Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your DIANQI 12mm Ultra Short Push Button Switch. Designed for various applications, this momentary, self-resetting switch features an integrated LED light and is available in multiple voltage options and shell finishes. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.
Specifications
| Feature | Detail |
|---|---|
| Item Type | SWITCHES |
| Brand Name | DIANQI |
| Origin | Mainland China |
| Certification | CCC |
| Material | Alloy |
| Case Material | Brass plating / Black oxide |
| Case Color Options | White, Black |
| LED Color Options | Red, Yellow, Blue, White, Green |
| Voltage Options | 3-6V, 12-24V, 220V (depending on model) |
| Switch Type | Momentary, Self-resetting |
| Mounting Hole Diameter | 12mm |
| Wire Length | Approx. 143mm |
| Net Weight | 5g |
Note: Please allow slight errors due to manual measurement for physical dimensions.
Components
Each package typically includes:
- 1x 12mm Ultra Short Push Button Switch (selected color, voltage, and shell type)
- Pre-attached wiring harness (approx. 143mm length)
- Mounting nut and washer
Installation
Mounting the Switch
- Drill a 12mm diameter hole in your desired mounting surface.
- Insert the switch body through the hole.
- Secure the switch with the provided washer and nut on the backside of the panel. Ensure it is tightened firmly but do not overtighten.
Wiring Instructions
The switch comes with a pre-attached 4-wire harness. Refer to the wiring diagram below for correct connections. Incorrect wiring can damage the switch or connected components.
- Wires ① and ② (Normal Open - NO): These are the main switch contacts. When the button is pressed, these contacts close, completing the circuit.
- Wire ③ (LED Power Supply Wire): Connect this wire to the positive (+) terminal of your LED power supply.
- Wire ④ (LED Power Supply Common Contact): Connect this wire to the negative (-) terminal of your LED power supply.
Important: Ensure the voltage supplied to the LED matches the switch's specified LED voltage (e.g., 3-6V, 12-24V, 220V). Applying incorrect voltage will damage the LED.
For further assistance with wiring diagrams, especially for specific applications like connecting to a lamp, please consult a qualified electrician or refer to the official user manual PDF available at this link.
Operation
This is a momentary, self-resetting push button switch. This means:
- Momentary Action: The switch contacts remain closed only while the button is physically pressed.
- Self-Resetting: Once the button is released, it automatically returns to its original (open) position, breaking the circuit.
The integrated LED light will illuminate when power is supplied to its dedicated wires (③ and ④), independent of the switch's momentary action, unless wired otherwise for specific functionality.
Maintenance
The DIANQI push button switch is designed for durability and requires minimal maintenance.
- Cleaning: Use a soft, dry cloth to clean the switch surface. Avoid abrasive cleaners or solvents that could damage the finish or internal components.
- Inspection: Periodically check the wiring connections to ensure they are secure and free from corrosion or damage.
- Waterproof Rating: While the switch is waterproof, avoid prolonged submersion or high-pressure water jets unless specifically rated for such conditions.
Troubleshooting
LED Not Lighting Up
- Check Power Supply: Ensure the LED power supply is active and providing the correct voltage as specified for your switch model.
- Verify Wiring: Double-check that wires ③ (LED power supply wire) and ④ (LED power supply common contact) are correctly connected to the positive and negative terminals, respectively.
- Polarity: Confirm correct polarity for the LED connection.
- LED Damage: If all connections are correct and power is present, the LED might be damaged.
Switch Not Activating Circuit
- Check Main Circuit Power: Ensure the circuit you are trying to activate has power.
- Verify Switch Wiring: Confirm that wires ① and ② (Normal Open - NO) are correctly integrated into your circuit.
- Continuity Test: Use a multimeter to test the continuity across wires ① and ② when the button is pressed. If there's no continuity, the switch might be faulty.
User Tips
- Tactile Feedback: Users report a satisfying, non-squishy, short-stroke activation with a clear, sharp click, indicating a responsive and reliable feel.
- Quality Assurance: The product is generally well-regarded for its quality and accurate description.
- Pre-wired Convenience: The pre-attached wires simplify installation, making it easier to integrate into projects.
Warranty & Support
For any issues or questions regarding your DIANQI 12mm Ultra Short Push Button Switch, please contact the seller or manufacturer directly. Keep your purchase records for warranty claims. Specific warranty terms may vary by region and seller.