1. Introduction
Thank you for purchasing the NAMSTE Portable Smart Diffuser. This device is designed to atomize essential oils evenly, dispersing fragrance throughout your space with smart Bluetooth control and a photosensitive night light function. Please read this manual carefully before use and keep it for future reference.
We provide a 12-month warranty for qualified machines from the date of purchase.
2. Safety Instructions
- Always ensure the machine is upright to prevent leakage, which may damage the device and its parts.
- Do not use a broken power wire. Ensure the power supply is suitable for the machine to prevent fire hazards.
- Do not attempt to open or repair the machine yourself. If problems arise, please contact us promptly.
- Keep out of reach of children and pets.
- Use only recommended essential oils.
3. Package Contents
Please check the box for the following items:
- Scent Diffuser x1
- Plug x1 (specific to region)
- Oil Bottle x1
- Foam Pads x1
- User Manual x1
4. Product Overview
The NAMSTE Smart Diffuser features a compact design with intuitive controls and smart functionalities.
4.1. Indicator Lights & Buttons
The device features a Mode button, Time button, Night light, Sensor, and Bluetooth indicator.
Mode Indicator (Top LED)
- Off: Shutdown state.
- Green: Fixed mode 1 (pause 180s, work 15s).
- Yellow: Fixed mode 2 (pause 120s, work 15s).
- Red: Fixed mode 3 (pause 60s, work 15s).
- Blue: Bluetooth mode (works according to APP settings).
Time Level Indicator (Bottom LED)
- Off: Aligns with APP settings or shutdown.
- Green: Timed for 1 hour shutdown (fixed mode).
- Blue: Timed for 2 hours shutdown (fixed mode).
- Yellow: Timed for 4 hours shutdown (fixed mode).
- Red: Timed for 8 hours shutdown (fixed mode).
Night Light
- On: Light turns on when ambient brightness is below a threshold.
- Off: Light turns off when ambient brightness is above a threshold.
Bluetooth Indicator (Blue LED)
- Off: Bluetooth not connected. Buzzer rings twice when connection is disconnected.
- On: Bluetooth connected. Buzzer rings twice when successfully connected.
- Flashes twice: When APP update configuration information is received, the buzzer rings twice.
5. Setup
5.1. Filling Essential Oil
- Take out the atomizer head and essential oil bottle.
- Rotate the oil bottle out in a clockwise direction.
- Fill the oil bottle with your desired essential oil.
- Rotate the bottle back in an anti-clockwise direction to secure it.
5.2. Installing the Diffuser
- Align the power plug bump with the device notch and press it tightly.
- Rotate clockwise into the device.
- Attach a foam pad under the plug (if needed for stability).
- Select a suitable wall socket to insert the device.
- To replace the national standard plug, press the button indicated by the arrow on the diagram, and simultaneously rotate counterclockwise to remove the plug. Replace with the appropriate plug for your region.
5.3. Bluetooth App Setup
- Scan the QR code in the manual (or search for "Scent Tech" in your app store) to download and install the APP.
- Start the APP and complete the beginner's guide.
- Select "Bluetooth mode" to enter the home page.
- The APP will display available Bluetooth devices within range. Click to select your device to enter the status page.
Tip:
- Ensure APP permissions are configured correctly, including location services, Bluetooth connection, and notification sending.
6. Operation
6.1. Manual Control
Mode Button
- Short press: Switches the mode level (Green, Yellow, Red). The buzzer will make a short sound.
- Press and hold for 2 seconds: Turns the device on/off. The buzzer will make a long sound.
Time Level Button
- Short press (fixed mode): Switches the time level (Green, Blue, Yellow, Red). The buzzer sounds shortly. The timer resets after switching, and the device will automatically shut down once the set time is reached.
- Short press (APP mode): This button is not functional, and the corresponding indicator light is off.
- Press and hold for 2 seconds: Turns the night light on/off. The buzzer will make a long sound.
6.2. Smart Bluetooth Control (via APP)
Once connected via Bluetooth, the diffuser will operate according to the parameters configured in the APP. It immediately switches from fixed mode to Bluetooth mode upon connection. To return to fixed mode, you need to manually switch by pressing the Mode button.
