ZTree Solar Torch Light

Contents

ZTree Solar Torch Light User Manual

Models: 12 LED, 33 LED, 96 LED

Introduction

This manual provides detailed instructions for the safe and efficient use of your ZTree Solar Torch Lights. Please read this manual thoroughly before installation and operation, and retain it for future reference.

⚠ Important Safety Warning

Please be aware of potential fire risks and strictly follow the instructions for charging and storage. For proper disposal of the lithium-ion battery, consult your local authority's website for guidelines on safe disposal in accordance with applicable legal requirements.

Product Features

  • Light Sensing Automatic Control: The torch lights feature automatic charging during the day, automatic lighting at dusk, and automatic extinguishing at dawn. No manual operation is required for daily use.
  • Waterproof Rating IP65: Designed to withstand rain and splashes, making them suitable for complex outdoor weather conditions.
  • Efficient and Energy-Saving: Solar panels have a conversion rate of ≥ 18%, providing continuous illumination for 8-12 hours on a single full charge. Actual duration may vary based on lighting conditions and brightness mode.
  • Dancing Flame Effect: Emulates a realistic flickering flame for decorative ambiance.
Diagram showing daytime solar charging and automatic light at night
Figure 1: Automatic operation with daytime charging and nighttime illumination.
Diagram showing IP65 waterproof, auto on/off, solar powered, energy saving, and dancing flame features
Figure 2: Key features including IP65 waterproof rating and solar power.

Setup and Installation

1. Unpacking and Inspection

Open the packaging and carefully check all components. Ensure that the lamp body, solar panel, and ground rod connections are secure and undamaged.

2. Choosing an Installation Location

  • Select a location where the solar panel can receive at least 6 hours of direct sunlight per day.
  • Avoid areas where trees, buildings, or other sunshades might block sunlight.
  • Keep the lights away from strong artificial light sources (e.g., street lights, courtyard lights) to prevent interference with the light sensing sensor, which could cause the lights to remain off at night.

3. Fixed Installation

  1. Insert the ground pole vertically into soft ground (lawn or soil) to a depth of at least 20cm (approximately 8 inches). This ensures the lamp body is stable and does not shake.
  2. If installing on hard ground (e.g., stone pavement or cement), first drill a hole with a diameter matching the ground rod. Insert an expansion pipe, then insert and fix the ground rod to prevent tipping.
  3. Align the ground plug rod with the installation interface at the bottom of the lamp body. Rotate it clockwise to tighten, or press it into place according to the buckle design, ensuring a firm connection without looseness.

4. Initial Setup

  1. Locate the power switch on the side or bottom of the lamp body and turn it to the "ON" position. Some models may have an "Auto" mode, which activates the automatic light-sensing function.
  2. Remove the protective film from the surface of the solar panel to ensure it can receive sunlight normally for charging.
Solar torch lights used as outdoor camp lights, special time lights, and open-air dining decoration lights
Figure 3: Examples of outdoor usage for the solar torch lights.

Operation

Once installed and the switch is set to "ON", your ZTree Solar Torch Light will operate automatically:

  • During the day, the solar panel will convert sunlight into electricity and store it in the internal battery.
  • At dusk, the light sensor will detect low light levels and automatically turn on the LED torch light, displaying its dancing flame effect.
  • At dawn, as light levels increase, the sensor will automatically turn off the light and resume charging.

Visual Demonstration

Video 1: Demonstration of the dancing flame effect of the ZTree Solar Torch Light.

Maintenance

  • Cleaning: Regularly wipe the solar panel with a soft, damp cloth to remove dust, dirt, or debris. A clean solar panel ensures optimal charging efficiency.
  • Battery Care: The integrated Ni-MH battery is designed for long-term use. If the product is stored for an extended period, ensure it is fully charged before storage and recharged every few months to maintain battery health.
  • Extreme Weather: In case of severe weather conditions such as heavy rainstorms or typhoons, it is recommended to temporarily remove the lamp body and store it indoors. Reinstall once the weather improves to prevent potential damage.

