1. Introduction
The COOLMOON SK1 ARGB Mini Controller is designed to provide versatile lighting control for your PC components, including case fans, LED strips, and CPU coolers. It offers both remote and manual control options, making it ideal for systems without a dedicated 5V 3-pin ARGB header on the motherboard. This manual provides essential information for safe operation, setup, and maintenance of your controller.
2. General Safety Warnings
Please read and understand all instructions in this manual before using the product. Keep these instructions for future reference and pass them on to any subsequent user.
- This product is intended for household use only. Use it only as described in this manual.
- Do not use the product if it is damaged in any way.
- This product is intended for use by persons aged 18 years and above. It may be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge only if they have been given supervision or instruction and understand the hazards involved.
3. Package Contents
Verify that all items are present and in good condition:

Figure 1: COOLMOON ARGB Controller Kit Components. Includes remote control, ARGB mini controller, SATA power cable, and a 3-way ARGB splitter cable.
- ARGB Mini Controller (Model: SK1)
- Wireless Remote Control
- SATA Power Cable (integrated with controller)
- ARGB Splitter Cable (may vary by package variant, typically 3-way)
4. Setup and Installation
Prepare Your System
Ensure your computer is powered off and unplugged from the wall outlet before beginning installation. Open your PC case to access the internal components.
Connect ARGB Devices
Connect your 5V 3-pin ARGB devices (such as case fans, LED strips, or CPU coolers) to the ARGB Mini Controller. If you have multiple devices, use the provided ARGB splitter cable to connect them to the controller's 5V ARGB male connector.

Figure 2: Close-up of the 5V ARGB male connector on the controller.

Figure 3: Diagram showing connection of the controller to case fans, LED strips, and CPU coolers.
Note: The motherboard does not need to support 5V 3-pin ARGB for this controller to function.
Connect Power
Connect the SATA power connector from the ARGB Mini Controller to an available SATA power cable from your PC's power supply unit (PSU).

Figure 4: The ARGB Mini Controller connected via SATA power, ready for operation.
Secure the Controller
Position the controller in a suitable location within your PC case, ensuring cables are not obstructing airflow or other components. You may use double-sided tape (not included) to secure it.
Final Steps
Close your PC case, plug in the power cable, and power on your computer.
5. Operating Instructions
The COOLMOON SK1 ARGB Mini Controller can be operated using the included wireless remote control or via manual buttons on the controller itself.

Figure 5: The ARGB Mini Controller showing manual control buttons (M/S/C) and remote control.
5.1. Using the Wireless Remote Control
The remote control provides comprehensive control over lighting effects:

Figure 6: Layout of the wireless remote control.
- Power Button (Red): Turns the ARGB lighting on or off.
- Mode Button (M): Cycles through various pre-programmed lighting effects.
- Speed Buttons (+/-): Adjusts the speed of dynamic lighting effects.
- Brightness Buttons (+/-): Adjusts the brightness level of the lighting.
- Color Selection Buttons (R, G, B, W, and color palette): Selects static colors or initiates color cycling modes.
5.2. Using Manual Control Buttons
The controller features three buttons for basic control:
- M (Mode) Button: Cycles through different lighting modes.
- S (Speed/Brightness) Button: Adjusts the speed of dynamic effects or brightness of static colors.
- C (Color) Button: Changes static colors or color patterns.
6. Maintenance
- Keep the controller and remote control in a dry environment.
- Avoid exposing the device to extreme temperatures or direct sunlight.
- Clean the controller and remote with a soft, dry cloth. Do not use liquid cleaners or solvents.
- Ensure proper airflow around the controller to prevent overheating.
7. Troubleshooting
- Lights not turning on:
- Check if the SATA power cable is securely connected to both the controller and the PSU.
- Ensure the 5V 3-pin ARGB devices are correctly connected to the controller.
- Verify the remote control has working batteries and is pointed towards the controller.
- Try pressing the power button on the remote or the manual buttons on the controller.
- Remote control not responding:
- Ensure there are no obstructions between the remote and the controller.
- Check and replace the remote control battery if necessary.
- Try operating the controller using its manual buttons to confirm the controller itself is functional.
- Inconsistent lighting:
- Ensure all ARGB connections are secure and correctly oriented (5V 3-pin).
- Verify that all connected ARGB devices are compatible with 5V 3-pin ARGB standards.
8. Specifications

Figure 7: Dimensions of the COOLMOON SK1 ARGB Mini Controller and its packaging.
| Feature | Detail |
|---|---|
| Model Number | SK1 / ARGB Remote Controller |
| Type | Light Controller/HUB |
| Input Power | SATA Power |
| Output | 5V 3-pin ARGB |
| Controller Dimensions (L x W x H) | 46mm x 22mm x 9.5mm |
| Cable Length | 490mm ± 10% |
| Package Dimensions (L x W x H) | 75mm x 105mm x 24mm |
| Origin | Mainland China |
| Certifications | CE, FC, RoHS |
9. User Tips
- Always ensure correct polarity when connecting 5V 3-pin ARGB devices to avoid damage. The arrow on the ARGB connector usually indicates the 5V pin.
- For optimal remote control performance, ensure a clear line of sight between the remote and the controller.
- Experiment with different lighting modes and speeds to find your preferred aesthetic.
10. Warranty and Support
For warranty information and technical support, please contact your point of purchase or the manufacturer directly. Keep your proof of purchase for warranty claims.
Manufacturer Information:
Manufacturer: HONGKONG MENGYLOGISTICS LIMITED
Address: UNIT 89,3/F.YAULEECENTRENO.45, HOIYUENROAD, KWUN TONGHONGKONG
EU Representative (EC REP):
Company: VALHALLA TAXE
Address: RUE GENERAL DE REFFYE EGD,88000 EPINAL 913 439 188 R.C.S. Epinal
Tel: +33-0629986194
Email: valhallatax@outlook.com