1. Introduction
Thank you for purchasing the SinoTrack ST-904L 4G GPS Tracker. This device is designed for real-time tracking and monitoring of remote targets using existing GSM/GPRS networks and GPS satellites. It supports SMS, mobile application, and web platform tracking, utilizing advanced GPS and AGPS dual positioning technology. Please read this manual carefully to ensure proper operation and to fully utilize all features of your tracker.
2. Product Overview
2.1. Key Features
- Real-time Tracking
- History Route Playback
- Waterproof Design
- Geo-fence Functionality
- Overspeed Alarm
- SOS One-Touch Dialing
- Shocking Alarm
- Sleep Mode for Power Saving
- Built-in 1200 mAh Battery
- GPS/WiFi Dual Positioning
- HD Voice (Bidirectional Call)
- Account Management

Powerful Features: Icons representing real-time tracking, history playback, waterproofing, geo-fencing, overspeed alarm, SOS, shocking alarm, sleep mode, built-in battery, GPS/WiFi positioning, HD voice, and account management.
2.2. Package Contents
Upon unpacking, please ensure all items are present:
- 1x ST-904L GPS Tracker
- 1x USB Charging Cable
- 1x Lanyard
- 1x Mini Bag
- 1x Double-sided Sticker
- 1x User Manual (this document)
3. Specifications
| Feature | Specification |
|---|---|
| Dimensions | 58mm x 39mm x 20mm (2.28in x 1.54in x 0.79in) |
| Weight | 52g |
| Network | GSM/GPRS/LTE (2G+4G) |
| Bands | GSM 850/900/1800/1900MHz; LTE-FDD B1/B2/B3/B4/B5/B7/B8/B28/B66 |
| GPS Sensitivity | -159dBm |
| GPS Accuracy | 5-10m |
| Battery | 3.7V 1200mAh Li-ion battery |
| Standby Time | 7-15 days (depending on working mode) |
| Storage Temperature | -40°C to +85°C |
| Operation Temperature | -20°C to +55°C |
| Humidity | 5%--95% non-condensing |
| Wall Charger Input/Output | 110-220V Input; 5V-1A Output |

Product Details: Visual representation of dimensions, weight, network, GPS accuracy, battery life, and package contents.
4. Hardware Description
4.1. Indicator Light Status
The device features indicator lights to show its current status:
| Indicator Light Status | Meaning |
|---|---|
| Yellow light - On | GPRS connection |
| Yellow light - Flash | No GPRS signal |
| Blue light - On | GPS connection |
| Blue light - Flash | No GPS signal |
| Red light - On | Tracker is Charging |
| Red light - Off | Tracker is not Charging |
4.2. SIM Card Installation Guide
Note: This model primarily uses 2G GSM SIM cards. If using a 3G or 4G SIM card, ensure it supports GSM functionality. The SIM card must not have a PIN code enabled.
- Open the SIM card slot cover on the device.
- Insert the SIM card into the slot with the metal contacts facing down, ensuring it is correctly oriented.
- Close the SIM card slot cover securely.

SIM Card Types: Illustration of Normal, Micro, and Nano SIM cards. Ensure your SIM card fits the device's slot.
5. Quick Setup Guide
Step 1: Activate SIM Card
Before inserting the SIM card into the tracker, install it into a mobile phone. Ensure the SIM card has 2G/4G network function, can make calls, send texts, and has an active internet connection. Once confirmed, insert the SIM card into your tracker.
Step 2: Turn On the Tracker
- Charge the device for approximately 1 hour initially.
- The yellow and blue indicator lights will begin flashing as the tracker searches for a network and GPS signal.
- Place the tracker in an area with good reception (e.g., near a window or outdoors) for about 5 minutes. Wait for both lights to become solid (constantly on). If the yellow light continues to flash, it indicates no network connection; try moving to a different location.
- Once a GPS signal is acquired, the device will obtain a GPS location. If no GPS signal is available, it will use LBS/WiFi for location.
Step 3: Setting APN for the Tracker
The tracker requires the correct Access Point Name (APN) settings for its SIM card to connect to the internet. You can find your SIM card's APN by checking your carrier's website, inserting the SIM into a phone to view settings, or contacting your SIM card provider.
Send SMS commands from another phone to the tracker's SIM card number:
- If APN has no username or password:
Command:8030000 APN_NAME(e.g.,8030000 everywhere)
Reply: