SinoTrack ST-904L 4G+2G

Contents

SinoTrack ST-904L 4G Mini Waterproof GPS Tracker User Manual

Model: ST-904L 4G+2G

Preface

Thank you for purchasing the SinoTrack GPS tracker. This manual provides detailed instructions on how to operate the device smoothly. Please read this manual carefully before using the device. Note that any updates to this manual may be made without prior notice. The manufacturer is not responsible for any errors or omissions in this manual.

1. Product Summary & Specifications

The SinoTrack GPS tracker operates on existing GSM/GPRS networks and GPS satellites. It is designed to locate and monitor remote targets via SMS, mobile application, and the Internet. The device utilizes advanced GPS and AGPS dual positioning technology for enhanced accuracy.

Key Features:

  • Real-time Tracking
  • History Route Playback
  • Waterproof Design
  • Geo-fence Functionality
  • Overspeed Alarm
  • SOS One Touch Dialing
  • Shocking Alarm
  • Sleep Mode for Power Saving
  • Built-in 1200 mAh Battery
  • GPS/WiFi Positioning
  • HD Voice Monitoring
  • Account Management
Icons illustrating the powerful features of the SinoTrack GPS Tracker

Image: Icons illustrating the powerful features of the SinoTrack GPS Tracker, including Real-time Tracking, History Route Playback, Waterproof, Geo-fence, Overspeed Alarm, SOS One Touch Dialing, Shocking Alarm, Sleep Mode, Built-in 1200 mAh Battery, GPS/WiFi Positioning, HD Voice, and Account Management.

Technical Specifications:

Content Specifications
Dimensions 58*39*20mm
Weight 52g
Network GSM/GPRS/LTE
Band GSM 850/900/1800/1900Mhz / LTE-FDD B1/B2/B3/B4/B5/B7/B8/B28/B66
GPS Sensitivity -159dBm
GPS Accuracy 5m
Battery 3.7V 1200mAh battery
Standby Time 7-15 days
Storage Temperature -40°C to +85°C
Operation Temperature -20°C to +55°C
Humidity 5%--95% non-condensing
Car Charger Input/Output 12-24V input; 5V-1A output
Wall Charger Input/Output 110-220V input; 5V-1A output
Voltage 5V
GPS Module Yes
Special Features Waterproof
GPS Type GPS Tracker
Certification CE, FCC, RoHS
World map graphic demonstrating GPS and WiFi dual positioning

Image: A world map graphic demonstrating GPS and WiFi dual positioning for accurate location tracking, indicating an error margin of 5-10 meters.

2. Hardware Description

Indicator Light Status:

Indicator Light Status Meaning
Yellow light - On GPRS connection
Yellow light - Flash No GPRS signal
Blue light - On GPS connection
Blue light - Flash No GPS signal
Red light - On Tracker is Charging
Red light - Off Tracker is not Charging

SIM Card Installation Guide:

Note: For the 2G Version, only GSM SIM cards work with this model. If using a 3G or 4G card, please confirm it has GSM functionality. Ensure the SIM card does not have a PIN code enabled.

The device supports standard SIM card sizes. You may need to use an adapter for Micro or Nano SIM cards if your SIM is smaller than the standard size.

SinoTrack ST-904L GPS Tracker device

Image: The SinoTrack ST-904L GPS Tracker device, shown in army green.

3. Quick Setup Guide

STEP 1. - Activate SIM

Install the new SIM card (with 2G/4G network function) into your mobile phone and activate it. Ensure the SIM card can make calls, send texts, and has an internet connection. Once confirmed, insert the SIM into your tracker.

STEP 2. - Turn on the tracker

Charge the tracker for approximately 1 hour first. The yellow and blue indicator lights will flash as the device searches for a network and GPS signal. Please wait 5 minutes in an area with good reception (e.g., near a window or outdoors) for both lights to become constantly ON. If the yellow light continues to flash, it indicates no network connection; move to another location. When the device has a GPS signal, it will obtain a GPS location. Otherwise, it will use LBS/WIFI for location.

SinoTrack ST-904L GPS Tracker with a smartphone displaying the tracking application interface

Image: SinoTrack ST-904L GPS Tracker with a smartphone displaying the tracking application interface, showing real-time location, speed, and status.

STEP 3. - Setting APN for the tracker

You need to know your tracker's SIM card's APN (Access Point Name). Every SIM card carrier has its own APN settings. You can find the APN content by checking your SIM card carrier online, inserting the SIM card into a cell phone to find the APN, or by asking your SIM card provider.

To set the tracker's APN, send a text message command from another phone number to the tracker's SIM card phone number.

