1. Introduction
Thank you for choosing the Joyroom JR-CB3 Bluetooth 5.3 Car Adapter. This device allows you to wirelessly stream audio from your smartphone or other Bluetooth-enabled devices to your car's audio system, enabling hands-free calling and high-quality music playback. Featuring Bluetooth 5.3, dual microphones with ENC noise cancellation, and independent control buttons, the JR-CB3 enhances your driving experience with convenience and clarity.
2. Package Contents
Please check the package for the following items:
- Joyroom JR-CB3 Wireless Receiver
- Adhesive Pad (x2)
- User Manual & Warranty Card
3. Product Diagram
Familiarize yourself with the components of your JR-CB3 adapter:

Image: Joyroom JR-CB3 Bluetooth Car Adapter with its USB and AUX cables.
- Microphones: Dual mics for clear calls.
- '+' Button: Volume Up.
- '-' Button: Volume Down / Press and hold for 3s to turn atmosphere light On/Off.
- '<<' Button: Previous Track.
- '>>' Button: Next Track.
- Phone Icon Button: Play/Pause music, Answer/End/Reject calls, Activate Voice Assistant, Redial last number.
- TF Card Slot: For direct music playback from a TF card.
4. Setup
4.1 Installation
- Clean the desired surface on your car's dashboard where you want to mount the adapter.
- Peel off the protective film from one of the adhesive pads.
- Firmly stick the adhesive pad onto the cleaned dashboard surface.
- Place the Joyroom JR-CB3 wireless receiver onto the adhesive pad.

Image: The adapter positioned for eye-level operation, promoting safer driving.
4.2 Connecting to Your Car
- Insert the USB connector of the JR-CB3 into a USB power port in your car (e.g., car charger, car's built-in USB port). The light ring on the adapter will illuminate, indicating it's powered on.
- Plug the 3.5mm audio cable of the JR-CB3 into your car's AUX input port.

Image: Step-by-step connection guide for the JR-CB3 to car's AUX and USB ports.
4.3 Bluetooth Pairing
- Ensure your JR-CB3 is powered on (light ring illuminated).
- On your smartphone or Bluetooth-enabled device, go to the Bluetooth settings and turn Bluetooth ON.
- Search for available devices. You should see