Introduction
The COOSPO CS500 is a wireless GPS bike computer designed to enhance your cycling experience with advanced navigation, speed tracking, and connectivity features. It functions as a cycling odometer, speedometer, and route navigation device, supporting both ANT+ and Bluetooth 5.0 for seamless integration with various sensors.
Official product video demonstrating the COOSPO CS500's features, including data display, GPS accuracy, navigation, wireless sensor connectivity, and the CoospoRide app.
Product Accessories
Ensure all the following items are included in your package:
- COOSPO CS500 GPS Bike Computer Unit
- USB Charging Cable (Type-C)
- Bike Mount
- Rubber Bands for Mount Installation
- Lanyard
- User Manual (this document)
Image showing the COOSPO CS500 GPS Bike Computer and its included accessories.
Charging
Before first use, please fully charge the device. To charge the CS500:
- Connect the provided USB Type-C cable to the charging port on the bottom of the CS500.
- Connect the other end of the USB cable to a DC 5V power adapter or a computer's USB port.
- The device will indicate charging status on its screen.
Diagram showing the charging process for the CS500.
How to Install
Follow these steps to securely mount your COOSPO CS500 on your bicycle handlebar:
- Place the bike mount on your handlebar in the desired position.
- Secure the mount using the provided rubber bands, ensuring it is tight and stable.
- Align the CS500 with the mount, placing it slightly rotated from its final position.
- Gently press down and twist the CS500 clockwise until it locks securely into place.
Diagram showing the installation steps for the CS500 bike computer.
Initial Settings
Upon first use, after charging, you will need to select your preferred language.
- Power on the device.
- Select your language from the list.
- Confirm your selection. The device will then proceed to the homepage.
To change the language later, navigate to: Home > Settings > System > Language.
Screenshots of the CS500 display during initial language selection and the main menu.
Status Page
The status page provides an overview of your device's current state and connected sensors. When successfully connected to the CoospoRide APP, a Bluetooth icon will be displayed.
Key Indicators:
- GPS Status: Indicates GPS signal strength.
- Battery: Shows current battery level.
- Start/Stop: Indicates if a ride is active or paused.
- Auto-Pause: Indicates if auto-pause is enabled.
- Ride Mode: Displays current ride mode (e.g., Indoor, Outdoor). Press the Menu/Confirm button to switch ride modes.
- Sensor Status: Icons for Heart Rate, Speed, Cadence, Power, Bike Trainer, Shifting, Di2, and Radar Sensor. A solid icon means connected, flashing means added but not connected, and no icon means not added.
- Brightness: Adjust backlight level. Auto mode adjusts based on ambient light.
- Temperature: Current ambient temperature.
- Elevation: Factory calibrated, auto-calibrates when GPS is on.
Example of the CS500 status page showing various data and sensor indicators.
Sensor Management
The CS500 supports pairing with both Bluetooth and ANT+ sensors to collect comprehensive ride data.
Connecting via Bike Computer:
- Go to Settings > Sensors > Add Sensor, or access it directly from the Status Page.
- Use the Up/Down arrow buttons to select the sensor type (e.g., Heart Rate, Speed, Cadence, Power).
- Press the Menu/Confirm button to start searching for available sensors.
- Once detected, select the sensor ID and press Menu/Confirm to add it.
Important: After adding speed or power sensors, ensure you check the connected sensors and set the wheel circumference or calibrate the power meter for accurate readings.
Connecting via CoospoRide App:
- Download the CoospoRide APP from the Apple App Store or Google Play.
- Enable Bluetooth and location permissions for the app on your phone.
- Open the CoospoRide APP, go to Bike Computer > Device, then select Add Sensor.
- The app will search for available sensors. Choose the device ID to add the sensor.
Note: Do not pair the bike computer directly through your phone's Bluetooth settings. Always use the CoospoRide app for pairing. Some phone models may require location permissions to search for Bluetooth devices.
For a detailed sensor compatibility list, visit www.coospo.com/faq.
Start a Ride
GPS Positioning:
- For initial satellite positioning, wait 30-90 seconds in an open outdoor area. The device will automatically set the date and time upon successful positioning.
- Ensure the bike computer remains stationary while acquiring the GPS signal for optimal reception.
Starting a Ride:
- From the homepage, use the Up/Down arrows to select Cycling.
