COOSPO CS500

Contents
COOSPO Logo

COOSPO CS500 GPS Cycling Computer User Manual

Model: CS500

Introduction

The COOSPO CS500 is a GPS cycling computer designed to enhance your riding experience with precise data tracking and navigation capabilities. Featuring a built-in UBLOX chip set and support for 5 satellite positioning systems (GPS+BDS+GLONASS+GALILEO+QZSS), it offers improved GPS lock speed and accuracy. The device supports wireless connection to various sensors via Bluetooth and ANT+, including heart rate sensors, speed and cadence sensors, power meters, smart trainers, electronic shifters, and radar lights.

This manual provides detailed instructions for setting up, operating, and maintaining your CS500 cycling computer, ensuring you get the most out of its features.

Video: COOSPO CS500 Product Overview. This video demonstrates the key features and usage scenarios of the CS500 cycling computer, including its interactive interface, data display, and navigation capabilities.

Setup

Product Accessories

Before you begin, ensure all accessories are present in the package:

  • COOSPO CS500 GPS Cycling Computer
  • USB Charging Cable
  • Bike Mount (Standard and Out-front options)
  • Rubber Bands for Mount Installation
  • Lanyard
  • User Manual (Printed)
COOSPO CS500 Product Accessories

Image: Contents of the COOSPO CS500 package, including the device, charging cable, various mounts, and documentation.

Charging the Device

For the first time use, please fully charge the device. The CS500 features a Super Long Battery Life of up to 45 hours.

  1. Connect the USB charging cable to the Type-C port on the back of the CS500.
  2. Connect the other end of the USB cable to a DC 5V power adapter or a computer's USB port.
  3. The device will indicate charging status on its screen.
COOSPO CS500 Battery Life

Image: The COOSPO CS500 device highlighting its 45-hour battery life.

How to Install the Bike Mount

Follow these steps to securely install the CS500 on your bicycle handlebars:

  1. Place the mount base on your handlebar.
  2. Secure the mount base using the provided rubber bands.
  3. Align the CS500 with the mount, then twist it clockwise until it locks into place.
COOSPO CS500 Mount Installation Diagram

Image: Step-by-step diagram illustrating how to install the COOSPO CS500 bike computer onto the handlebar mount.

Initial Settings (Language Selection)

Upon first power-on, you will be prompted to select your preferred language.

  1. Use the navigation buttons to select your language from the list.
  2. Confirm your selection.
  3. The device will then proceed to the main Homepage.

To change the language later, navigate to: Home > Settings > System > Language.

Connecting to CoospoRide App

The CoospoRide app allows for advanced settings, data synchronization, and firmware updates.

  1. Do NOT pair the bike computer directly via your phone's Bluetooth settings.
  2. Download the CoospoRide APP from the Apple App Store or Google Play.
  3. Enable Bluetooth and location permissions for the CoospoRide app on your phone.
  4. Open the CoospoRide APP, go to Bike Computer, select your CS500 model, and click on its device ID to connect.

Important: Ensure Bluetooth and location permissions are enabled for the app. Some phone models may require explicit authorization for Bluetooth device searching.

Add Sensor Management

The CS500 can pair with Bluetooth or ANT+ sensors to collect additional data.

Adding Sensors via Bike Computer:

  1. Go to Settings > Sensors > Add Sensor, or from the Status Page, navigate to Sensors > Add Sensor.
  2. Use the navigation buttons to select the sensor type (e.g., Heart Rate, Speed, Cadence, Power).
  3. Press the confirmation button to start searching for available sensors.
  4. Select the desired sensor ID from the list and confirm to add it.

Note: After adding speed or power sensors, ensure you set the wheel circumference or calibrate the power meter in the connected sensors settings for accurate data.

COOSPO CS500 Wireless Sensor Connection

Image: Diagram showing the COOSPO CS500 connecting wirelessly to various sensors (Heart Rate, Speed, Cadence, Power) via Bluetooth and ANT+.

Adding Sensors via CoospoRide App:

  1. Open the CoospoRide APP.
  2. Go to Device > Add Sensor.
  3. Search for the sensor you wish to add.
  4. Choose the device ID to add the sensor.

Operating Instructions

Button Functions

The CS500 features several buttons for navigation and control:

Button Function
Left Button (Top) Power on/off: Short Press - On, Long Press - Off
Back: Short Press
Right Button (Top) Menu/Confirm
Up/Down Buttons (Side) Select (Scroll through options)
Left Button (Bottom) Homepage shortcut to history; Lap function
Right Button (Bottom) Homepage shortcut to ride (Start/Pause/Stop)

Start a Ride

GPS Positioning:

  1. For initial satellite positioning, wait 30-90 seconds in an open outdoor area. The device's date and time will set automatically upon successful positioning.
  2. Ensure the bike computer remains stationary during GPS signal acquisition for optimal reception.

Starting a Ride:

  1. From the homepage, use the navigation buttons to select Cycling, then press the confirmation button to enter the cycling page.
  2. Press the ride button (bottom right) to start recording your ride.
  3. Alternatively, from any page, press the ride button (bottom right) to directly enter the cycling page and start a ride.

Changing Data Pages During a Ride:

  • While on the cycling page, use the Up/Down buttons to cycle through different data pages.
COOSPO CS500 Indoor Training Mode Display

Image: The COOSPO CS500 displaying data fields for indoor training mode, including power, speed, and cadence.

Status Page

During a ride, press the confirmation button (top right) to access the Status Page. Here you can view current device status, sensor connections, and adjust settings. Press the confirmation button again to return to the cycling page.

The Status Page displays:

  • GPS Status: On/Off, Signal Intensity
  • Battery Level
  • Ride Status: Start, Stop, Auto-Pause, Indoor, Outdoor
  • Sensor Status: Icons for Heart Rate, Speed, Cadence, Power, Bike Trainer, Shifting, Di2, Radar Sensor. Icons are displayed if connected, flashing if added but not connected, and not displayed if not added.
  • Brightness: Adjust backlight level or set to Auto (adjusts based on ambient light).
  • Temperature: May differ from actual ambient temperature.
  • Elevation: Factory calibrated, with default auto-calibration when GPS is turned on.

Pages & Fields Customization

You can customize the layout, data formatting, and specific data types displayed on your device. These settings can also be managed via the CoospoRide APP.

  • To customize, navigate to Settings > Page Setting.
  • After making changes, press the back button to return to the cycling page and see the updated layout.

Lap Function

During a ride, press the bottom left button to record a new lap. This function is useful for analyzing and comparing performance across different segments of your ride. You can also set up automatic segmentation rules (e.g., by distance or time) in the device settings.

Pause & Save a Ride

The CS500 offers automatic and manual control over ride recording:

  • If Auto Pause is enabled (in Auto Settings), the ride recording will pause automatically when your speed drops below a set value.
  • To manually pause a ride, press the ride button (bottom right). Press it again to resume.
  • To save an activity, navigate to the Cycling Menu and select Save.

Check Data (History & Sync)

Viewing History on Device:

  • From the home page, press the bottom left button to access History.
  • Alternatively, go to Home > Settings > History > History Data to review saved ride data.

Synchronizing Data to App:

  • After connecting your CS500 to the CoospoRide APP, your ride data will be automatically synchronized to the app.

Maintenance

General Care

  • Clean the device regularly with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners.
  • Ensure the charging port cover is securely closed when not charging to maintain its IPX7 waterproof rating.
  • Store the device in a cool, dry place when not in use.

Battery Management

  • Charge the device fully before long rides or extended storage.
  • The device has a Battery Saver Mode (in Power Manage settings) to adjust GPS mode and backlight brightness for lower power consumption.
  • The Auto Sleep feature will put the device into sleep mode after 5 minutes of inactivity.

Troubleshooting

Common Issues and Solutions

  • GPS Signal Acquisition: Ensure you are in an open outdoor area and the device is stationary during initial positioning.
  • Sensor Connection Issues: Double-check that sensors are powered on and within range. Verify Bluetooth/ANT+ settings on the CS500 and in the CoospoRide app. Remember not to pair sensors directly via phone's Bluetooth.
  • Data Synchronization Problems: Ensure the CS500 is connected to the CoospoRide app and your phone has an active internet connection.
  • Inaccurate Data: For speed/power sensors, confirm that wheel circumference is correctly set or power meter is calibrated. For elevation, consider manual calibration if needed.

Device Updates

Regularly check for and install firmware updates to ensure optimal performance and access to new features.