Video 1: Demonstration of the NAMSTE Smart Diffuser's features, including plug-in installation, Bluetooth app control, essential oil refill, and photosensitive night light.
Status Page
The APP's status window displays the current working mode parameters and status, including time, day, and Bluetooth connection status (gray when Bluetooth is not connected).
- Operation status: The mobile phone can turn the device operation on/off with one button.
- Working Mode: Displays the currently running working mode.
- Device Address: After successful network configuration, the network location address is obtained.
- Click "More" in the top right corner to rename the device.
Mode Settings
Click the working mode bar to enter the mode setting. You can set 5 groups of working modes, customizing the day, timing power on/off period, and gear setting.
- Week settings: Customize the work days of the week.
- Time period number: Customize the time period for scenting. Note: It cannot be set across days (end time cannot be less than start time). For example, to set work from 23:00-02:00, set two groups: 23:00-23:59 and 00:00-02:00.
- Working level setting: Adjust the spatial fragrance concentration by controlling the frequency of fragrance spraying.
6.3. Tilting Alarm Function
When the device is powered on, the buzzer will ring if the device tilts more than 45 degrees.
7. Maintenance
If the diffuser is not used for a long time, or at least every 1-2 months, it should be cleaned to ensure optimal performance.
7.1. Cleaning Procedure
- Add 95% industrial alcohol into the empty essential oil bottle.
- Turn on the diffuser and let it run for 10-15 minutes.
- Turn off the diffuser and pour out the alcohol.
- Screw the bottle back into the machine.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Diffuser not spraying fragrance. | Oil bottle empty or clogged nozzle. | Refill essential oil or perform maintenance cleaning with industrial alcohol. |
| Device not turning on. | No power, loose connection, or device off. | Check power outlet, ensure plug is secure, press and hold Mode button for 2 seconds to turn on. |
| Bluetooth not connecting. | Bluetooth is off on phone/device, APP permissions not granted, or device out of range. | Ensure Bluetooth is enabled, grant necessary APP permissions, move closer to the diffuser. |
| UK plug appears upside down. | Incorrect plug orientation or design. | The plug is designed to be rotatable. Ensure it is rotated and securely attached in the correct orientation for your socket. Refer to section 5.2 for plug replacement instructions. |
| Buzzer rings continuously. | Device tilted more than 45 degrees. | Ensure the device is installed upright and stable. |
9. Specifications
| Feature | Detail |
|---|---|
| Model | 021 (GAH-04P) |
| Dimensions | 66 x 116 x 190 mm |
| Weight | 0.35 Kg |
| Voltage | AC 100-240V |
| Power | 1.5W |
| Capacity | 100ml |
| Coverage | 100-300 m³ |
| Noise Level | ≤32dB |
| Material | ABS |
| Color | White, Black |
| Mode of Operation | Bluetooth |
| Installation Method | Socket type |
| Plug Specifications | US, EU, UK (interchangeable) |
| Certification | CE |
10. User Tips
- For optimal fragrance dispersion, place the diffuser in a central location within the desired coverage area.
- Experiment with different essential oil concentrations via the app settings to find your preferred intensity.
- If you experience issues with the plug fitting, ensure you have selected the correct regional plug and that it is securely attached and rotated into place.
11. Warranty & Support
11.1. Warranty Policy
The warranty is valid for new machines and covers a period of 12 months from the purchase date. During this period, we offer repair services and free parts (excluding essential oil).
To claim warranty service, the warranty card and purchase invoice are required.
11.2. Exclusions from Free Warranty Service
The following conditions are not covered under free warranty:
- Damage or problems caused by accidents or fire.
- Improper use or wrong operation.
- Repairs by unauthorized personnel causing damage.
- Damage during transportation.
- Absence of a valid warranty card.
- Failure to perform proper cleaning for a long time.
- The machine's work time has expired.
- Machines & parts not supplied by us.
- Machines not purchased from official sales channels.
- Sending machines back without manufacturer's permission.
11.3. Support
If you encounter any problems or have questions not covered in this manual, please contact our customer support team promptly for assistance.