- Press the Menu/Confirm button to enter the cycling page.
- Press the Play/Pause button to start recording your ride.
Alternatively, from any page, press the Play/Pause button to directly enter the cycling page and start a ride.
During a ride, use the Up/Down arrow buttons on the cycling page to change the data pages displayed.
Example of the CS500 display during an active ride, showing various metrics.
Pages & Fields
You can customize the layout, data formatting, and specific data types displayed on your device. All these settings can also be customized via the CoospoRide APP.
Press the Back button to return to the cycling page after customization to see the updated layout.
Lap Function:
Pressing the Lap button during a ride will record a new lap. This function allows you to analyze and compare performance across different data segments. You can also set up automatic segmentation rules based on criteria like distance or time.
Pause & Save:
- If Auto-Pause is enabled, the ride recording will automatically pause when you stop.
- You can manually pause the ride record by pressing the Play/Pause button during the ride. Press it again to continue.
- To end and save an activity, go to the Cycling Menu and select Save.
Screenshots illustrating various customizable data pages and fields on the CS500.
Check Data
Viewing History:
Press the History button on the homepage to access your ride history. You can also navigate to Home > Settings > History > History Data to review saved data.
Syncing Data:
After connecting your CS500 to the CoospoRide APP, your ride data will be automatically synchronized to the app for detailed analysis and tracking.
Device Settings
Ride Mode:
- New Mode: Select 'New Mode' and press Menu/Confirm to add up to five new ride modes. Each mode can be configured separately.
- Delete Mode: You can delete custom ride modes. Note that the system default mode cannot be deleted.
Alert Settings:
Enable alerts and set data thresholds. When a data point exceeds the set threshold, the bike computer will display a pop-up window to notify you.
Pages & Fields:
These settings are consistent with the pages and fields found in the Cycling Pages > Functions Menu, allowing for detailed customization of your display.
Auto Settings:
- Auto Lap: Automatically counts laps based on distance, time, or position.
- Auto Page Turning: Automatically cycles through all data pages.
- Auto Start: Automatically begins recording riding data without manual input when movement is detected.
- Auto Pause: Automatically pauses recording when your speed drops below a set value.
GPS:
Allows you to set the GPS Mode for optimal tracking.
My Stats:
- User Settings: Ensure your profile is set correctly as it impacts the accuracy of measurement data.
- Heart Rate Zone: Input your current Max Heart Rate. If unknown, use the default formula (220 - age).
- Power Zone: Enter your Max Functional Threshold Power (FTP) to automatically calculate zones. If unknown, refer to the system default value of 200.
System Settings
- Backlight: Choose between manual or auto backlight mode.
- Power Manage: Activate Battery Saver Mode to adjust GPS mode and backlight brightness for lower power consumption. The device will enter auto sleep mode after 5 minutes of inactivity.
- Calibration: Perform Elevation Calibration manually or use Compass Calibration for accurate navigation.
- Unit: Customize the unit of data (e.g., km/h vs mph).
- Tone: Adjust key press tones and alert tones.
- Time: Set 12-hour or 24-hour clock format and adjust the time zone for correct current time.
- Language: Change the device's display language.
- Data Overwrite:
- On: Automatically overwrites the oldest data when device storage is insufficient.
- Off: Prevents saving new records if device storage is full.
- Factory Reset:
- Restore All Settings: Resets settings and ride modes to factory defaults without deleting ride data.
- Clear All Data: Resets settings and ride modes to factory defaults and deletes all stored data.
- About: View device information, including device ID, hardware and software versions, and memory status.
Important: Regularly sync your ride history to the CoospoRide APP to ensure all your ride data is recorded and backed up.
USB Sync
To manage your ride data and courses via a computer:
- Use the USB cable to connect the bike computer to your PC.
- Export FIT: You can export FIT files from the "fit activity" folder on the device.
- Import Course: Copy course files to the "Courses" folder on the device, and they will be recognized automatically.
