1. Introduction
Thank you for purchasing the IRALAN CY01-FAN Ceiling Fan with Light. This manual provides detailed instructions for the safe installation, operation, and maintenance of your new ceiling fan. Please read this manual thoroughly before installation and keep it for future reference.

Image 1: IRALAN CY01-FAN Ceiling Fan with Light installed in a room.
2. Safety Instructions
WARNING: To reduce the risk of fire, electric shock, or personal injury, always follow these basic precautions:
- Before starting installation, ensure electricity is turned off at the circuit breaker or fuse box.
- All wiring must be in accordance with the National Electrical Code and local electrical codes. Electrical installation should be performed by a qualified, licensed electrician.
- Do not use this fan with any solid-state fan speed control device to reduce the risk of electric shock and fire.
- Mount to an outlet box marked "Acceptable for Fan Support of 45 kg (99.12 lbs) or less" and use the mounting screws provided with the outlet box. Most outlet boxes commonly used for lighting fixtures are not suitable for fan support and may need to be replaced.
- The outlet box and support structure must be securely mounted and capable of reliably supporting a minimum of 45 kg. Use only UL Listed outlet boxes marked "FOR FAN SUPPORT".
- The fan must be mounted with a minimum distance of 7 feet from the blade's trailing edge to the floor.
- Avoid placing objects in the path of the blades.
- To avoid personal injury or damage to the fan and other items, be careful when working around or cleaning the fan.
- Do not use water or detergents to clean the fan or fan blades. A dry dust cloth or slightly dampened cloth will be suitable for most cleaning.
- After making electrical connections, spliced conductors should be turned upward and pushed carefully into the outlet box. Wires should be separated, with the ground conductor and the equipment grounding conductor on one side of the outlet box.
- Electrical diagrams are for reference only.
- The fan is suitable for indoor use only.
3. Package Contents
Carefully unpack your fan and check the contents. You should have the following items:
- Mounting Bracket
- Motor Assembly
- Motor Housing
- Fan Blades (3x)
- Blade Screws
- Decorative Cover
- Remote Control
- Receiver
- Light Kit (if applicable)
- Hardware Pack (screws, wire nuts, etc.)
- User Manual (this document and PDF)
4. Setup and Installation
4.1. Tools Required
- Phillips Screwdriver
- Flat-blade Screwdriver
- Adjustable Wrench
- Pliers
- Wire Strippers
- Electrical Tape
- Step Ladder
4.2. Mounting Bracket Installation
To prevent personal injury and damage, ensure the hanging location allows the blade a clearance of 7.5 feet (2.3 meters) from the floor and 18 inches (45.72 centimeters) from any wall or obstruction.
For Concrete Ceiling:
- First mark the position for the ceiling fan.
- Drill two holes in the ceiling to help secure the ceiling bracket with two provided expansion screws.
- Secure the mounting bracket to the building structure with two provided expansion screws and tighten the screws.
For Wooden Ceiling:
- First mark the position for the ceiling fan.
- Secure the mounting bracket to the building structure with the four provided wood screws.
NOTE: The hook after installation must be able to support a weight of 45 kg or more.
4.3. Receiver Installation
- Install the Motor: Unscrew the four screws from the ceiling mounting bracket, connect the bracket, and secure it to the motor with the screws.
- Install the Remote Control Receiver: Connect the motor wires and receiver wires to the corresponding colors. (Refer to the remote control manual for specific wiring details).
- Install the Cover: Place the cover on the motor, rotate it to the right, and secure it to the mounting bracket.
4.4. Electrical Connections
Make electrical connections from the house wiring and motor to the remote receiver as shown in the diagram below. Ensure all connections are secure using wire nuts.

Image 2: Wiring diagram showing connections from house, motor, and receiver. (Note: Receiver must match the same control code).
| From House | To Receiver | From Motor |
|---|---|---|
| Black (Live) | Black (Live In) | Red (Motor Live) |
| White (Neutral) | White (Neutral In) | Blue (Light Live) |
| Green/Bare (Ground) | Green/Bare (Ground) | (Connect to fan ground) |
Note: The remote receiver must correspond to the same control code as the remote control.
4.5. Blade Installation
- Attach each fan blade to the motor assembly using the provided blade screws. Ensure all three blades are securely fastened.
4.6. Light Kit Installation (if applicable)
- After securing the blades, install the light kit to the motor assembly.
- Connect the LED wire ends from the light kit to the corresponding wires from the fan motor.
- Secure the decorative cover or glass shade by rotating it into place.
5. Operating Instructions
Your IRALAN ceiling fan comes with a remote control for convenient operation of all functions.

Image 3: Fan speed recommendations for Sleeping (Level 1-2), Entertainment (Level 3-4), and Sports (Level 5-6).
5.1. Remote Control Functions
- ON/OFF: Turns the fan and light on or off.
- Light Control: Toggle between different light color temperatures (Warm Light 3000K, Natural Light 4000K, Cold Light 6000K).
- Fan Speed: Adjust fan speed from 1 (lowest) to 6 (highest).
- Sleep Wind (1-2)
- Natural Wind (3-4)
- Strong Wind (5-6)
- Timer: Set the fan to turn off automatically after 1H, 2H, or 4H.
- Forward/Reverse (Summer/Winter Mode): Switches the wind direction.

