SINOHAMM Solar Powered Voice Announcer

Contents

SINOHAMM Solar Powered Voice Announcer Instruction Manual

Model: Solar Powered Voice Announcer

Introduction

Thank you for choosing the SINOHAMM Solar Powered Voice Announcer. This device is a versatile motion-activated security solution designed for various environments, including homes, gardens, construction sites, and industrial areas. It features solar and Type-C charging, a loud alarm, multiple working modes, and a recordable voice function for customized messages. Please read this manual carefully to ensure proper installation and operation.

Safety Information

⚠ WARNING: BATTERY SAFETY

  • Risk of electric shock. Do not open, disassemble, or modify the product. Contact with internal components may cause severe injury or death.
  • This product must be installed in accordance with national electrical regulations. If unsure, consult a qualified electrician.
  • Do not cover the light source or lamp shade. Overheating may cause fire risk.
  • Do not exceed the maximum voltage specified for the lamp.
  • This product is suitable for indoor use only. Do not expose to rain, moisture, or damp environments.
  • This product complies with the EU Low Voltage Directive (2014/35/EU) and Electromagnetic Compatibility Directive (2014/30/EU).

⚠ NOT A TOY

  • This is a lighting device, not a toy. Not suitable for children under 36 months.
  • Adult supervision is required when used around children to prevent accidental injury or battery ingestion.

⚠ Disposal Information

  • Do not dispose of this product as unsorted municipal waste. Take it to a designated collection point for electrical and electronic waste recycling in accordance with local regulations.

Product Overview

Diagram showing the components of the Solar Powered Voice Announcer and its remote control.
Figure 1: Device and Remote Control Components

The device consists of a solar charging panel, speaker, detection window, and alarm lights. The remote control allows for various functions including arming, disarming, SOS, volume control, mode selection, sensitivity adjustment, and voice switching.

Device Components:

  • Solar Charging Panel: Converts sunlight into electrical energy to charge the built-in battery.
  • Speaker: Emits alarm sounds and voice messages.
  • Detection Window: Houses the motion sensor for detecting movement.
  • Alarm Lights: Visual indicator for alarms and status.
  • Installation Bracket Groove: For fixed installation.
  • Power Button: Long press for 3 seconds to turn on/off. Short press to switch working modes. Long press for 3 seconds to adjust voice volume.

Remote Control Functions:

  • Arm (Lock icon): Activates the alert mode.
  • Disarm (Unlock icon): Deactivates the alert mode.
  • SOS: Activates emergency alarm.
  • High Volume: Increases the volume.
  • Low Volume: Decreases the volume.
  • 24-hour Working Mode (24 icon): Sets the device to operate continuously.
  • Daytime Working Mode (Sun icon): Sets the device to operate during the day.
  • Night Working Mode (Moon icon): Sets the device to operate during the night.
  • High Sensitivity: Increases motion detection sensitivity.
  • Low Sensitivity: Decreases motion detection sensitivity.
  • Voice Switching: Cycles through available voice messages.

Specifications

Image showing the dimensions of the Solar Powered Voice Announcer and its remote control.
Figure 2: Product Dimensions
FeatureDescription
Charging MethodSolar Charging / Type-C Charging
Solar Charging Time> 24 hours (sun exposure)
USB Charging Time> 8 hours
Alarm Sound Level≤ 120dB
Detection Angle110 degrees
Detection Distance≤ 5 meters (may be influenced by environmental factors)
Built-in Battery1000mAh (18650 battery)
Remote Control Distance≤ 5 meters (straight-line distance)
Voice Modes8 pre-set modes + DIY voice input
Waterproof RatingIP65 (Dust and waterproof)
SOS FunctionYes
Power SourceSolar
Voltage6 V
Light SourceLED bulbs
CertificationCE, ROHS
DimmableNo
Solar Cell TypeNi-MH
Body MaterialABS
Use CaseEmergency
Installation MethodSelf-contained
Batteries IncludedYes
Product Dimensions (H x W x D)13.5cm (5.314in) x 7.95cm (3.129in) x 6.1cm (2.401in)
Remote Dimensions (H x W x D)8.55cm (3.366in) x 3.95cm (1.555in) x 0.65cm (0.255in)
Product Weight0.4 kg

Setup

1. Charging the Device

Image showing the solar panel and USB-C charging port of the device.
Figure 3: Two Charging Modes
  • Solar Charging: Install the device outdoors in a location where there is no shadow and direct sunlight can reach the solar panel. Solar charging takes approximately >24 hours for a full charge.
  • Type-C Charging: For faster charging or during prolonged cloudy/rainy days, use the Type-C charging port. This ensures continuous operation. USB charging takes approximately >8 hours for a full charge.

2. Powering On/Off

Video 1: Product demonstration including power on and mode switching.
  • To power on the device, long press the button on the back of the product for 3 seconds. The device will emit a "Welcome to use this system" voice prompt.
  • To power off the device, long press the button on the back of the product for 3 seconds again.

