1. Introduction
The HSmartcam HD CVI/TVI/AHD Video Balun Transceiver, also known as a UTP balun, is designed to replace traditional coaxial cable with Category 5 (CAT5) or other twisted pair wiring for CCTV video camera and surveillance installations. This allows for more cost-effective structured cabling techniques, enabling UTP wire to be run over longer distances than coaxial cable. These passive baluns do not require external power and are compatible with various high-definition video formats.
2. Safety Information
Important Safety Information: Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Keep the device and its cord out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
- Do not expose to water or moisture.
This product is CE certified, indicating compliance with European safety, health, and environmental protection requirements.
3. Product Features
- Video transmission via UTP CAT5 cable.
- 10-20% wire costs saved compared to coaxial cable.
- Full-motion CCTV video transmission at distances up to 1000ft (300m).
- Outstanding interference rejection and transient protection.
- Male BNC connectors allow direct connection to the camera or DVR.
- No external power required (passive design).
- Constructed from durable ABS Plastic.
- Features gold-plated pure copper contact cores for stable video image transmission with minimal loss.
- Equipped with spring-type clamp terminals for easy installation and maintenance.
- Utilizes PVC raw wire for environmental protection, flame retardancy, and resistance to oxidation and sun exposure.
4. Package Contents
Each package typically includes:
- 4 pairs (8 pieces) of Video Balun Transceivers for CCTV security cameras.
5. Specifications
| Parameter | Value |
|---|---|
| Product Name | PASSIVE TWISTED PAIR TRANSMITTER |
| Transmission Distance | 0-300m |
| Transmission Wire | UTP CAT5/5E/6 |
| Interface Type | BNC-M |
| Compatible Format | AHD/CVI/TVI/CVBS |
| Compatible with Pixel | 720P/960P/1080P |
| Outer Shell Material | ABS |
| Net Weight | 0.06KG |
6. Setup and Installation
The HSmartcam Video Balun Transceiver is designed for straightforward installation. Follow these steps to connect your CCTV camera to a monitor or DVR using UTP cable:
- Prepare UTP Cable: Obtain a UTP CAT5, CAT5E, or CAT6 cable of the required length (up to 300m).
- Connect to Camera: Connect one end of the UTP cable to the spring-type clamp terminals of one video balun. Ensure proper polarity (+ and -) as indicated on the balun. The male BNC connector of this balun then connects directly to the BNC output of your CCTV camera.
- Connect to Monitor/DVR: Connect the other end of the UTP cable to the spring-type clamp terminals of the second video balun. Again, ensure correct polarity. The male BNC connector of this second balun then connects directly to the BNC input of your monitor or DVR.
- Verify Connection: Ensure all connections are secure and that the UTP cable is properly terminated at both ends.
The diagram illustrates a camera connected to a monitor via two passive twisted pair transmitters (video baluns) using a UTP CAT5/5E/6 cable. The maximum transmission range is 0-300 meters.
7. Operating Instructions
As a passive device, the video balun operates automatically once correctly installed. It converts the video signal from coaxial to twisted pair and back, allowing for extended transmission over UTP cable without requiring external power.
- Ensure all connections are firm to prevent signal loss or interference.
- No configuration or power supply is needed for the baluns themselves.
- The quality of the UTP cable significantly impacts video transmission quality and distance. Use high-quality CAT5/5E/6 cable for optimal performance.
8. Maintenance
The HSmartcam Video Balun Transceiver requires minimal maintenance:
- Cleaning: Keep the baluns clean and free from dust. Use a dry, soft cloth for cleaning.
- Environmental Conditions: Avoid exposing the baluns to extreme temperatures, humidity, or direct sunlight.
- Connection Integrity: Periodically check the BNC and UTP cable connections to ensure they remain secure.
- Cable Inspection: Inspect the UTP cable for any physical damage, especially if installed outdoors or in areas prone to wear and tear.
9. Troubleshooting
If you encounter issues with your video balun installation, consider the following troubleshooting steps:
- No Video Signal:
- Check all BNC and UTP cable connections for tightness and correct polarity.
- Ensure the UTP cable is not damaged or broken.
- Verify that the camera and monitor/DVR are powered on and functioning correctly.
- Confirm that the video format (AHD/CVI/TVI/CVBS) is compatible with your equipment.
- Poor Video Quality (Flickering, Distortion, Noise):
- Check for loose connections.
- Ensure the UTP cable is of good quality and meets CAT5/5E/6 standards.
- Verify that the transmission distance does not exceed 300m. For longer distances, active baluns may be required.
- Check for strong electromagnetic interference (EMI) sources near the UTP cable.
- Ensure the UTP cable is not running parallel to high-voltage power lines.
- Intermittent Signal:
- Inspect the UTP cable for kinks, cuts, or damage.
- Re-terminate the UTP cable connections at the baluns if necessary.
10. User Tips
- Ease of Installation: Users have reported that these baluns are easy to install and work perfectly upon setup.
- Quality: Despite being lightweight, the baluns are noted for their good quality and effective performance.
- Check Compatibility: Always ensure your camera and DVR/monitor support the AHD/CVI/TVI/CVBS formats and pixel resolutions (720P/960P/1080P) that these baluns are compatible with.
- Cable Management: Proper cable management can prevent damage and ensure consistent signal quality.
11. Warranty and Support
For warranty information, technical support, or service inquiries, please contact the manufacturer, Shenzhen Xinchi Technology Co., Ltd., or their EU Authorized Representative, eVatmaster Consulting Gmbh. Contact details are typically provided with the product packaging or on the manufacturer's official website.
Manufacturer: Shenzhen Xinchi Technology Co., Ltd.
EU Authorized Representative: eVatmaster Consulting Gmbh Raiffeisen Street2B11, 63110 Rodgau, Hessen, Germany
Email: contact@evatmaster.com
Phone: +496995179070