  1. Open the CoospoRide APP.
  2. Go to Device > Connected Device > Firmware Update.
  3. Click on Check for Updates and follow the on-screen guidelines.

Factory Reset

If you encounter persistent issues, a factory reset can resolve many software-related problems. There are two options:

  • Restore All Settings: Restores settings and ride modes to factory defaults without deleting ride data.
  • Clear All Data: Restores settings and ride modes to factory defaults AND deletes all ride data.

Warning: Make sure to regularly sync your history to the CoospoRide APP before performing a 'Clear All Data' reset to avoid losing your ride data.

Specifications

General

  • Brand Name: COOSPO
  • Model Number: CS500
  • Type: Wireless Stopwatch (Cycling Computer)
  • Origin: Mainland China
  • Certification: CE, FCC, RoHS
  • Language: English

Display & Features

  • Display Size: 2.6 inches
  • Display Color: Black and White (LCD anti-glare)
  • Navigation: Yes
  • Automatic Sleep: Yes
  • Auto-pause: Yes
  • External Devices: Yes (ANT+ & Bluetooth 5.0 for HR, SPD&CAD, Power Meter, Smart Trainer, Electronic Shifter, Radar Light)
  • Waterproof Level: IPX7
  • Charging Interface Type: Type-C
  • Battery Life: Up to 45 hours

Package Information

  • Length: 21 cm
  • Width: 16 cm
  • Height: 3 cm
  • Weight: 0.192 kg

Common Wheel Size and Circumference (L in mm)

Wheel Size Circumference (mm) Wheel Size Circumference (mm) Wheel Size Circumference (mm)
12 x 1.7593524 x 2.00192526 x 1.402005
14 x 1.5102024 x 2.125196526 x 1.502010
14 x 1.75105526 x 1.75202327 x 12145
16 x 1.5118526 x 1.95205027 x 1-1/82155
16 x 1.75119526 x 2.00205527 x 1-1/42161
18 x 1.5134026 x 2.10206827 x 1-3/82169
18 x 1.75135026 x 2.125207027.5 x 1.752114
20 x 1.75151526 x 2.35208327.5 x 2.1252174
20 x 1-3/8161526 x 3.00217027.5 x 1.52074
22 x 1-3/8177026 x 7/8192027.5 x 1.952146
22 x 1-1/2178526 x 1 (59)191329 x 2.12288
24 x 1175326 x 1 (65)195229 x 2.22298
24 x 3/4 Tubular178526 x 1.25195329 x 2.32326
24 x 1-1/8179526 x 1-1/81970650 x 35A2090
24 x 1-1/4190526 x 1-3/82068650 x 38A2125
24 x 1.75189026 x 1-1/22100650 x 38B2105
700 x 18C2070700 x 19C2080700 x 20C2086
700 x 23C2096700 x 25C2105700 x 28C2136
700 x 30C2170700 x 32C2155700C Tubular2130
700 x 35C2168700 x 38C2180700 x 40C2200
700 x 42C2224700 x 44C2235700 x 45C2242
700 x 47C2268

User Tips

  • Optimize GPS: For best GPS accuracy, ensure the device has a clear view of the sky and remains stationary for a few moments when starting a ride.
  • Sensor Calibration: Always calibrate your speed and power sensors after initial setup or if you change wheel sizes to ensure precise data.
  • Data Review: Utilize the CoospoRide app to review your ride data in detail, track progress, and identify areas for improvement.
  • Language Support: The device supports multiple languages, including English, German, Portuguese, Russian, and French. You can change the language at any time via the System Settings.

Warranty & Support

Contact Information

For technical support or inquiries, please contact COOSPO:

You can also find the official user manual PDF for more detailed information: View User Manual (PDF)

Safety Warnings

  • Do not open or modify the product.
  • Do not disassemble or attempt to service this product.
  • This product is safe under normal and reasonably foreseeable operating conditions.
  • If the product is operating improperly, contact COOSPO support.
  • The product must be returned to the manufacturer for any service or repair.

Environmental Disposal

Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Contact your local government or a retailer for additional information on recycling.

Regulatory Compliance (FCC/IC)

This device complies with Part 15 of the FCC Rules and Innovation, Science and Economic Development Canada's licence-exempt RSS standard(s). Operation is subject to the following two conditions:

  1. This device may not cause harmful interference.
  2. This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.