3. Fixed Installation

Side view of the device showing the installation groove.
Figure 4: Device side view with installation groove.
  • Use the provided screws and wall plugs to securely mount the installation bracket to a desired surface.
  • Align the device's installation bracket groove with the mounted bracket and slide it into place until it clicks securely.
  • Ensure the device is positioned to cover the desired detection area, considering the 110-degree detection angle and 5-meter range.

Operating Instructions

1. Working Modes

Diagram illustrating the three working modes: 24-hour, Daytime, and Night.
Figure 5: Three Working Modes

The device offers three distinct working modes, which can be switched using the button on the back of the product (short press) or the remote control.

  • Mode 1: 24-hour Working Mode (All Day Alarm Mode)
    • The device will detect motion and trigger an alarm both during the day and at night.
    • Select this mode by pressing the '24' button on the remote control.
  • Mode 2: Daytime Working Mode (Daytime Alarm Mode)
    • The device will only detect motion and trigger an alarm during daylight hours. It will not activate at night.
    • Select this mode by pressing the 'Sun' icon button on the remote control.
  • Mode 3: Night Working Mode (Night Alarm Mode)
    • The device will only detect motion and trigger an alarm during nighttime hours. It will not activate during the day.
    • Select this mode by pressing the 'Moon' icon button on the remote control.

2. Arming and Disarming

  • Arm: Press the "Arm" (lock icon) button on the remote control to enter the alert mode. When motion is detected, the device will broadcast a voice message.
  • Disarm: Press the "Disarm" (unlock icon) button on the remote control to release the device from alert mode. No voice will be played when sensing human movement in this mode.

3. Adjusting Volume and Switching Voice

Image showing the device and remote, highlighting 8 voice contents, 3 volume levels, and 5 LED indicators.
Figure 6: Voice and Volume Features
  • Use the "High Volume" and "Low Volume" buttons on the remote control to adjust the sound level.
  • The device has 8 pre-set voice modes. Press the "Voice Switching" button on the remote control to cycle through these options.

4. DIY Voice Input (Recordable Voice)

Image showing the device connected to a laptop via USB for voice replacement.
Figure 7: Easy Voice Replacement / Recordable Voice

The device supports DIY voice input, allowing you to record and use your own custom messages. Connect the device to a computer via the Type-C port to manage and upload voice files. Refer to the detailed instructions in the PDF user manual for specific steps on recording and uploading custom voice messages.

5. SOS Function

  • Press the "SOS" button on the remote control to activate an emergency alarm.

Maintenance

  • Cleaning: Regularly wipe the solar panel with a soft, damp cloth to ensure maximum charging efficiency. Keep the detection window clear of dust and debris.
  • Water Resistance: The device is IP65 rated, meaning it is protected against dust and low-pressure water jets. While it is designed to withstand wind and rain, avoid submerging it in water or exposing it to high-pressure water.
  • Battery Care: For optimal battery life, ensure the device receives adequate sunlight for solar charging. If stored for extended periods, ensure it is fully charged.

Troubleshooting

ProblemPossible Cause / Solution
Device not powering on.Battery may be depleted. Charge via solar panel (ensure direct sunlight) or Type-C cable. Ensure the power button is long-pressed for 3 seconds.
No voice broadcast when motion is detected.
  • Check if the device is in "Disarm" mode. In this mode, induction does not broadcast voice.
  • Ensure the device is in an active working mode (24-hour, Daytime, or Night) and "Arm" mode.
  • Check volume settings.
Device not working at night (in Daytime Mode).This is normal operation for "Daytime Working Mode". Switch to "24-hour Working Mode" or "Night Working Mode" for nighttime alerts.
Device not working during the day (in Night Mode).This is normal operation for "Night Working Mode". Switch to "24-hour Working Mode" or "Daytime Working Mode" for daytime alerts.
Remote control not responding.
  • Ensure the remote control is aligned with the product for operation.
  • Check the remote control battery.
  • Ensure you are within the 5-meter remote control distance.
Detection range seems shorter than expected.Environmental factors and detection angles can influence the detection distance. Ensure no obstructions and adjust sensitivity if needed.

User Tips

  • The alarm sound is quite loud (up to 120dB), which is effective for deterring intruders or animals.
  • Utilize the DIY voice input feature to record custom messages like "Private property, no trespassing!" for personalized security alerts.
  • For continuous operation during periods of low sunlight, remember to use the Type-C charging option.

Warranty and Support

This product comes with a 1-year warranty from the date of purchase.

For detailed instructions, including advanced features and troubleshooting, please refer to the official user manual PDF. A digital copy of the user manual is available for download from the product's support page.

If you encounter any issues or require further assistance, please contact SINOHAMM customer support.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.