Introduction
Thank you for choosing the VTOMAN FlashSpeed 1000 Portable Power Station. This manual provides essential information for the safe and correct operation, maintenance, and troubleshooting of your device. Please read it carefully before use and retain it for future reference.

Package List
Please check that all accessories are complete upon opening the package. If any parts are missing, please contact customer service.
| No. | Item | Qty. | Specification |
|---|---|---|---|
| 1 | FlashSpeed 1000 Power Station | 1 | 110V/1000W |
| 2 | AC Charging Cable | 1 | / |
| 3 | USB-C to USB-C Cable | 1 | / |
| 4 | USB-A to USB-C Cable | 1 | / |
| 5 | Car Charger Cable | 1 | / |
| 6 | User Manual | 1 | English version |
Safety Instructions
General Usage Precautions
- Read all instructions before using the product.
- Close supervision is necessary when the product is used near children.
- Do not put fingers or hands into the product.
- Use only attachments recommended or sold by the power pack manufacturer to avoid risk of fire, electric shock, or injury.
- To reduce risk of damage to the electric plug and cord, pull the plug rather than the cord when disconnecting.
- Do not use a damaged or modified battery pack or appliance. Damaged batteries may exhibit unpredictable behavior resulting in fire, explosion, or injury.
- Do not operate the power pack with a damaged cord, plug, or output cable.
- Do not disassemble the power pack. Take it to a qualified service person when service or repair is required. Incorrect reassembly may result in fire or electric shock.
- Unplug the power pack from the outlet before attempting any servicing to reduce the risk of electric shock.
Personal Precautions
- Have plenty of fresh water and soap nearby in case battery acid contacts skin, clothing, or eyes.
- Wear complete eye protection and clothing protection. Avoid touching eyes while working near the battery.
- If battery acid contacts skin or clothing, wash immediately with soap and water. If acid enters eyes, immediately flood eyes with running cold water for at least 10 minutes and get medical attention.
- NEVER smoke or allow a spark or flame in the vicinity of the battery or engine.
- Be extra cautious to reduce the risk of dropping a metal tool onto the battery, which might spark or short-circuit and cause an explosion.
- When charging the internal battery, work in a well-ventilated area and do not restrict ventilation.
- Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
- Do not expose the power pack to fire or excessive temperature. Exposure to fire or temperatures above 265°F (130°C) may cause explosion.
- Have servicing performed by a qualified repair person using only identical replacement parts to ensure product safety.
Disposal Guide
The product contains batteries with potentially dangerous chemicals. It is strictly prohibited to dispose of it in ordinary trash cans. Please follow local laws and regulations on battery recycling and disposal.
- If conditions permit, ensure the battery is fully discharged before disposing of it in a designated battery recycling bin.
- If the battery cannot be fully discharged due to a product failure, do not dispose of it directly in the battery recycling box. Contact a professional battery recycling company for further processing.
- Dispose of over-discharged batteries that cannot be recharged.
Specifications
General Information
| Attribute | Value |
|---|---|
| Product Name | FlashSpeed 1000 Power Station |
| Model Number | PB-85 |
| Net Weight | 17KG (37.4 lbs) |
| Dimensions | 393*280*270mm (15.5x11x10.6 inch) |
| Certification | CE, pse, FCC, RoHS, UL, UN38.3 |
| Application | Home Energy |
| Display Screen | Yes |
| Frequency | 60 Hz |
| Pure Sine Wave | Yes |
Battery Information
| Attribute | Value |
|---|---|
| Capacity | 828Wh |
| Battery Type | LiFePO4 |
| Nominal Capacity | >3500mAh |
| Cycle Life | 3000+ Battery Cycles, 3000 cycles to 80% |
| Security Protection Patent | LIFEBMS & 10 protections |
| Service Life | 2 Years |
Output Ports
| Port | Specification |
|---|---|
| AC Output (x3) | 1000W (Peak 2000W) in total, 110V~60Hz, Pure Sine Wave |
| USB-A Output (x3) | 5V 2.4A, 12W Max per port |
| USB-A Output (x1) | 5V 3A, 9V 2A, 12V 1.5A, 18W Max |
| USB-C Output (x2) | 5V 3A, 9V 3A, 12V 3A, 15V 3A, 20V 3A, 20V 5A, 100W Max per port |
| DC5521 Output (x2) | 12V 10A, 120W Max in total |
| Car Charger (x1) | 12V 10A, 120W Max in total |
Input Ports
| Port | Specification |
|---|---|
| AC Input (x1) | 90-120V, 700W Max |
| DC Input (x1) | 12-20V, 200W Max |
| Anderson Input (x1) | 10-50V, 300W Max |
| Support VTOMAN VS220 Solar Panel | Determined by solar light intensity |
| Applicable solar panel models | VTOMAN VS220 |
Environmental Operating Temperature
| Condition | Temperature Range |
|---|---|
| Operating Temperature | -20°C~55°C (-4°F to 131°F) |
| Recharging Temperature | 0°C~55°C (32°F to 131°F) |
Product Details Diagram

LCD Screen Introduction
The LCD screen displays the remaining battery percentage, input/output power in Watts, and indicators for DC, Type-C, USB, and AC outputs.
Operating Instructions
Power & Function On/Off
- Power On: Short press any button to power on the product. The LCD screen will light up, and the battery level indicator icon will display.
- Power Off: Turn off all outputs manually. The product will then enter standby state and shut down after 30 minutes.
- AC Output On/Off: Short press the AC Button to use the AC output. Short press it again to turn it off.
- DC Output On/Off: Short press the DC Button to use the 12V DC output. Short press it again to turn it off.
- USB-A & USB-C On/Off: Short press the USB Button to use the USB-A & USB-C output. Short press it again to turn it off.
V-Beyond Technology
This technology allows the FlashSpeed 1000 to run devices over 1000 watts but no more than 2000 watts. It lowers the output voltage to prevent tripping the overload protection, enabling continuous operation for resistive loads such as lights, space heaters, toasters, ovens, and coffee makers. Note that it is NOT suitable for complex electronics like computers, TVs, or refrigerators.

