EARUELETRIC PC321-TY

Contents

Tuya Smart Life 3-Phase WiFi Energy KWH Meter User Manual

Model: PC321-TY

Brand: EARUELETRIC

1. Introduction

The PC321-TY Power Clamp is designed to help you monitor the amount of electricity usage in your facility by connecting the clamp onto the power cable. It can also measure Voltage, Current, Power Factor, and Active Power. This guide provides an overview of the product and assists with initial setup and installation.

Features:

  • Tuya compliant
  • Supports Tap-to-Run and automation with other Tuya devices
  • Single/3-phase electricity compatible
  • Three current transformers for Single phase application
  • Measures real-time Voltage, Current, Power Factor, Active Power, and total energy consumption
  • Displays the current temperature of the device on the App
  • Suitable for both residential and commercial applications
  • Lightweight and easy to install

2. Safety Handling

WARNING: Failure to follow these safety notices could result in fire, electric shock, other injuries, or damage to the Power Clamp and other property. Read all the safety notices below before using the Power Clamp.

  • Avoid high humidity or extreme temperatures.
  • Avoid long exposure to direct sunlight or strong ultraviolet light.
  • Do not drop or expose the unit to intense vibration.
  • Do not disassemble or try to repair the unit on your own.
  • Do not expose the unit or its accessories to flammable liquids, gases or other explosives.

3. Product Overview

Device Components

Diagram of the PC321-TY Power Clamp showing LED indicator, CT1, CT2, CT3, AC Input cable, and Clamp.
The image displays the main unit with its LED indicator, three Current Transformer (CT) cables labeled CT1, CT2, CT3, and the AC input cable connected to a clamp.

Reset Button

Close-up of the PC321-TY Power Clamp showing the reset button.
Location of the reset button on the device.

Press and hold the reset button for 5 seconds until the LED indicator flashes 3 times quickly to restore the power clamp to default factory settings (energy data will be cleared). It will then enter EZ mode for 3 minutes.

LED Indicator Status

LED Status What it means
Green LED (Rapidly blink) EZ pair mode
Green LED (Slowly blink) AP pair mode
Green LED solid on Device has connected with router.
No light Device cannot connect with router.

4. Technical Specifications

Wireless Connectivity
Wi-Fi 802.11 B/G/N20/N40
RF Characteristics Operating frequency: 2.4GHz
Physical Specifications
Operating Voltage 100~240 Vac 50/60 Hz
Calibrated Metering Accuracy ≤ 100W (Within ±2W)
>100W (Within ±2%)
CT Provided CT 80A (default)
CT 120A/200A/300A (optional)
Operating environment Temperature: -20 ℃ - +55 ℃
Humidity: ≤ 90% non-condensing
Dimension 86(L) x 86(W) x 37(H) mm

5. Installation

Important Safety Information

  • The power clamp must be installed and serviced only by a qualified electrical personnel.
  • Do not touch the terminals of the device during testing.
  • Turn off all the power supply for this equipment before installing.
  • Make sure that the power supply is off before connecting or disconnecting it to an auxiliary device.
  • Always use a properly rated voltage sensing device to confirm power is off.
  • Replace all devices, doors and covers before applying power to the equipment.

Failure to follow these instructions will result in death or serious injury.

Wiring Diagrams

Please make sure the main power in your facility is off before installing. Follow the schematics below as an example to wire the Power Clamp for different phases.

3-Phase electricity wiring diagram for the PC321-TY Power Clamp.
Detailed wiring diagram for a 3-phase electricity setup, showing connections to circuit breakers and loads (L1, L2, L3, N).
Single Phase electricity wiring diagram for the PC321-TY Power Clamp.
Detailed wiring diagram for a single-phase electricity setup, showing connections to circuit breakers and loads (L, N).

Installation Steps

Watch the video below for a visual guide on the installation process.

Video demonstrating the wiring and installation process for the energy meter.

  1. Connect the AC Input cable to a socket near the Electrical Box to power on the Power Clamp according to the corresponding phase wiring diagram.
  2. Attach both ends of the Current Transformer Cables first like the picture shown below. Then spin the waterproof latch clockwise until both ends have been tightened and secured.
  3. Image showing how to connect the Current Transformer cables.
    Connecting the Current Transformer (CT) cables to the main unit.
  4. Open the clamp as shown below. Apply it on the electric meter cable. The arrow on the clamp should face the correct direction of the electricity current flows (P1→P2). If the arrow faces the reverse direction, the reading meter will display 0.
  5. Image showing the correct direction for installing the current clamp.
    Ensure the arrow on the clamp points towards the load (P1 to P2) for correct measurement.

