1. Introduction
This manual provides detailed instructions for the AVATTO Tuya Smart Dimmer Module (DMS16). This intelligent dimmer module allows you to control and dim your LED lights via a mobile application (Tuya Smart or Smart Life) and voice commands through smart assistants like Amazon Alexa and Google Home. It is available in both WiFi and Zigbee versions, offering flexible integration into your smart home system.
The module supports 1-channel (1CH) and 2-channel (2CH) configurations, enabling precise control over your lighting. Please read this manual carefully before installation and use to ensure safe and optimal performance.
2. Safety Warnings
- Installation must be carried out by a qualified electrician in accordance with local regulations.
- Keep the device out of reach of children.
- Keep the device away from water, damp, or hot environments.
- Install the device away from strong signal sources such as microwave ovens that may cause signal interruption, resulting in abnormal operation of the device.
- Obstruction by concrete walls or metallic materials may reduce the effective operation range of the device and should be avoided.
- Do NOT attempt to disassemble, repair, or modify the device.
3. Technical Specifications
| Feature | Specification |
|---|---|
| Product Type | Wi-Fi Dimmer Module / Zigbee Dimmer Module |
| Voltage | AC100-240V 50/60Hz |
| Max. Load (1CH Wi-Fi/Zigbee) | LED (AC230V 150W) (AC120V 80W) |
| Max. Load (2CH Wi-Fi/Zigbee) | LED (AC230V 2x100W) (AC120V 2x60W) |
| Operation Frequency (WiFi) | 2.412GHz-2.484GHz |
| Protocol (WiFi) | WIFI IEEE 802.11b/g/n |
| Protocol (Zigbee) | Zigbee (requires Tuya Zigbee Hub) |
| Operation Temperature | -10°C to +40°C |
| Operation Range | <100m |
| Dimensions (WxDxH) | 39x39x19.4 mm |
| IP Rating | IP20 |
| Warranty | 2 years |
| Certificates | CE, ROHS |
Note: The dimmer module supports triac dimming LED or tungsten lamps.
Image: Product dimensions and a summary of technical specifications.
4. Installation
Wiring Instructions and Diagrams:
- Turn off the power supply before carrying out any electrical installation work.
- Connect wires according to the wiring diagram provided below for your specific module type.
- Insert the module into the junction box.
- Turn on the power supply and follow the switch module configuration instructions.
Note: Take your smartphone close to the switch module when you're configuring, and make sure you have min. 50% Wi-Fi signal.
4.1. Wiring Diagrams for Wi-Fi Dimmer Modules
1 CH Wi-Fi Dimmer Module
Double Switch Configuration:
Diagram showing connections for a 1-channel Wi-Fi dimmer module with two switches (L, L1, N, S1 terminals).
Without Switch Configuration:
Diagram showing connections for a 1-channel Wi-Fi dimmer module without a physical switch (L, L1, N terminals).
2 CH Wi-Fi Dimmer Module
Double Switch Configuration:
Diagram showing connections for a 2-channel Wi-Fi dimmer module with two switches (L, L1, L2, N, S1, S2 terminals).
Without Switch Configuration:
Diagram showing connections for a 2-channel Wi-Fi dimmer module without a physical switch (L, L1, L2, N terminals).
4.2. Wiring Diagram for Zigbee Dimmer Modules
The wiring for Zigbee modules is similar to the Wi-Fi modules. Ensure you connect to a compatible Zigbee hub.
2 CH Zigbee Dimmer Module
Diagram showing connections for a 2-channel Zigbee dimmer module (L, L1, L2, N, S1, S2 terminals).
5. Network Connection & App Setup
The AVATTO Smart Dimmer Module can be controlled via the Tuya Smart or Smart Life mobile application. For Zigbee versions, a Tuya Zigbee Hub is required.
5.1. Download the App
Scan the QR codes below or search for "Tuya Smart" or "Smart Life" in your App Store (iOS) or Google Play (Android) to download the application.
Image: QR codes for downloading the Tuya Smart and Smart Life mobile applications.
5.2. Register/Log In
Log in or register your account using your mobile number or email address. You will need to enter a verification code sent to you, then set your login password. Click "Create Family" to proceed into the app.
Image: App screen for user registration or login.
5.3. Pairing the Dimmer Module
Follow these steps to connect your dimmer module to the app:
- After wiring the switch module, press and hold the reset button on the module for about 5 seconds. Alternatively, turn off the traditional dimmer switch (connected to the Wi-Fi dimmer module), then press and hold it for 10 seconds. The indicator light inside the module should start flashing quickly, indicating it's in pairing mode.