Specifications
| Feature | Detail |
|---|---|
| Brand Name | COOSPO |
| Model Number | CS500 |
| Type | Wireless Stopwatch |
| Connectivity | Wireless (ANT+, Bluetooth 5.0) |
| Display Size | 2.6 inches |
| Display Color | Black and White |
| Navigation | Yes |
| Automatic Sleep | Yes |
| Auto-Pause | Yes |
| External Devices Support | Yes |
| Charging Interface Type | Type-C |
| Waterproof Level | IPX7 |
| Language | English (and others) |
| Origin | Mainland China |
| Certifications | CE, FCC, RoHS |
Common Wheel Size and Circumference (L in mm)
| Wheel Size | Circumference (mm) | Wheel Size | Circumference (mm) | Wheel Size | Circumference (mm) |
|---|---|---|---|---|---|
| 12 x 1.75 | 935 | 24 x 2.00 | 1925 | 26 x 1.40 | 2005 |
| 14 x 1.5 | 1020 | 24 x 2.125 | 1965 | 26 x 1.50 | 2010 |
| 14 x 1.75 | 1055 | 26 x 1.75 | 2023 | 27 x 1 | 2145 |
| 16 x 1.5 | 1185 | 26 x 1.95 | 2050 | 27 x 1-1/8 | 2155 |
| 16 x 1.75 | 1195 | 26 x 2.00 | 2055 | 27 x 1-1/4 | 2161 |
| 18 x 1.5 | 1340 | 26 x 2.10 | 2068 | 27 x 1-3/8 | 2169 |
| 18 x 1.75 | 1350 | 26 x 2.125 | 2070 | 27.5 x 1.75 | 2114 |
| 20 x 1.75 | 1515 | 26 x 2.35 | 2083 | 27.5 x 2.125 | 2174 |
| 20 x 1-3/8 | 1615 | 26 x 3.00 | 2170 | 27.5 x 1.5 | 2074 |
| 22 x 1-3/8 | 1770 | 26 x 7/8 | 1920 | 27.5 x 1.95 | 2146 |
| 22 x 1-1/2 | 1785 | 26 x 1 (59) | 1913 | 29 x 2.1 | 2288 |
| 24 x 1 | 1753 | 26 x 1 (65) | 1952 | 29 x 2.2 | 2298 |
| 24 x 3/4 Tubular | 1785 | 26 x 1.25 | 1953 | 29 x 2.3 | 2326 |
| 24 x 1-1/8 | 1795 | 26 x 1-1/8 | 1970 | 650 x 35A | 2090 |
| 24 x 1-1/4 | 1905 | 26 x 1-3/8 | 2068 | 650 x 38A | 2125 |
| 24 x 1.75 | 1890 | 26 x 1-1/2 | 2100 | 650 x 38B | 2105 |
| 700 x 18C | 2070 | 700 x 19C | 2080 | 700 x 20C | 2086 |
| 700 x 23C | 2096 | 700 x 25C | 2105 | 700 x 28C | 2136 |
| 700 x 30C | 2170 | 700 x 32C | 2155 | 700C Tubular | 2130 |
| 700 x 35C | 2168 | 700 x 38C | 2180 | 700 x 40C | 2200 |
| 700 x 42C | 2224 | 700 x 44C | 2235 | 700 x 45C | 2242 |
| 700 x 47C | 2268 |
User Tips
- Sensor Compatibility: The CS500 is compatible with COOSPO BK805 Bicycle Speed Cadence Dual-Mode Pedal Sensors and other COOSPO speed and cadence sensors, thanks to its ANT+ and Bluetooth dual-mode support.
- Multi-Bike Pairing: The device can be paired with multiple bikes by setting up different ride modes, allowing you to easily switch between profiles for each bicycle.
Safety Information
- Do not open or modify the product.
- Do not disassemble or attempt to service this product yourself.
- This product is safe under normal and reasonably foreseeable operating conditions.
- If the product is operating improperly, contact COOSPO support.
- The product must be returned to the manufacturer for any service or repair.
Warranty & Support
Contact Us:
- Website: www.coospo.com
- E-mail: support@coospo.com
- Phone: +86 (755) 23594795
Attentions & Disclaimer:
The information contained in this manual is for reference only. The product described may be subject to alteration due to the manufacturer's ongoing research and development without prior notice. The manufacturer shall not bear any legal responsibility for any direct or indirect, accidental, or special damages, losses, and expenses arising from or in connection with this manual or the contained product.
Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Contact your local government or a retailer for additional information.
FCC and IC Statement
FCC Statement:
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
IC WARNING:
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions:
- (1) This device may not cause interference.
- (2) This device must accept any interference, including interference that may cause undesired operation of the device.