performance failures in the product documentation.
  • Damage caused by human factors.

9.3 Customer Support

For technical assistance, warranty claims, or further inquiries, please contact Aqara customer support:

Service Hotline: 400-990-7930

For more information and support resources, visit the official Aqara website.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.