Example:

  • APN is: everywhere
  • APN username is: eesecure
  • APN password is: secure

(1) If your SIM card's APN is without username and password:

Send command: 8030000 everywhere (where 'everywhere' is your APN). The tracker will reply "SET OK".

(2) If your APN has a username and password:

Send command: 8030000 everywhere eesecure secure (where 'everywhere' is APN, 'eesecure' is APN user, 'secure' is APN pass). The tracker will reply "SET OK".

STEP 4. - Setting GPRS mode

Send text command to the device to set GPRS mode: 7100000

Wait approximately 30 seconds. Both the blue and orange lights should stay ON, indicating that you can now log in to the SinoTrackPro web platform or app to check if the tracker is active. Your username is the tracker's ID number (found on the product), and the default password is 123456.

If all settings are correct, you can track the device online. If it shows a China location while online, take it outdoors to an area with good signal to acquire a GPRS signal, and it will update its location.

4. Operating Instructions

4.1 Online Tracking (Web Platform)

Access the tracking platform via your web browser. The platform URL is: Pro.SinoTrack.com

Use your tracker's ID number as the username and 123456 as the password to log in.

4.2 Applications for Android/iOS

You can download the SinoTrack PRO app from the APP Store (iOS) or Google Play (Android). Alternatively, scan the QR code below:

QR code for SinoTrack PRO app download

Image: QR code for downloading the SinoTrack PRO application, alongside the SinoTrack GPS Tracker and a smartphone displaying the app interface.

If you have multiple SinoTrack GPS trackers and wish to manage them under one account, please contact SinoTrack support to set up a multi-device monitoring account.

5. More Function Settings via SMS

Note: A blank space is represented by a yellow space in SMS commands (e.g., 8030000 everywhere).

5.1 SMS Tracking

Call the SIM card phone number in the tracker, and you will receive a Google Maps link of its position. Alternatively, send the message 6690000 to the tracker's SIM card phone number. For example, you will receive a link like: http://maps.google.com/maps?q=+22.64212,+114.18814 Date: 2017-12-6 Time:1:45 ID: 6170999999 Fix:V Speed:0.0KM/H Bat:80%

5.2 Admin Number Setting

After setting an admin number, all SMS operations to the device will only be accepted from this number.

Command: phone number+password 1 (Replace 'phone number' with your own mobile phone number, not the tracker's SIM number. Default password is 0000).

Example: If your mobile number is 13265790180 and the password is 0000, send 132657901800000 1. The tracker will reply "SET OK!". The '1' indicates it's the first admin number.

Voice Monitor:

Send command 66 to the GPS Tracker from the control number. The tracker will call back to this control number. You must set a control number for the tracker to use this function, and only the control number can send 66 to receive a callback.

Illustration of bidirectional high-definition call feature

Image: An illustration of the bidirectional high-definition call feature, showing a guardian calling the device and a child using the SOS button to automatically make a call by long-pressing the orange button for 3 seconds.

5.3 Over-speed Alarm Setting

When the unit exceeds the set speed, it will send an alert to the admin number.

Over-speed Alarm Setting Command: 1220000 070 (Suppose the speed limit is 70km/h). The tracker will reply "SET OK!".

If the unit's speed exceeds 70km/h, it will send a "speed alarm!" message to the admin number every 5 minutes.

Over-speed Alarm Canceling Command: 12200000. The tracker will reply "SET OK!".

5.4 Shake Alarm Setting

Shake Alarm Setting Command: 1810000T10. The tracker will reply "SET OK!".

Note: For this function to work, the tracker must remain stationary for 5 minutes. The tracker will send an SMS "Shock alarm!" to the admin number when it detects a shock.

Shake Alarm Canceling Command: 1800000. The tracker will reply "SET OK!".

5.5 Device Working Mode Setting

Battery usage time depends on the selected working mode.

1. WORK - Keep working mode: (ST-904/ST-904L works 18 to 24 hours)

Command: WORK0000. Reply: "SET OK!".

The tracker will continuously work and send data at set time intervals.

2. MOVE - Work when the tracker is moving: (ST-904/ST-904L works 3 to 10 days)

Command: MOVE0000. Reply: "SET OK!".

This is the factory default setting. The tracker only works when it is moving. When stopped, it enters sleep mode, GPS shuts off, and GSM operates in low consumption mode. Vibration, SMS commands, or calling the tracker can wake it up to work for 5 minutes.

Attention: If you set MOVE-Work mode and your car runs all day, the tracker cannot save battery, and its operation time will be similar to the 'Keep working mode' (18-24 hours).

3. STANDBY - SMS or Call to tracker, it will work 5 minutes: (ST-904/ST-904L can standby 15 days)

Command: STANDBY0000. Reply: "SET OK!".

In standby mode, GPS is off, and GSM operates in low consumption. SMS or calling the tracker can wake it up to work for 5 minutes.

PS: The ST-904/ST-904L is a mini tracker with a 1,200mAh battery. For longer standby times, consider models with larger batteries:

  • ST-905/ST-905L: 5,000mAh
  • ST-915/ST-915L: 10,000mAh
  • ST-925: 20,800mAh

Larger batteries also mean larger device sizes.

5.6 Terminal (local) Time Setting

The factory setting is GMT 0.

Command: 8960000E00. Reply: "SET OK!".

Examples: 8960000E01 (for GMT+1), 8960000W01 (for GMT-1).

5.7 Reset Hardware

Command: RESET. Reply: "SET OK!".

5.8 Read the Configuration Data

Command: RCONF. Reply: The ID, work mode, IP and Port, and APN of the tracker.

Example Reply: ST904(M),ID:7026015803,UP:0000,U1:,U2:,U3:,MODE:GPRS-MOVE,GEO FENCE:OFF,OVER SPEED:ON,VOICE:OFF,SHAKE ALARM:ON,SLEEP MODE:ON,APN:internet,,,IP:45.112.204.242:8090,GPRS UPLOAD TIME:30TIME ZONE:+8.0

6. Explanation of Parameters/Codes in SMS Message

  • ST-904/ST-904L: The model of the tracker.
  • ID:7028313929: The ID of the GPS Tracker.
  • UP:0000: The password for SMS commands.
  • U1:,U2:,U3:: The control numbers.
  • MODE: GPRS-MOVE: GPS work mode.
  • DAILY:OFF, GEO FENCE:OFF, OVER SPEED:OFF, VOICE:ON, SHAKE ALARM:ON, SLEEP MODE:ON: Status of tracker features.
  • APN: internet: APN of the SIM Card.
  • IP:45.112.204.246:8090: The IP and Port of the tracker.
  • GPRS UPLOAD TIME:30: The GPS data upload interval in seconds.
  • TIME ZONE:E3.0: Time zone of the tracker.
Applications for SinoTrack GPS Tracker

Image: Visual representation of various applications for the GPS tracker, including Kids, Pets, Motorcycles, Cars, and Car Fleets.

Live GPS Tracking with dog

Image: A person holding the GPS tracker and a smartphone displaying live GPS tracking, with a dog running on a beach in the background. The image emphasizes the real-time location and history features.

User Tips

  • Optimal Signal: For best performance, ensure the tracker is in an area with clear sky view for GPS signal and good cellular coverage for GPRS.
  • Initial Testing: After initial setup, test all alarm functions (overspeed, shake) and tracking modes to ensure they are configured correctly.
  • Battery Management: Monitor the battery level regularly, especially when using 'WORK' mode, which consumes more power. Adjust the working mode ('MOVE' or 'STANDBY') to extend battery life if continuous real-time tracking is not required.
  • APN Verification: Double-check the APN settings if you experience issues with online tracking or GPRS connectivity. APN settings are crucial for data transmission.

Troubleshooting (FAQ)

FAQ Instructions/Solutions
Fail to turn it on
  • Please check if battery is charged.
No GSM signal
  • Please check if SIM card installed correctly.
  • Please check if SIM card has GSM network.
  • Don't use the SIM card with PIN code.
  • No calls can be diverted.
  • Please check if voltage of the power is normal.
No GPS
  • A more open view of the sky is recommended to make sure the device can receive the GPS signal normally.
No reply to SMS
  • Password wrong or the format is wrong.
No reply to calling & No alarm message
  • Authorized / admin phone number is incorrect or has not been set up.
SMS position OK, cannot use the APP and web platform
  • Please check if APN is correctly set. Refer to section 3, Step 3 for APN settings.
Platform position is different from the actual position.
  • No upload position time or GPS signal: call the device phone number and receive the position message. If it has no GPS signal, the position is the last GPS positioning location. If it has GPS signal, it means the device hasn't reached the uploading time.

7. Important Notices & Support

Important Notices:

  1. GPS tracking functions best outdoors.
  2. Ensure the SIM card supports making calls, sending messages, and GPRS network.
  3. Ensure the SIM card has sufficient balance.
  4. Ensure call divert is turned off on the SIM card.
  5. Insert the SIM card correctly.
  6. Do not assemble or disassemble the device without authorization.

User Manual (PDF):

A detailed user manual in PDF format is available for download. You can access it here: SinoTrack ST-904L User Manual PDF

Contact Us:

For support or inquiries, please contact us via email:

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.