Troubleshooting

Problem Possible Cause Solution
Light does not turn on at night.
  • Switch is OFF.
  • Insufficient sunlight for charging.
  • Solar panel is dirty or obstructed.
  • Strong ambient light interfering with sensor.
  • Battery is depleted or faulty.
  • Ensure the power switch is in the "ON" position.
  • Relocate the light to an area receiving at least 6 hours of direct sunlight daily.
  • Clean the solar panel surface.
  • Move the light away from other strong light sources.
  • Allow several days of full charge. If still not working, contact customer support.
Light duration is shorter than expected.
  • Insufficient charging due to cloudy weather or poor placement.
  • Battery capacity degradation over time.
  • Ensure optimal solar panel exposure to direct sunlight.
  • Consider replacing the battery if it's an older unit and performance has significantly decreased.
Physical damage or broken components upon arrival.
  • Shipping damage.
  • Manufacturing defect.
  • Contact the seller immediately for a replacement or refund.

User Tips

  • For best performance, ensure the solar panel is always clean and free from obstructions.
  • Allow the lights to charge for at least 1-2 full sunny days before first use to ensure the battery is fully charged.
  • If you notice inconsistent performance, double-check the ON/OFF switch and the solar panel's exposure to direct sunlight.
  • Consider the number of LEDs (12, 33, or 96) when choosing your torch lights, as this affects the brightness and overall visual impact.

Specifications

Feature Detail
Brand NameZTree
Power SourceSolar
Light SourceLED bulbs
Is Bulbs IncludedYes
Is Batteries IncludedYes
Solar Cell TypeNi-MH
Voltage1.2V
Protection LevelIP65
Body MaterialABS
Installation MethodSelf-contained (Ground Plug Rod)
UsageHoliday / Outdoor Decoration
CertificationCE, UL
Is DimmableNo
Solar Panel Conversion Rate≥ 18%
Illumination Duration8-12 hours (on full charge)
Recommended Direct Sunlight≥ 6 hours per day
OriginMainland China

Dimensions (Approximate)

Dimensions diagram for 96LED, 33LED, and 12LED models
Figure 4: Product dimensions for different LED count models.
Model Width Height
96 LED12 cm (4.7 in)79 cm (31 in)
33 LED10.5 cm (4.13 in)59 cm (23 in)
12 LED7.5 cm (2.95 in)52 cm (20.5 in)

Safety Warnings and Usage Restrictions

  • Water Immersion: It is strictly prohibited to soak the lamp body in water (e.g., ponds or water accumulation pits). While the product has a waterproof function, prolonged deep water immersion can lead to internal water ingress and short circuits.
  • High Temperature Surfaces: During installation and maintenance, avoid touching the surface of the LED light source, as it can reach high temperatures during operation and cause burns.
  • Disassembly: Do not attempt to disassemble the lamp body, solar panel, or lithium battery yourself. This can damage internal circuits or create safety hazards.
  • Children's Safety: Children should only install or approach the product under adult supervision to prevent injuries from the tip of the ground insertion rod.
  • Indoor Use: This product is not suitable for indoor use; it is designed exclusively for outdoor environments.
  • Temperature and Flammable Areas: Avoid installation in high-temperature environments (such as near heating sources or stoves) or in flammable and explosive areas.
  • Extreme Weather: In the event of extreme weather conditions like heavy rainstorms or typhoons, it is recommended to temporarily remove the lamp body and reinstall it after the weather improves to prevent equipment damage.

Symbol Explanation

Symbol Explanation
CE CE certification indicates that the product meets the safety requirements of EU directives, allowing it to be sold in the European Union and European Free Trade Area markets.
UKCA UKCA (UK Conformity Assessment) is a product conformity mark introduced after Brexit, replacing the EU's CE mark for goods placed on the market in the UK (England, Wales, and Scotland).

Warranty and Support

For any product defects or issues not covered by the troubleshooting guide, please contact the seller or retailer from whom you purchased the ZTree Solar Torch Light. Please have your purchase information ready.

A detailed user manual in PDF format is also available for download: View User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.