Ligghig E27 Lamp Holder Adapter

Contents

Smart Motion Sensor Light Bulb Holder E27 User Manual

Model: E27 Lamp Holder Adapter

Brand: Ligghig

1. Product Overview

The Smart Motion Sensor Light Bulb Holder E27 is an intelligent device designed to automatically control lighting based on human motion and ambient light conditions. It features a PIR (Passive Infrared) induction sensor and a photosensitive element, providing a convenient and energy-efficient lighting solution for various indoor spaces.

Smart Motion Sensor Light Bulb Holder with a bulb installed and a separate unit showing the US plug type.
The Smart Motion Sensor Light Bulb Holder, available in US and EU plug variants.

Key Features:

  • Human Body Sensing: Automatically turns lights on when motion is detected and off when no motion is sensed.
  • E27 Screw Mouth: Compatible with a wide range of E27 base light bulbs, including LED, incandescent, and energy-saving lamps.
  • Plug and Play: Easy installation with no complex wiring required.
  • Photosensitive Element: Prevents activation during daylight or strong ambient light, ensuring operation only in dim light or darkness.
  • Wide Sensing Range: Features a 120-degree wide-angle humanized sensing range with a distance of 0-5 meters.
  • Adjustable Delay Time: Lights remain on for approximately 30 ± 5 seconds after motion ceases.
  • Durable Material: Constructed from PC flame retardant materials for safety.

2. Setup and Installation

Follow these simple steps to install your motion sensor light bulb holder:

  1. Choose Location: Select a suitable location such as hallways, corridors, bathrooms, or entrance rooms where automatic lighting is desired. Ensure the location is free from obstructions that might block the sensor's view.
  2. Select Plug Type: The lamp holder is available in European (EU) and American (US) plug specifications. Ensure you have the correct variant for your region.
  3. Insert Bulb: Carefully screw an E27 base light bulb (LED, incandescent, or energy-saving) into the E27 screw mouth of the lamp holder.
  4. Plug into Socket: Insert the lamp holder directly into a standard wall power socket. No additional wiring is needed.
US Plug variant of the E27 Motion Sensor Lamp Holder. EU Plug variant of the E27 Motion Sensor Lamp Holder.
Available in US and EU plug types.
Diagram showing the two-hole direct plug and E27 screw port features.
Product details: Two-hole direct plug and E27 screw port.

Installation Demonstration Video:

Video demonstrating the installation of the bulb and plugging the holder into a socket, followed by a sensing test.

3. Operating Instructions

The motion sensor lamp holder operates automatically based on detected motion and ambient light levels.

  • Automatic Activation: The light will turn on automatically when human motion is detected within its sensing range (0-5 meters, 120-degree angle).
  • Light Control: The built-in photosensitive element ensures that the light only activates in dim light or dark conditions. It will not turn on during the day or in brightly lit environments.
  • Automatic Deactivation: After a person walks away and no further motion is detected, the light will automatically extinguish after a delay of approximately 20-30 seconds.
Diagram illustrating the motion sensing functionality: light off when no motion, automatic light when sensing human body, and light off after 20 seconds of no motion.
Intelligent sensing: Lights on when motion is detected, off after a delay.
Image showing the two-pole metal plug with a built-in photosensitive element.
The photosensitive element ensures the light only activates in dark conditions.

Usable Scenarios:

Four images showing various indoor scenarios like hallways, bathrooms, and bedrooms where the motion sensor light can be used.
The lamp holder is suitable for hallways, bathrooms, entrance rooms, and other similar spaces.

4. Maintenance

To ensure optimal performance and longevity of your motion sensor light bulb holder, follow these maintenance guidelines:

  • Cleaning: Gently wipe the surface of the device with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these can damage the plastic and sensor.
  • Bulb Replacement: When replacing the light bulb, ensure the device is unplugged from the wall socket to prevent electrical shock.
  • Environmental Conditions: Keep the device away from excessive moisture, direct sunlight, and extreme temperatures.

5. Troubleshooting

If you encounter any issues with your motion sensor light bulb holder, refer to the following troubleshooting tips:

Problem Possible Cause Solution
Light does not turn on when motion is detected.
  • Insufficient darkness (daytime or strong ambient light).
  • Bulb is faulty or not properly installed.
  • Device is not receiving power.
  • Motion sensor is obstructed.
  • Ensure the environment is dim or dark enough for activation.
  • Check and replace the light bulb if necessary.
  • Verify the device is securely plugged into a working power socket.
  • Clear any obstructions from the sensor's view.
Light stays on continuously or turns off too slowly.
  • Continuous motion within sensing range.
  • Sensor malfunction.
  • Ensure there is no continuous motion or heat source (e.g., heating vents) within the sensor's range.
  • Unplug the device for a few minutes and plug it back in to reset. If the problem persists, contact support.
Light turns on randomly.
  • False triggers from pets, drafts, or reflections.
  • Adjust the placement of the device to minimize false triggers.

6. Specifications

Product parameter diagram showing dimensions, suitable light sources, switch category, lamp head category, sensing distance, sensing angle, and delay time.
Detailed product parameters.
Parameter Value
Product Name Intelligent human body sensor wall plug-in lamp holder
Model Number E27 Lamp Holder Adapter
Brand Name Ligghig
Item Type Lamp Bases
Certification CE
Base Material ABS
Origin Mainland China
Product Size (L*H*W) 50mm * 65mm * 45mm (approx. 2.56in x 2.09in for width/depth)
Plug Specifications European / American (Optional)
Suitable Light Sources LED bulbs, energy-saving bulbs, tungsten filament bulbs, ordinary light bulbs
Switch Category Built-in induction switch
Lamp Head Category E27 screw mouth
Sensing Distance 0-5 meters
Sensing Angle 120 degrees
Delay Time 30 ± 5 seconds
Materials PC Flame Retardant Materials
Image showing the dimensions of the E27 Motion Sensor Lamp Holder: 65mm/2.56in and 53mm/2.09in.
Product dimensions.
Image highlighting the PC Flame Retardant Materials used in the product.
Constructed with PC Flame Retardant Materials for safety.
Close-up image of the Fresnel Lenses, which are part of the infrared sensor.
The infrared sensor utilizes Fresnel Lenses for accurate motion detection.

7. Warranty and Support

This product is CE certified, indicating compliance with European safety, health, and environmental protection requirements.

No specific warranty duration is provided. For any product-related inquiries or support, please refer to the official seller's contact information or the detailed user manual PDF available:

View User Manual (PDF)

8. User Tips

  • Check Packaging: Upon receiving the product, inspect the packaging for any damage and ensure all components are present. The quality of materials is generally good.
  • Consider Multiple Units: For consistent automatic lighting across larger areas or multiple rooms, consider purchasing several units. Users have reported satisfaction with multiple purchases.
  • Optimal Placement: Experiment with different socket locations to find the best spot for motion detection, avoiding areas with constant movement or heat sources that could trigger false alarms.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.