- Open the Tuya Smart or Smart Life app. Ensure your mobile device's Bluetooth is enabled.
- Click the "+" icon in the app to add a new device.
- The app should automatically discover the "Dimmer Module" (for WiFi) or "Dimmer Switch" (for Zigbee). Click "Add" or follow the on-screen instructions for pairing.
- For WiFi modules, you may need to enter your 2.4 GHz Wi-Fi network details (SSID and password).
- The connection process may take 10-120 seconds depending on your network conditions.
- Once successfully added, you can control the device via your mobile phone.
Image: Diagram indicating the reset key on the dimmer module.
Image: App screen displaying a discovered dimmer module ready for addition.
Image: App screen confirming successful addition of the dimmer module.
5.4. Visual Guide: Network Connection
Video: A demonstration of connecting the dimmer module to the network and controlling it via the mobile app, including both WiFi and Zigbee setup processes.
6. Operating Instructions
6.1. Manual Override (using physical push-switch)
The dimmer module supports manual control via a connected push-switch:
- Short Push (<1s): Toggles the light ON/OFF.
- Long Push (>1s): Adjusts the brightness level.
Notes:
- Both adjustments on the App and the physical push-switch can overwrite each other; the last adjustment remains in memory.
- App control is synchronized with the manual switch.
- The "S" terminals may be left unconnected if no manual control is required.
6.2. App Control
Once connected to the Tuya Smart or Smart Life app, you can control the dimmer module remotely. The app interface allows you to:
- Turn lights ON/OFF.
- Adjust brightness levels smoothly.
- Set schedules and timers for automated lighting.
- Create groups for simultaneous control of multiple dimmer modules.
Image: Demonstration of controlling light brightness via the mobile app.
Image: Screenshot of the app interface for controlling the dimmer module.
6.3. Voice Control
The AVATTO Smart Dimmer Module supports voice control through popular smart assistants:
- Amazon Alexa: Link your Tuya Smart/Smart Life account to Alexa. Use commands like, "Alexa, set living room light brightness to 50%."
- Google Home: Link your Tuya Smart/Smart Life account to Google Home. Use commands like, "Hey Google, dim the bedroom light."
Image: Visual representation of voice control functionality with Amazon Alexa and Google Home devices.
7. User Tips
- The dimmer provides smooth dimming for LED chandeliers without buzzing sounds.
- The Zigbee version works well with Zigbee2MQTT for Home Assistant users.
- For Home Assistant integration with the Zigbee version, custom quirks might be needed. Search online forums for community-contributed solutions.
- When using an external switch, remember to select the correct type of external switch within the app settings to ensure proper functionality.
- For optimal performance, especially with Zigbee modules, ensure the device is not too far from its respective gateway/hub.
8. Troubleshooting (FAQ)
Q1: What should I do if I can't configure the switch module?
- Please check whether the device is powered on.
- Make sure your mobile and dimmer module are on the same 2.4 GHz Wi-Fi network (for Wi-Fi modules).
- Check if you have good internet conditions.
- Make sure the password entered in the App is correct.
- Make sure the wiring is correct.
Q2: What device can be connected to this Wi-Fi switch module?
The module supports triac dimming LED or tungsten lamps.
Q3: What happens if the Wi-Fi goes off?
You can still control the light connected to the dimmer module with your traditional switch. Once Wi-Fi is active again, the device connected to the module will connect automatically to your Wi-Fi network.
Q4: What should I do if I change the Wi-Fi network or change the password?
You have to re-connect our Wi-Fi dimmer module to the new Wi-Fi network accordingly, as per the App User Manual.
Q5: How do I reset the device?
Press the traditional dimmer switch (the one connected to the Wi-Fi dimmer module). Then press and hold for 10 seconds or more until the lamp connected to the module will flick quickly and enter into configuration mode.
Q6: Does it require a neutral wire to work?
Yes, based on the wiring diagrams provided, a neutral wire (N) connection is required for the dimmer module to function correctly.
Q7: Can I use it with a Rocket switch and reset switch?
The manual override section mentions using a "push-switch" for short and long presses. If "Rocket switch" refers to a standard push-button switch, it should be compatible. The "reset switch" is used for pairing/resetting the device.
9. Warranty & Support
The AVATTO Smart Dimmer Module comes with a 2-year warranty from the date of purchase. Please retain your proof of purchase for warranty claims.
For further assistance, technical support, or detailed documentation, please refer to the official product page or contact AVATTO customer service.
A comprehensive user manual in PDF format is also available for download. You can find it by searching for "AVATTO DMS16 User Manual PDF" online or by visiting the product's support page.