1. Introduction
The T&G TG166 is a portable Bluetooth speaker designed for wireless audio playback from various devices. Featuring Bluetooth 5.0 connectivity, a built-in microphone for hands-free calls, and support for TF card and USB drive playback, it offers versatile audio options in a compact, waterproof design.
2. Product Features
- Advanced wireless chip and circuit design for stable connectivity.
- Bluetooth 5.0 for efficient wireless pairing.
- Built-in FM radio function with automatic station search.
- High-fidelity speaker for clear and bright sound.
- Supports Micro SD card and USB drive for MP3 audio playback.
- Hands-free calling with built-in microphone (HSP/HFP profile).
- True Wireless Stereo (TWS) function for connecting two speakers.
- Waterproof design for outdoor use.
- Automatic shutdown after 30 minutes of wireless disconnection to save power.
3. Specifications
| Feature | Specification |
|---|---|
| Wireless Version | Bluetooth 5.0 |
| Supported Profiles | L2CAP/A2DP/AVRCP, HSP/HFP |
| Working Distance | Up to 10 meters |
| Signal-to-Noise Ratio (SNR) | ≥90dB |
| Battery Capacity | 500mAh (3.7V) |
| Normal Playback Time | Approx. 2 hours |
| Speaker Driver | Φ45mm * 1 |
| Power Output | 4Ω/5W * 1 |
| Frequency Response | 120Hz-20KHz |
| Unit Dimensions (L x W x H) | 86.5 x 72.3 x 31.6 mm |
| Unit Weight | Approx. 172g |
| Charging Voltage/Current | 5V/500mA |
| Charging Time | 2-3 hours |
| Input/Output | USB |
| Max. Connectable Devices | 2 (via TWS) |
| Total Harmonic Distortion | 2% |
| Impedance | 4-6 Ohm |
| Voice Control | Yes |
| Built-in Microphone | Yes |
| Power Source | Battery, DC |
| Certification | CE |
4. Package Contents
Please check the box for the following items:
- TG166 Portable Bluetooth Speaker
- Micro USB V8 Charging Cable
- User Manual (this document)
5. Controls and Indicators
Key and Slot Functions:
- DC 5V Slot (Micro USB V8): Used for charging the speaker with the provided Micro USB cable.
- TF Slot: Insert a Micro SD (TF) card to play MP3 format audio.
- USB Slot: Insert a USB drive to play MP3 format audio.
- ON/OFF Switch: Slide to 'ON' to power on, slide to 'OFF' to power off.
- 'M' Button (Mode): Short press to switch between modes (Bluetooth, TF card, USB, FM).
- '-' Button (Volume Down / Previous Track): Short press for previous song, long press to decrease volume.
- '+' Button (Volume Up / Next Track): Short press for next song, long press to increase volume.
- Play/Pause Button: Short press to play or pause music. In FM mode, short press to automatically search for stations; press again to stop searching.
6. Setup and Operation
6.1. Charging the Speaker
- Connect the Micro USB V8 charging cable to the DC 5V slot on the speaker.
- Connect the other end of the cable to a USB power source (e.g., computer USB port, USB wall adapter).
- The charging indicator light will illuminate. The speaker is fully charged when the light changes or turns off (refer to specific indicator behavior if available, otherwise assume standard).
- Charging time is approximately 2-3 hours.
6.2. Power On/Off
- Power On: Slide the ON/OFF switch to the 'ON' position. You will hear a power-on prompt.
- Power Off: Slide the ON/OFF switch to the 'OFF' position. You will hear a power-off prompt.
6.3. Bluetooth Pairing
- Ensure the speaker is powered on and in Bluetooth mode (it will usually default to Bluetooth mode or you can press the 'M' button to switch). The speaker will enter pairing mode, indicated by a flashing LED light.
- On your mobile phone or other Bluetooth device, enable Bluetooth and search for available devices.
- Select "TG166" from the list of devices.
- Once paired, the speaker will emit a confirmation tone, and the LED light will stop flashing.
- The speaker will automatically connect to the last paired device when powered on, if within range.
6.4. TWS (True Wireless Stereo) Function
The TWS function allows you to connect two TG166 speakers together for a stereo audio experience, with a combined power output of 10W.
- Ensure both TG166 speakers are powered on and in Bluetooth mode, but NOT paired to any mobile device.
- On one of the speakers, long press the 'M' button for 2-3 seconds. You will hear a hint tone.
- The two speakers will automatically connect to each other. The LED light on one speaker will stop flashing (indicating it's the master), while the other may continue to flash or change state (indicating it's the slave).
- Once TWS is successfully connected, you can then pair your mobile device to the master speaker via Bluetooth as described in section 6.3. Audio will now play in stereo through both speakers.
6.5. Music Playback (Bluetooth/TF/USB)
- Bluetooth Mode: After successful pairing, play music from your connected device. Use the speaker's Play/Pause, Next/Previous Track, and Volume buttons to control playback.
- TF Card/USB Drive Mode: Insert a TF card or USB drive containing MP3 audio files into the respective slot. The speaker will automatically switch to the correct mode and begin playing music. Use the speaker's Play/Pause, Next/Previous Track, and Volume buttons to control playback.
6.6. FM Radio Operation
- Power on the speaker and press the 'M' button to switch to FM radio mode.
- Note: For better FM reception, connect the Micro USB charging cable to the DC 5V slot; it acts as an antenna.
- Short press the Play/Pause button to initiate an automatic search for FM stations. The speaker will scan and save available stations.
- Once scanning is complete, use the Next/Previous Track buttons to navigate through the saved stations.
6.7. Call Handling
When the speaker is connected to your phone via Bluetooth:
- Answer Call: Short press the Play/Pause button when an incoming call rings.
- End Call: Short press the Play/Pause button during a call.
- Redial Last Number: Double-press the Play/Pause button.
7. Maintenance
- Clean the speaker with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Avoid exposing the speaker to extreme temperatures, direct sunlight, or high humidity.
- Keep the speaker away from sharp objects to prevent scratches.
- If the speaker will not be used for an extended period, charge it fully and store it in a cool, dry place.
8. Troubleshooting
- Speaker does not turn on: Ensure the battery is charged. Connect the charging cable and try again.
- Cannot pair via Bluetooth: Make sure the speaker is in Bluetooth pairing mode (flashing LED). Ensure Bluetooth is enabled on your device and it's within 10 meters of the speaker. If previously paired, try unpairing and re-pairing.
- No sound: Check the volume level on both the speaker and your connected device. Ensure the speaker is in the correct mode (Bluetooth, TF, USB, FM).
- Poor FM reception: Connect the Micro USB charging cable to the speaker; it acts as an external antenna. Try repositioning the speaker.
- TWS pairing fails: Ensure both speakers are not connected to any other Bluetooth device before attempting TWS pairing. Try powering both speakers off and on again.
9. User Tips
- For optimal sound quality, ensure the speaker is placed on a stable surface.
- When using the FM radio, connecting the charging cable can significantly improve signal strength.
- Remember that the speaker will automatically power off after 30 minutes of inactivity in wireless mode, which helps conserve battery life.
10. Warranty and Support
For warranty information and technical support, please refer to the documentation provided at the time of purchase or contact the retailer/manufacturer directly. Keep your proof of purchase for any warranty claims.
A detailed user manual in PDF format is also available for download: TG166 User Manual (PDF)