Recharge Methods & Recharge Time
Before initial use, ensure your FlashSpeed 1000 power station is fully charged.
| Method | Recharge Time |
|---|---|
| Wall Outlet (AC Adapter 700W) | 70 Mins |
| Car Outlet | 7-8 Hrs |
| 200W Solar Panels | 4-6 Hrs (depending on sunlight intensity) |

Recharge by AC Outlet
Use the provided AC charging cable through the AC Input Port to recharge. Recharging time is approximately 70 minutes.
Recharge by Car Outlet
Use the car charging cable through the DC Input Port. Recharging time is approximately 7-8 hours.
Recharge by Solar Panel
Connect a VTOMAN VS220 220W Solar Panel to recharge. Recharging time is approximately 4-6 hours, depending on sunlight intensity. If using your own solar panel, ensure its working voltage is between 10-50V and it has an Anderson adapter (or is converted to one).

Battery Capacity Expansion
The FlashSpeed 1000 can expand its battery capacity from 828Wh to 2376Wh by connecting a FlashSpeed 1500 Extra Battery (sold separately). Connect the power station to the extra battery via a CP3500 cable (included with the FlashSpeed 1500 Extra Battery).

Warning: The CP3500 cable may get hot during operation. DO NOT touch the CP3500 cable to avoid scalding.
Use of LED Flashlight
The FlashSpeed 1000 features a LED flashlight with 5 modes:
- Weak Light Mode: Short press the LED button once.
- Medium Light Mode: Press the LED button twice.
- Strong Light Mode: Press the LED button three times.
- Strobe Mode: Press the LED button four times.
- SOS Mode: Press the LED button five times. Press the LED button again to turn the light off.
Uninterruptible Power Supply (UPS)
To use the UPS function, connect the Power Station to a wall outlet with the AC charging cable. Then, press the AC button and connect your devices via the AC output ports. This provides continuous power during outages.
Storage & Maintenance
- Before storing, turn off the product. Store it in a dry, ventilated place at room temperature, away from water, heat, and other metal objects.
- For long-term storage, discharge the battery to about 60%-80% before storing. Recharge it every 2 to 3 months to extend its battery life.
- When using the battery daily, it is recommended to charge it to about 90% and discharge to about 10%.
- Use or store the product in an environment temperature between 68°F to 86°F (20°C to 30°C). For safety, do not store the product in an environment temperature higher than 113°F (45°C) or lower than 14°F (-10°C) for a long time.
- To clean the product, gently wipe it with a dry, soft, clean cloth or paper towel.
Troubleshooting
| Problem | Cause | Solution |
|---|---|---|
| Product has no output power. | Your device is not connected to the power station well. | Check the connection between the power station and your device. Make sure it's well connected. |
| Output switch is not turned on. | Turn on the AC/DC/USB output switch manually. The corresponding output method will be displayed on the display. | |
| Battery is low. | Recharge the power station fully before use. | |
| Product doesn't get a charge by AC Input. | The charger is not well connected to the power station or wall outlet. | Check the connection between the power station and the AC outlet. |
| Connection is well, but the display doesn't show charging watts. | Contact Vtoman customer service at service.us@vtoman.com. | |
| Product doesn't get a charge by Solar Input. | Solar panels are not placed under direct sunlight. | Place the solar panel under direct sunlight to get the best solar charging effect. |
| The solar panel is not compatible with the power station. | Make sure the working voltage of your solar panel is between 30V to 60V, or it won't charge the power station. |
User Tips
- The FlashSpeed 1000 is confirmed by buyers to work well with both 110V and 220V appliances, delivering stable output for international use.
- It successfully powers various devices including refrigerators, routers, and water pumps without issues. Its 2000W peak output can handle tools like a typical soldering iron.
- For optimal battery longevity, when using the power station daily, aim to charge it to about 90% and avoid discharging below 10%.
- When connecting your own solar panel, always verify that its working voltage is between 10-50V for proper recharging.
- An official user manual in PDF format is available for download: VTOMAN FlashSpeed 1000 User Manual (PDF).
Warranty & Support
Warranty Information
VTOMAN warrants to the original consumer that VTOMAN products will be free from defects in workmanship and materials under normal use during the applicable warranty period. This warranty is provided for products purchased through Amazon or the Vtoman website.
Warranty Period
The warranty period for the VTOMAN portable power station is 24 months. Consumers must provide a sales receipt or other reasonable documentary proof of the first purchase to determine the start date of the warranty period. Under normal circumstances, the warranty period is calculated from the date of purchase by the original consumer.
Exchange
If VTOMAN products cannot be operated due to defects in workmanship or materials during the applicable warranty period, Vtoman will provide free replacement and bear the freight. The replacement product will carry the remaining warranty period of the original product.
Exclusions
VTOMAN's warranty does not apply to:
- Misuse, abuse, modification, accidental damage, or use for any purpose other than those authorized in the current product information of VTOMAN.
- Attempts to repair by anyone outside an authorized organization.
- Appearance damage due to normal use.
- Non-original consumer purchasers.
- Battery cells (specific components).
Contact Us
If you have any questions or require support regarding your VTOMAN product, please feel free to contact us at service.us@vtoman.com.