WESA EP-09-LAN

Contents

WESA Blue France Standard Wall Socket

Model: EP-09-LAN

Introduction

Thank you for choosing the WESA Blue France Standard Wall Socket. This manual provides essential information for the safe installation, operation, and maintenance of your new electrical outlet. Please read this manual thoroughly before installation and keep it for future reference.

Front view of the WESA Blue France Standard Wall Socket

Figure 1: Front view of the WESA Blue France Standard Wall Socket, rated 16A 250V.

Safety Information

WARNING: Risk of electric shock. Improper installation can lead to serious injury or death. Always follow these safety precautions:

  • Always turn off power at the circuit breaker or fuse box before installing or servicing the socket.
  • Verify that the power is off using a voltage tester before touching any wires.
  • Installation should be performed by a qualified electrician or a knowledgeable individual familiar with electrical wiring codes and practices.
  • Do not install in wet locations or areas with high humidity.
  • Ensure all wire connections are secure and properly insulated.
  • Do not exceed the specified electrical ratings (16A, 250V).

Package Contents

  • 1 x WESA Blue France Standard Wall Socket (Model: EP-09-LAN)

Specifications

FeatureSpecification
Brand NameWESA
Model NumberEP-09-LAN
MaterialPlastic
Socket TypeSocket 220V (France Standard)
Installation TypeWall Embedded
Rated Current16A
Rated Voltage250V
GroundingStandard Grounding
ApplicationResidential / General-Purpose
ShapeSQUARE
Standard Dimensions83*83mm (3.26*3.26 inches)
Backlight/IndicationNot applicable
Is Smart DeviceNo
OriginMainland China
CertificationCE, RoHS, WEEE
Dimension diagrams for various socket types

Figure 2: Detailed dimensions for various socket configurations. All faceplates are 83x83mm (3.26x3.26 inches). Depths vary by type, e.g., 39mm (1.53in) for '1 Socket No Ground' and 38mm (1.49in) for '1 Socket With Ground' and 'France Socket Ground'.

Setup and Installation

Before beginning installation, ensure you have the necessary tools: screwdriver, wire strippers, voltage tester, and electrical tape.

  1. Turn Off Power: Locate the circuit breaker or fuse box that controls the power to the installation area. Switch off the corresponding breaker or remove the fuse. Use a voltage tester to confirm that the power is completely off at the outlet box.
  2. Prepare Wires: Carefully remove the existing outlet (if any). Strip approximately 1/2 inch (12-15mm) of insulation from the ends of the electrical wires (Live, Neutral, Ground).
  3. Connect Wires: Connect the wires to the corresponding terminals on the back of the WESA socket. Typically:
    • Live (Phase) Wire: Usually brown or red, connects to the 'L' terminal.
    • Neutral Wire: Usually blue or black, connects to the 'N' terminal.
    • Ground Wire: Usually green/yellow striped, connects to the ground terminal (often marked with a ground symbol or 'E').
    Ensure all connections are tight and secure. Tuck any excess wire neatly into the electrical box.
  4. Mount the Socket: Carefully push the socket into the wall box. Secure it using the mounting screws provided or the integrated claws, ensuring it is flush with the wall surface.
  5. Attach Faceplate: Snap or screw the decorative faceplate onto the mounted socket.
  6. Restore Power: Go back to the circuit breaker or fuse box and turn the power back on. Test the socket with a known working appliance.

Video 1: Product overview showing the WESA wall socket from various angles, including the rear for wiring reference.

Operating Instructions

To use the wall socket, simply insert the plug of your electrical appliance into the socket. Ensure the plug is fully inserted for a secure connection. The socket is designed for standard France-type plugs.

Maintenance

  • Cleaning: To clean the socket, first ensure power is off at the circuit breaker. Wipe the surface with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners, solvents, or excessive moisture, as these can damage the finish or internal components.
  • Inspection: Periodically inspect the socket for any signs of damage, such as cracks, discoloration, or loose connections. If any damage is observed, turn off power immediately and have the socket inspected and replaced by a qualified professional.

Troubleshooting

  • No Power from Socket:
    • Check your circuit breaker or fuse box to ensure the circuit has not tripped or a fuse has not blown.
    • Verify that the appliance you are trying to use is working correctly by testing it in another known-good outlet.
    • If the issue persists, turn off power and inspect the wiring connections at the back of the socket for any looseness. If you are unsure, consult a qualified electrician.
  • Plug Feels Loose in Socket:
    • Ensure the plug is fully inserted.
    • If the plug still feels loose, the socket may be worn. For safety, it is recommended to replace a worn socket.

Warranty and Support

For warranty information or technical support, please contact the seller or retailer from whom you purchased this product. Keep your proof of purchase for any warranty claims.

A detailed user manual in PDF format is also available. You can typically find this document on the product's official page or by contacting customer support. The direct link to the PDF is: https://manuals.plus/m/d1692b0826371732aded05e7a61aedaa2edf2992b743b8d29c1db8ccb8155777

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.