1. Product Overview
The iPega PG-9187 is a versatile 6-in-1 charging dock designed specifically for Nintendo Switch Joy-Con and Pro controllers. This compact and ingeniously designed station allows for simultaneous charging of up to four Joy-Con controllers and two Pro controllers, ensuring your gaming accessories are always ready for action.


Key Features:
- Compatible with original N-Switch Dock for power input.
- Simultaneously charges up to 4 Joy-Con controllers and 2 Pro controllers.
- Equipped with a USB 2.0 male plug for power input from the N-Switch Dock.
- Features extended USB 2.0 sockets for communication and convenient storage for Joy-Con wrist straps.
- Colorful indicator icons provide real-time charging status at a glance.
2. Setup Instructions
- Connect to Power Source: Connect the charger's USB 2.0 male plug to the original Nintendo Switch Dock to provide power input to the charging station.
- Power-On Indication: Once powered on, the 'iPega' logo icon on the charging dock will illuminate white, and the gamepad indicator icons will show green, indicating standby mode.


3. Operating Instructions
- Charging Controllers: Insert your Joy-Con or Pro controllers into their respective charging slots on the dock.
- Charging Status: When a controller is correctly inserted and charging, its corresponding indicator icon will turn red. Once fully charged, the indicator will turn green.
- Extended USB Ports: The dock extends two USB 2.0 ports, which can be used for communication with other devices or for storing Joy-Con wrist straps.

Product Demonstration Video:
4. Specifications
| Parameter | Value |
|---|---|
| Input Voltage/Current | DC5V/2.0A |
| Joy-Con Charging Time | Approximately 3 hours |
| Pro Controller Charging Time | Approximately 4.5 hours |
| Compatible Devices | Nintendo Switch Joy-Con, Nintendo Switch Pro Controller |
| Connectivity | USB 2.0 Male Plug (for power input), 2x USB 2.0 Female Sockets (for extension/communication) |
5. Maintenance and Care
- Storage: Do not store this product in wet or high-temperature areas to prevent damage.
- Handling: Avoid striking, beating, dropping, piercing, or attempting to disassemble the product. Such actions can cause unnecessary damage and void the warranty.
- Cleaning: Use a soft, dry cloth to clean the surface of the charging dock. Do not use harsh chemicals or abrasive materials.
6. Troubleshooting
- No Power/Indicators Off: Ensure the USB 2.0 male plug is securely connected to the original N-Switch Dock and that the dock itself is powered on. Check for any loose connections.
- Controller Not Charging (Red Light Not On): Verify that the controller is correctly seated in its charging slot. Remove and re-insert the controller. Ensure the charging dock has power (white iPega logo should be lit).
- Slow Charging: Confirm that the power source (N-Switch Dock) is providing adequate power. Avoid using damaged cables or non-standard power adapters.
- Interference with Other Devices: If experiencing issues with devices connected to the extended USB 2.0 ports, try disconnecting and reconnecting them. Ensure the devices are compatible with USB 2.0.
7. User Tips
- For optimal charging speed, ensure your Nintendo Switch Dock is connected to its original power adapter.
- Utilize the extended USB ports for charging other small USB-powered accessories or for data transfer if supported by the connected device.
- Keep the charging slots free of dust and debris to ensure proper contact with the controllers.
8. Warranty and Support
This product is manufactured by iPega. Non-professional personnel should not disassemble the product. Any unauthorized disassembly will void the warranty service.
iPega trademarks belong to IPEGA LIMITED.
Patent No.: ZL201930472568.7
Accessories Included:
- 1x Charging Dock
- 1x User Manual