KEMIMOTO 30inch UTV Chase Light Bar Instruction Manual

1. Product Overview

The KEMIMOTO LED Strobe Chase Bar is designed for off-road UTV, ATV, and SXS vehicles, featuring multiple lighting functions for enhanced visibility and safety. It is built with durable materials to withstand harsh conditions.

2. Parts Included

The package includes the following components:

• 1 x Chase light bar
• 1 x Wire harness with rocker switch
• 1 x Wire harness with in-line dual switch
• 1 x 3 Pin extension cable
• 1 x Multifunction wire
• 1 x Set of Mounting brackets & screws

3. Specifications

4. Installation

Professional installation is recommended for optimal performance and safety.

4.1 Mounting the Light Bar

The light bar features adjustable brackets that can be tilted up or down using screw holes, allowing you to adjust to your desired angle. The extended wiring harness is suitable for 2-seater, 4-seater, and 6-seater UTVs.

4.2 Installation Video Guide

For a visual guide on the installation process, please refer to the official installation video:

5. Wiring and Functions

5.1 Power Connection

• Connect the Red Wire 12V (+) to the Positive post of the battery.
• Connect the Black Wire (-) to the Negative post of the battery.
• The Red Running Light will always be on when the chase light bar is powered on.
• Brake & Turn Signal functions may require relays to work properly. Relays are not included due to universal fitment considerations.
• For 4-door models, the 3 Pin Extension Cable may be required.

5.2 Light Functions

The chase light bar offers multiple functions:

• Blocks #1 and #5: Serve as Running Lights, Stop Lights, and Turn Signal Lights (Red and Amber).
• Blocks #2 and #4: Function as Strobe Lights with 7 different patterns (Amber).
• Block #3: Acts as a general Lighting or Reverse Light (White).

5.3 Wiring Diagram Reference

For a detailed wiring diagram, please refer to the user manual PDF available at this link. The diagram illustrates connections for running lights, turn signals, brake signals, and reverse signals.

6. Operating Instructions

The light bar comes with two types of switches for flexible control:

6.1 In-Line Dual Switch Operation

• On/Off: Press the switch to turn the light bar on or off. This function is momentary.
• Strobe Lights: Press down the switch for 3 seconds to turn the strobe lights on or off.
• Strobe Patterns: The amber strobe patterns include 1 solid and 8 flash modes.

6.2 Rocker Switch Operation

The rocker switch provides a dedicated On/Off control and a separate strobe function. You can install the rocker switch in a console slot or use it as an alternative if slots are full.

7. Maintenance

To ensure the longevity and optimal performance of your KEMIMOTO Chase Light Bar:

• Regularly inspect the wiring for any signs of wear, fraying, or damage.
• Keep the light bar and connectors clean from dirt, mud, and debris. Use a soft cloth and mild detergent if necessary.
• Ensure all mounting screws are tight to prevent vibration damage.
• The durable PC plastic lens is scratch-resistant and shatterproof, but avoid abrasive cleaners that could damage the surface.
• The waterproof 3-prong connector provides excellent protection against water and dust; however, avoid submerging the light bar for extended periods.

8. Troubleshooting

If you encounter issues with your chase light bar, consider the following:

• Light bar not turning on: Check all wiring connections, especially the positive and negative terminals to the battery. Ensure the switch is in the 'On' position.
• Specific light functions not working (e.g., brake/turn signals): Verify the correct wiring for each function. Remember that brake and turn signal functions may require external relays (not included) for proper operation.
• Intermittent operation: Inspect for loose connections or damaged wiring. Ensure the power source is stable.
• Strobe lights not activating: For the in-line switch, ensure you press and hold for 3 seconds to activate/deactivate strobe mode.

If problems persist, please contact customer support for assistance.

9. User Tips

• The product is described as top-notch, very well finished, and of great quality, indicating a robust build.
• The inclusion of both in-line and rocker switches provides flexibility for different dashboard setups or user preferences.
• Consider purchasing appropriate relays if you intend to use the brake and turn signal functions, as they are not included.

10. Compatibility (Fitment)

This chase light bar is compatible with a wide range of UTV, ATV, and SXS models, including but not limited to:

• Polaris: All year RZR PRO XP / XP 1000 / XP 4 1000 / S 1000 / Turbo S / Turbo S 4 / XP Turbo / XP 4 Turbo/ S4 1000 / 900 / XP Turbo S / XP 4 Turbo S / S 900 / 570 / PRO R/ TURBO R / RZR Trail 900 / Trail S 900 / Trail S 1000.
• Polaris Ranger: All year XP 1000 / XP 900 / XP 570 / 570 / General 1000/ XP 1000.
• Pioneer: 700-4 / 700 / Big Red / Rancher 420 / Rincon 680 / Rincon 650.
• Can-Am: Commander Max / Outlander 1000 Gen2 / Commander X / Defender / Defender Max / Maverick Max / Maverick STD / Maverick XDS Turbo / Maverick XMR / Maverick XRS / Maverick XRS/DPS/ Maverick Trail 1000 / Maverick Sport Max 1000 / Outlander 800R Max Gen2 / Maverick XXC / Maverick X3 / Maverick X3 Max / Outlander 500 Gen1 / 650 Gen1 / 800 Gen1 / 500 Gen2 / 650 Gen2 /800 Gen2.
• Arctic Cat: Prowler / HDX / Trail / Trail Sport / Wildcat / Wildcat 4.
• Other: CFMoto Uforce 800 1000/ ZForce 950 800; Golf Cart; Segway Villain 1000 / Wolverine X4.
• Kawasaki: Teryx 4 / Teryx 800 / Mule FXT / Teryx 750 / 600 / Teryx Krx 1000 / Mule 3010 /Mule 4010 / Mule 4010 D / Mule 4010 Trans D / Mule 610 / Mule Pro FXT.

Notice: KEMITOUR parts are not sponsored or endorsed by, or affiliated with the brands its parts fit, including Polaris Industries, BRP, HONDA, YAMAHA.

11. Warranty & Support

If you have any questions or require further assistance regarding this product, please contact the seller or manufacturer directly. For additional item guides and documents, please refer to the user manual PDF available at this link.