1. Introduction
This manual provides essential information for the safe and efficient use of your COXO Ultra Thin Dimmable LED Driver. Please read this manual thoroughly before installation and operation, and keep it for future reference.
Figure 1: Range of COXO Ultra Thin Dimmable LED Driver models.
The COXO DS Series LED Drivers are designed for various LED lighting applications, offering stable DC12V or DC24V output with power options from 60W to 400W. Key features include an ultra-thin design, fanless operation for silent performance, efficient heat dissipation through an aluminum casing, and multiple safety protections. These drivers also feature a dip switch for adjusting brightness levels from 40% to 100%.
2. Safety & Warnings
- To ensure personal safety and reduce interference, make sure the indoor safety grounding wire is reliably connected to the earth.
- Inspect the product before each use; do not use if damaged.
- Keep the power supply or adapter and its cord out of reach of children.
- Do not expose to water or moisture unless it's a waterproof model.
- Do not disassemble or modify the device. If the device is damaged or malfunctions, please stop using it immediately.
- Whenever you plan to touch the device, please cut off the electricity first.
3. Specifications
Figure 2: Ultra-thin profile (31-33mm) and fanless design.
| Parameter | Value |
|---|---|
| Input Voltage | AC 176-264V (Note: Not suitable for 110-120V mains without a step-up transformer) |
| Output Voltage | DC 12V / 24V (selectable by model) |
| Output Power | 60W, 100W, 150W, 200W, 300W, 400W |
| Shell Material | Metal case / Aluminum case |
| Features | Ultra Thin, No Fan, No Noise, Dip Dimming (40%-100% in 4 levels), High Efficiency Heat Dissipation |
| Working Temperature | 0~45℃ |
| Storage Temperature | -20~60℃ |
| Ambient Humidity | 0~95% Non-Condensation |
| Certification | CCC, CE, ROHS |
| Warranty | 1 Year |
Figure 3: Comprehensive electrical specifications and dimensions for various models.
Figure 4: Detailed dimensions and electrical parameters for each wattage variant.
4. Installation and Wiring
Before installation, ensure the power supply is disconnected from the mains. Verify that the working voltage and maximum power of your LED device are compatible with the LED driver. The device's DC-input voltage should match the output voltage of the power supply. The device's maximum power draw should be equal to or less than the maximum power of this power supply.
4.1 Wiring Instructions
Figure 5: Input (AC) and Output (DC) wiring terminals.
- Input Connection (AC):
- Connect the Live wire to the 'L' port of the power supply.
- Connect the Neutral wire to the 'N' port.
- Connect the Ground wire to the '⏚' port.
- Output Connection (DC):
- Connect 'V+' to the positive pole of the LED strip or controller.
- Connect 'V-' to the negative pole.
4.2 Power Supply Structure
Figure 6: Internal block diagram of the power supply structure.
5. Operating Instructions
5.1 Slow Start Function
The LED driver features a slow start function. When powered on, the light will gradually illuminate to full brightness over a short period. This protects the power supply and extends the lifespan of the connected LED components.
5.2 Dip Dimming Function
The driver includes a dip switch for adjusting the output brightness. This allows you to set the desired brightness level from 40% to 100% in four fixed increments.
Figure 7: Dip switch configuration for brightness adjustment.
Refer to the diagram above and the table below for setting the dip switches:
| Brightness Level | Dip Switch 1 (Slow Start) | Dip Switch 2 | Dip Switch 3 | Dip Switch 4 |
|---|---|---|---|---|
| 100% Brightness | ON | OFF | OFF | OFF |
| 80% Brightness | ON | ON | OFF | OFF |
| 60% Brightness | ON | OFF | ON | OFF |
| 40% Brightness | ON | ON | ON | OFF |
Figure 8: Dip switch settings and their effect on brightness.
Video 1: Demonstration of the slow start and dip dimming functions.
6. Maintenance
The COXO Ultra Thin Dimmable LED Driver is designed for long-term, reliable operation with minimal maintenance. To ensure optimal performance and longevity:
- Keep the unit clean and free from dust and debris.
- Ensure adequate ventilation around the unit. The aluminum casing is designed for heat dissipation, so do not obstruct the ventilation holes.
- Avoid exposing the unit to extreme temperatures or humidity.
- Do not attempt to open or repair the unit yourself. This will void the warranty and could lead to electric shock.
Figure 9: Aluminum case with honeycomb design for efficient heat dissipation.
7. Troubleshooting
- No Light Output:
- Check all wiring connections (input and output) for secure contact.
- Verify that the input AC voltage (176-264V) is correct for your region. This driver is not designed for 110-120V mains without a step-up transformer.
- Ensure the LED strip's voltage and wattage are compatible with the driver.
- Check if the LED strip itself is functional.
- Incorrect Brightness/Dimming Issues:
- Ensure the dip switches are set correctly according to the desired brightness level (refer to Section 5.2).
- Some users have reported the dimmer working in fewer positions than described; double-check the physical switch positions.
- Slow Start Function Behavior:
- The slow start function causes a slight delay (approx. 2 seconds) before full brightness is reached. This is normal operation and not adjustable. Consider this if using with motion sensors.
- Unit Not Working / Defective:
- If the unit never worked or appears broken, discontinue use immediately.
- Contact customer support for assistance or warranty claims.
Figure 10: Built-in safety protections including over voltage, over current, short circuit, and over temperature protection.
8. User Tips
- This driver is an excellent choice for dimming LED strips directly from the unit, especially if you need to reduce overall brightness without external dimmers.
- The aluminum casing is effective at dissipating heat, contributing to the unit's silent operation and longevity.
- Ensure your LED strip's wattage is well within the driver's capacity to prevent overheating and ensure stable performance.
9. Frequently Asked Questions (FAQ)
- Q: How are US purchases using these when the AC voltage is for 220V?
- A: The input voltage for this driver is AC 176-264V. For regions with 110-120V mains, a step-up transformer would be required to use this product, or it is not suitable for direct connection.
- Q: Can the power supply give 18V with other sequence of switches?
- A: No, the output voltage is fixed at either DC 12V or DC 24V, depending on the specific model purchased. The dip switches are only for brightness adjustment, not voltage output.
- Q: How can I adjust the slow turn-on time?
- A: The slow turn-on (slow start) function is a built-in feature for protection and is not user-adjustable.
10. Warranty & Support
This product comes with a 1-year warranty from the date of purchase. For warranty claims, technical support, or any inquiries, please contact the manufacturer or your retailer.
Manufacturer: Shenzhen Coxo Technology Co., Limited
Email: u@coxotech.com
EU Representative (KD EUROPE):
- Address: Stara Debszczyzna 4, 16-424, Filipow, PL
- Email: Kdeurope.office@gmail.com
- Tel: +48 510181779
11. Compliance Information
This device complies with relevant European directives and standards. It bears the following marks:
CE RoHS
Made in China