Mounting

The Power Clamp has a mounting bracket for mounting purposes:

  1. Use the mounting bracket as a template to mark the two holes on the wall for installing screws.
  2. Screw the mounting bracket onto the wall according to the marked location. Install wall plugs if necessary.
  3. Locate the hooks of the mounting bracket and line up the hooks with the mounting holes on the Power Clamp. Fit the hooks into the mounting holes as shown in the picture below. Installation is now completed.
Diagram showing how to mount the power clamp using its bracket.
Mounting the device using the provided bracket.

6. Network Configuration

Initial Setup

  • Connect your phone to a 2.4Ghz Wi-Fi network.
  • A mobile phone with a 'SmartLife' APP installed.

Then follow the steps below:

  1. Power on the power clamp.
  2. Make sure the LED indicator is flashing green. If not, please reset it.

Add Devices

  1. Open your App.
  2. Login with an existing account. If you are a new user, you need to create an account first.
  3. Please click the '+' button at the top right corner of the App to add devices.
  4. Select 'Switch Module' to manually add the Power Clamp in the 'Energy' list.
Screenshot of the SmartLife app showing device categories and the 'Energy' section.
SmartLife App interface for adding devices, highlighting the 'Energy' category.
  1. Enter your home Wi-Fi account and password (Only supports 2.4Ghz Wi-Fi), then tap "Next" button.

Connection Process

  1. Place the router, mobile phone, and Power Clamp as close as possible to wait for connection. Confirm the green indicator on your device is rapidly blinking, then tap 'Next'.
Screenshot of the SmartLife app showing Wi-Fi connection steps.
SmartLife App interface for confirming indicator status and proceeding with connection.
  1. After the connection succeeds, you can rename the device and click "Done" to complete.

AP Mode Configuration (Alternative)

If EZ pair mode fails, you can try AP mode:

  1. Reset the device in EZ pair mode; it will switch to AP mode. The indicator on your device will blink slowly.
  2. Then switch the network configuration mode to AP mode at the upper right corner of the APP when you add the device.
  3. Place the router, mobile phone, and Power Clamp as close as possible. Confirm the indicator on your device is slowly blinking, then tap 'Next' to wait for connection.
  4. Find and connect the device's hotspot in the Wi-Fi list on your phone.
Screenshot of the SmartLife app showing AP Mode selection and Wi-Fi list.
SmartLife App interface for selecting AP Mode and connecting to the device's hotspot.

7. Operating Instructions

Once connected, you can monitor various electrical parameters in real-time through the Tuya Smart Life App. The app provides daily, weekly, and monthly consumption and production data with charts. You can view how much electricity is being consumed, produced, and any excess energy being fed back to the grid.

Screenshot of the SmartLife app showing energy monitoring data.
SmartLife App interface displaying total energy consumed, energy produced, and phase-specific data.

8. Maintenance

To ensure the longevity and accurate operation of your Power Clamp, follow these general maintenance guidelines:

  • Keep the device clean and free from dust. Use a soft, dry cloth for cleaning.
  • Avoid exposing the device to high humidity, extreme temperatures, or direct sunlight.
  • Do not use harsh chemicals or abrasive cleaners on the device.
  • Regularly check all cable connections to ensure they are secure.

9. Troubleshooting

Device Not Powering On

If the LED indicator does not flash red 3 times when you press the reset button, the device may not be powered on. Check the AC input cable connection.

Wi-Fi Configuration Failed

  • Confirm the entered router password is correct.
  • Ensure that the DHCP service is enabled for the router. If not, the IP address will be occupied.
  • Please confirm the Wi-Fi network is stable: Place the phone beside your device and make sure they are in the same network environment. Try to open a website to judge if the network can be used.
  • If your router supports both 2.4Ghz and 5Ghz, please enable the 2.4Ghz channel and add the device under the 2.4G Wi-Fi channel.
  • Confirm that both the location permission of the phone system and the App are enabled.

Device Offline

  • Confirm whether the Power Clamp is powered on.
  • Please confirm whether the home Wi-Fi network is normal, or whether the Wi-Fi name and password have been modified.
  • If there are still problems after the above checking, it is recommended to remove the device or change the router to add it again.

General Connection Issues

If you have already upgraded your iOS system to 14 or later, you need to enable the 'Local network' permission for the Smart Life App. If issues persist, consider changing your router or trying the AP mode configuration.

10. User Tips

  • Users find the installation practical and the application easy to use.
  • The device is generally considered ideal in size for its function.
  • The power factor is typically monitored, not changed, by this device.
  • Connection to the device is primarily through the mobile application; a web interface is not typically available.

11. Warranty and Support

For any technical support, warranty claims, or service inquiries, please contact the seller or manufacturer directly. Ensure you have your purchase details and product model number available when seeking assistance.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.