Dynoracing BX101871/1872/1873

Contents

Dynoracing Universal Gear Shift Knob Instruction Manual

Model: BX101871/1872/1873

Brand: Dynoracing

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Dynoracing Universal Gear Shift Knob. This high-quality aluminum shift knob is designed for manual transmission vehicles and is available in 90mm, 130mm, and 180mm lengths with various finishes including Neo Chrome, Bluing, and Gilding. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product.

Dynoracing Universal Gear Shift Knobs in 180mm, 130mm, and 90mm lengths, all with a bluing and gilding finish.
Figure 1: Overview of Dynoracing Universal Gear Shift Knobs in various lengths (90mm, 130mm, 180mm) and bluing/gilding finish.

2. Safety Information

⚠ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Professional installation is highly recommended for optimal safety and performance. Always ensure the shift knob is securely fastened before operating your vehicle.

3. Package Contents

Your Dynoracing Universal Gear Shift Knob package should include the following items:

  • 1 x Gear Shift Knob (available in 90mm, 130mm, or 180mm length, depending on your selected model)
  • 3 x Threaded Adapters (typically with inner diameters of 7mm, 9mm, and 11mm)
Close-up view of a 90mm bluing and gilding shift knob, showing its internal threading and three included black threaded adapters.
Figure 2: Close-up of a 90mm shift knob, illustrating the internal threading and the three included adapters.

4. Specifications

Feature Detail
Product Type Modified Parts
Material Aluminum
External Testing Certification CE
Available Lengths 90mm, 130mm, 180mm
Width Approximately 33mm
Included Adapter Sizes 7mm, 9mm, 11mm (inner diameter)
Package Dimensions (L x W x H) 27cm x 18cm x 4cm
Package Weight 0.148 kg

Dimensional Diagrams:

Diagram showing the dimensions of the 90mm shift knob, which is 33mm wide, and the three included adapters with 7mm, 9mm, and 11mm inner diameters.
Figure 3: Dimensions for the 90mm shift knob and its corresponding adapters.
Diagram showing the dimensions of the 130mm shift knob, which is 33mm wide, and the three included adapters with 7mm, 9mm, and 11mm inner diameters.
Figure 4: Dimensions for the 130mm shift knob and its corresponding adapters.
Diagram showing the dimensions of the 180mm shift knob, which is 33mm wide, and the three included adapters with 7mm, 9mm, and 11mm inner diameters.
Figure 5: Dimensions for the 180mm shift knob and its corresponding adapters.

5. Setup and Installation

Follow these steps to install your new gear shift knob. A visual diagram is typically included in the product packaging to assist with these steps.

  1. Remove the original shift head: Carefully unscrew or detach the existing shift knob from your vehicle's gear stick.
  2. Choose the right adapter: Select the appropriate threaded adapter from the provided set that best fits the diameter of your vehicle's gear stick. The included adapters typically have inner diameters of 7mm, 9mm, and 11mm.
  3. Tighten the screws to the firm: Place the chosen adapter onto the gear stick. Then, thread the Dynoracing Gear Shift Knob onto the adapter. Rotate clockwise until it is securely fastened.
  4. Installation is completed: Ensure the shift knob is firmly attached and does not wobble. Test the gear shifting motion while the vehicle is stationary to confirm proper installation.

6. Operation

Once installed, operate the gear shift knob as you would your original shift knob. Ensure a firm grip and smooth, deliberate movements when shifting gears to prevent damage to the transmission or the shift knob itself.

7. Maintenance

To maintain the appearance and longevity of your aluminum gear shift knob, follow these simple care instructions:

  • Cleaning: Clean regularly with a soft, damp cloth.
  • Avoid Harsh Chemicals: Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the finish (Neo Chrome, Bluing, Gilding).
  • Check Tightness: Periodically check the tightness of the shift knob and adapter to ensure it remains securely attached to the gear stick. Re-tighten if any looseness is detected.

8. Troubleshooting

Common Issues and Solutions

Issue: Shift knob feels loose after installation.

  • Solution 1: Ensure the correct adapter size was selected and fully threaded onto the gear stick.
  • Solution 2: Tighten the shift knob firmly onto the adapter. If it continues to loosen, consider using a thread-locking compound (not included) for added security, following the compound manufacturer's instructions.

Issue: Shift knob does not fit the vehicle's gear stick.

  • Solution 1: Verify that you have selected the correct adapter from the provided set (7mm, 9mm, 11mm).
  • Solution 2: Measure the diameter of your vehicle's gear stick to ensure compatibility with the included adapter sizes. If none fit, you may need to source an alternative adapter compatible with both your vehicle and the shift knob's threading.

9. User Tips

Insights from other users can help enhance your experience:

  • Sim Racing Compatibility: Some users have successfully adapted this shift knob for sim racing equipment. Be aware that custom solutions or additional adapters might be required for a perfect fit with non-standard setups like the Thrustmaster TH8S shifter.
  • Adapter Fit: Always double-check the fit of the adapters. If the provided adapters do not fit your specific application, alternative solutions may be needed.

10. Warranty and Support

For any questions, concerns, or support regarding your Dynoracing Universal Gear Shift Knob, please contact the seller or manufacturer directly. Refer to your purchase documentation for specific warranty terms and contact information.

An official user manual in PDF format is available for additional details and can be accessed via the following link: Dynoracing Universal Gear Shift Knob User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.