aigo AK800

Contents

Aigo AK800 PC Power Supply User Manual

Model: AK800

1. Product Overview

The Aigo AK800 is an 800W non-modular ATX power supply unit designed for desktop computers, including gaming, server, and mining applications. It features a 120mm RGB fan for cooling and operates on a 200-240Vac input voltage.

Aigo AK800 Power Supply with RGB fan and packaging
Aigo AK800 Power Supply and Packaging
Angled view of the Aigo AK800 Power Supply
Angled View of the PSU
Top view of the Aigo AK800 Power Supply fan
Top View of the 120mm RGB Fan
Rear view of the Aigo AK800 Power Supply with power switch and input
Rear View with Power Input and Switch
Angled view of the Aigo AK800 Power Supply showing cable bundles
Angled View Showing Cable Bundles

2. Setup and Installation

CAUTION: Equipment installation must comply with local and national electrical codes. Ensure your system is powered off and unplugged before installation.

  1. General Case Installation

    Install the power supply at the intended location within your PC case. Use a screwdriver (typically a Phillips head) to secure the power supply in place with screws.

  2. Motherboard Connection (20+4PIN)

    Locate the main power cable (20+4PIN) on the power supply. Attach it to the long, rectangular port on your motherboard. Ensure it clicks securely into place.

  3. SATA/HDD Connections

    Use the smaller SATA power cables to connect your hard drives (HDDs) and solid-state drives (SSDs) to the power supply. The Aigo AK800 includes 4 SATA cables and 4 ATA cables.

  4. Graphics Card Connection (6PIN+2PIN VGA)

    Connect the 6PIN+2PIN VGA power cables from the power supply to your graphics card. The power supply includes dual 6- to 8-pin power supplies for PCI Express.

  5. Lighting System Connection (4PIN)

    If applicable, use the 4PIN cable to connect the power supply to your system's lighting system.

  6. CPU Power Connector (4PIN or 8PIN)

    Connect the 4PIN or 8PIN CPU power connector to your motherboard. If your power supply does not have an 8PIN connector, the 4PIN connector can still be used.

Installation Guide diagram for Aigo AK800 Power Supply showing connections to motherboard, HDD, VGA, and lighting system.
Installation Guide Diagram

3. Operating Instructions

After successful installation, ensure all connections are secure. Flip the power switch on the rear of the PSU to the 'ON' position. Your computer should now power on. The integrated 120mm fan features RGB lighting, which should illuminate upon startup.

4. Maintenance

  • Do not remove the cover under any circumstances. Opening the power supply can expose you to dangerous voltages and will void your warranty.
  • Regularly clean your PC case and power supply fan grille to prevent dust buildup, which can hinder cooling performance. Use compressed air for best results.
  • This product is designed for use only below 2000 meters altitude and in non-tropical climates.

5. Troubleshooting

  • No Power: Double-check all power connections, especially the 20+4PIN motherboard connector and the CPU power connector. Ensure the PSU's rear switch is in the 'ON' position.
  • Fan Not Spinning / No RGB: Verify that the 4PIN lighting system cable (if applicable) is correctly connected. If the fan is quiet but not lighting up, it might be a specific RGB mode or a non-RGB fan variant, though the product is advertised with an RGB fan.
  • System Instability: Ensure your system's power requirements do not exceed the PSU's capabilities. While marked as 800W, some users have noted the rated output might be closer to 700W. Consider this when calculating your system's total power draw.

6. Specifications

Aigo AK800 Power Supply Electrical Specifications
Feature Detail
Model NumberAK800
Brand Nameaigo
Max. Power800W
AC Input200-240Vac, 10A, 50-60Hz
PFC TypePASSIVE
Fans1 (120mm RGB Fan)
ModularNon-Modular
80 PLUS CertificationOther Certification
CertificationCE, FCC, RoHS
ApplicationDesktop, Server, Mining
Interface Type20 + 4Pin
CPU Power Connector8 pin x2
Graphics Card 12V Pin Number8 pin +2 x6 pin
Number of SATA Ports4
D-type Bus Number2
Package Length27 cm
Package Width20 cm
Package Height12 cm
Package Weight1.613 kg

DC Output Details

DC Output Max. Current Max. Power
+3.3V15A
+5V15A
+12V66A792W
-12V0.3A
+5VSB2.5A

Note: Values for Max. Current and Max. Power are based on the product label. There may be slight variations between different production batches or labels.

Product label with detailed electrical specifications for Aigo AK800 Power Supply, showing 792W on +12V rail.
Product Label (Version 1)
Alternate product label with detailed electrical specifications for Aigo AK800 Power Supply, showing 678W on +12V rail.
Product Label (Version 2)

7. Warranty and Support

For warranty claims or technical support, please contact the manufacturer or your point of purchase. Keep your proof of purchase for warranty validation.

A detailed user manual in PDF format is available for download. You can access it via this link: View User Manual (PDF)

8. User Tips

  • The power supply comes with a comprehensive set of cables, including those for PCI Express with dual 6- to 8-pin power supplies.
  • The motherboard connection supports both dual 8-pin and single 4-pin configurations.
  • Users report that the cables and plugs are sturdy and well-made.
  • The fan operates very quietly.
  • While the product is marketed as 800W, some observations suggest the continuous rated output might be closer to 700W. Plan your system's power budget accordingly.

9. Frequently Asked Questions (FAQ)

Q: What is the power efficiency percentage?
A: The Aigo AK800 has an "Other Certification" for 80 PLUS, indicating it meets certain efficiency standards. A specific percentage is not explicitly provided in the available documentation.
Q: Does this power supply work with 120 volts?
A: No, the AC input for this power supply is 200-240Vac. It is not compatible with 120V systems.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.