Introduction
Thank you for choosing the KEVANLY 6 LED Motorcycle Headlight. This product is designed as a high-performance auxiliary lighting solution for motorcycles, scooters, and various other vehicles. It provides bright, clear illumination for enhanced visibility and safety. This manual contains important information regarding the safe installation, operation, and maintenance of your new LED headlights.
Important Safety Information
Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Keep the device and its cord out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
- Do not expose to water or moisture (for electrical products).
- Handle with care to avoid cuts or injuries (if applicable).
Warning: Installation must comply with local vehicle modification regulations. This product cannot replace core vehicle warning/lighting functions. The manufacturer assumes no liability for light damage or vehicle issues resulting from circuit failure or improper installation.
Product Specifications
Detailed specifications and 2-wire combination for the LED headlight.
| Feature | Detail |
|---|---|
| Product Name | Motorcycle Light Bulb / Auxiliary Lamp |
| Brand Name | KEVANLY |
| Material | PC + LED |
| Light Source | LED (6 SMD per unit) |
| Color Temperature | 6000K (White Light) |
| Voltage | 12V-30V DC (Suitable for 12V DC motorcycle circuits) |
| Lumens | 3000 lm |
| Lifespan | 50,000 hours |
| Waterproof Rating | IP67 |
| Working Temperature | -40°C to 185°C |
| Wiring | 2-wire combination (Red: Positive, Black: Negative) |
| Dimensions (approx.) | 5.65 cm (2.22 in) width, 6.36 cm (2.50 in) height |
| Applicable Parts | Replacement of original headlights, turn signals, side lights/position lights |
| Application | Motorcycles, Scooters, Off-road vehicles, Boats, Excavators, Forklifts, ATVs, Trailers/Trucks, Cranes, Jeeps/4x4s |
Approximate dimensions of the LED headlight unit.
Installation Guide
This motorcycle light bulb is a replacement for the original vehicle and is compatible with mainstream motorcycle original lamp sockets. It is designed for easy installation and can directly replace original car halogen bulbs.
Installation Steps:
- Prepare for Installation: Before beginning, turn off the motorcycle power and remove the vehicle key. This ensures the circuit is completely cut off and prevents short circuits.
- Access the Bulb: Remove the lamp housing or protective plate corresponding to the bulb you are replacing.
- Remove Old Bulb: Carefully pinch the base of the original car light bulb. Rotate it counterclockwise or directly pull it out to remove it from its socket.
- Install New LED Headlight: Hold the base of the new LED headlight (avoid touching the light-emitting surface). Align the product with the socket interface. Rotate clockwise or directly plug it in to ensure good electrode contact.
- Test Functionality: Power on the motorcycle and test the lighting function of the newly installed LED headlight.
- Final Assembly: After confirming that there are no faults and the light operates correctly, reinstall the lamp housing or protective plate to complete the installation.
Installation Precautions:
- Voltage Compatibility: Only for use in 12V DC motorcycle circuits. It is strictly prohibited to connect to 24V or other non-compatible voltages to avoid burning out the light bulb.
- Handling: Do not touch the illuminated surface during installation or replacement. Fingerprints and oil stains can affect transparency and service life. If touched, wipe it clean with a dust-free cloth.
- Temperature: The surface of the light bulb becomes hot after operation. It is forbidden to touch it immediately. Replacement should be done only after the light bulb has completely cooled down to avoid burns.
- Force: During installation, avoid using excessive force to prevent damage to the lamp holder buckle or bulb electrode. Ensure that the interface is tightly clamped and not loose, to prevent poor contact from causing faults.
- Regulations: Always comply with local traffic regulations and prohibit unauthorized modifications to the vehicle's lighting system.
Key features highlighting the six lamp bead design, durable PC material, and external installation suitability.
Operation
Once properly installed, the KEVANLY 6 LED Motorcycle Headlight operates in conjunction with your vehicle's existing lighting controls. Simply turn on your motorcycle's headlight or auxiliary light switch to activate the LED lamps.
- Activation: Use your motorcycle's standard light switch to turn the headlights ON/OFF.
- Beam Pattern: These lights provide a focused beam for improved forward visibility.
- Usage: Suitable for use as primary headlights, auxiliary spotlights, fog lights, or work lights depending on your vehicle's setup and local regulations.
Video demonstration of the KEVANLY LED headlight, showing its design, light output, and performance on a vehicle.
The KEVANLY 6 LED Motorcycle Headlights providing bright illumination.
Care and Maintenance
The KEVANLY 6 LED Motorcycle Headlights are designed for durability and minimal maintenance. Follow these simple guidelines to ensure optimal performance and longevity:
- Cleaning: Periodically clean the lens with a soft, damp cloth to remove dirt, dust, or road grime. Avoid abrasive cleaners or solvents that could damage the lens material.
- Inspection: Regularly check the mounting brackets and wiring connections to ensure they are secure and free from corrosion or damage.
- Avoid Impact: While durable, avoid direct impacts to the light housing or lens, which could cause damage.
- Water Exposure: The lights are IP67 waterproof, meaning they are protected against dust and can withstand immersion in water up to 1 meter for 30 minutes. However, avoid prolonged submersion or high-pressure water jets directly on the lights.
Troubleshooting
If you experience issues with your KEVANLY 6 LED Motorcycle Headlights, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on |
|
|
| Light flickers or is dim |
|
|
| Water inside the lens |
|
|
User Tips
- Mounting Hardware: While the product comes with a holder, ensure you have appropriate screws or bolts for your specific mounting location, as these are typically not included.
- Wiring: Double-check all wiring connections to ensure a secure and reliable electrical contact for consistent performance.
- Affordability: Users have noted that purchasing during promotions can offer excellent value for this product.
Compliance Information
This product complies with the General Product Safety Regulation (GPSR) of the European Union, the Low Voltage Directive (2014/35/EU), the Electromagnetic Compatibility Directive (2014/30/EU), the ROHS Environmental Directive (2011/65/EU), and the vehicle light signal device standard ECE R48. All certification documents are authentic and valid, consistent with the product information.
Warning: Installation must comply with local vehicle modification regulations. This product cannot replace core vehicle warning/lighting functions. The manufacturer assumes no liability for light damage or vehicle issues resulting from circuit failure or improper installation.
Warranty and Support
For warranty information, technical support, or any inquiries regarding your KEVANLY 6 LED Motorcycle Headlight, please refer to your purchase documentation or contact the seller directly. Keep your proof of purchase for any warranty claims.