Image 4: Reversible motor function. Summer Mode pushes air down for cooling, Winter Mode pulls air up to circulate warm air.
5.2. Light Settings
The integrated 18W LED light offers three color temperature options to suit your mood and needs:
- Warm Light (3000K): For a cozy and relaxing ambiance.
- Natural Light (4000K): Ideal for general illumination and daily activities.
- Cold Light (6000K): Bright and crisp, suitable for task lighting.

Image 5: The 18W integrated LED light offers Warm (3000K), Natural (4000K), and Cold (6000K) light options.
5.3. Product Feature Video
Video 1: Overview of IRALAN Ceiling Fan features including light modes, fan speeds, and reversible motor function.
6. Maintenance
- Cleaning: Periodically clean your fan. Use a soft, dry cloth to wipe down the motor housing and blades. Do not use water or abrasive cleaners as they may damage the finish or electrical components.
- Tightness: Check all screws and connections periodically to ensure they are secure. Over time, vibrations can cause screws to loosen.
- Light Source: The LED light source is integrated. If it requires service, please contact customer support.
7. Troubleshooting
7.1. Fan Does Not Start
- Check the circuit fuses or breakers.
- Check line wire connections to the fan and switch wire connections within the switch housing. WARNING: Ensure main power is off.
- If, after turning on the fan, pressing the remote yields no response and the fan emits a beep, do not press the remote multiple times. Immediately turn off the power and check if the cable between the motor and receiver is loose. Or remove and reinstall it.
7.2. Fan is Noisy
- Ensure all screws on the motor body are tightly secured.
- Ensure the screws that attach the fan blade bracket to the motor hub are tightly secured.
- Ensure wire nut connections are not rubbing against each other or the inner wall of the switch housing. WARNING: Ensure main power is off.
- Allow a "break-in" period of 24 hours. Most noises associated with a new fan will disappear during this time.
- If an optional light kit is used, ensure the screws securing the glass are tight. Also check that the light bulb is secure.
- Some fan motors are sensitive to signals from solid-state variable speed controls. If you have installed this type of control, choose and install another type of control.
- Ensure the top of the canopy is a short distance from the ceiling. It should not touch the ceiling.
- If the above method still does not solve the problem, please contact the manufacturer.
8. Specifications
| Feature | Specification |
|---|---|
| Brand Name | IRALAN |
| Model Number | CY01-FAN |
| Item Type | Ceiling Fans |
| Blade Size | 42 inch (105cm) / 52 inch (132cm) |
| Installation Method | Assembly (Flush Mount) |
| Control Method | REMOTE CONTROL |
| Switch Type | REMOTE CONTROL |
| Is Dimmable | Yes (Light Color Temperature) |
| Light Source | LED (Integrated 18W) |
| Luminous Flux | 249-2000 lumens |
| Is Bulbs Included | Yes |
| Number of Lights | 1 pcs |
| Power Source | AC |
| Body Material | ABS, Aluminum, Copper |
| Style | Modern Style |
| Weight | 4.2KG |
| Certification | CCC, CE |
| Origin | Mainland China |
| Recommended Room Size | 12ft x 12ft to 18ft x 18ft |

Image 6: Dimensions of the ceiling fan (8.7 inches/22cm height, 42 inches/105cm or 52 inches/132cm diameter) and recommended room size.
9. User Tips
Based on user experiences, here are some helpful tips for your IRALAN Ceiling Fan:
- Quiet Operation: Many users praise the fan for its quiet operation, even at higher speeds. If you notice any noise, ensure all screws are tightened, especially after initial installation.
- Easy Installation: The fan is generally considered easy to install due to its lightweight plastic blades and simple parts. An hour is often sufficient for installation, even for beginners.
- Airflow: Users find the airflow to be strong and effective. Level 1 or 2 is often sufficient for comfortable cooling.
- Lighting Versatility: The three light color temperatures (Warm, Natural, Cold) are highly appreciated for their versatility and brightness.
- Cost-Performance: This fan offers excellent value for money, with quality comparable to more expensive models.
- Durability: While initial quality is good, durability is best assessed over time. Regular checks of screws and connections are recommended.
10. Frequently Asked Questions (FAQ)
- Q: Is this fan AC or DC powered? Is it 110V?
- A: The fan is AC powered. Please check local voltage requirements; typically, it supports standard household voltages (e.g., 110V-240V depending on region). The specifications state "Power Source: AC".
- Q: How much do the blades measure? Is it suitable for a 25m² room?
- A: The fan comes in 42-inch (105cm) and 52-inch (132cm) blade sizes. For a 25m² room (approximately 269 sq ft), the 52-inch model would generally be more suitable for optimal air circulation. The recommended room size is 12ft x 12ft to 18ft x 18ft (approx. 13m² to 30m²).
- Q: Do you sell IRALAN spare parts?
- A: For spare parts availability, please contact the seller or IRALAN customer support directly.
11. Warranty and Support
This IRALAN ceiling fan comes with a 2-year warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims.
For detailed warranty information, technical support, or service inquiries, please refer to the full user manual PDF or contact your retailer.
For a comprehensive guide, please download the full user manual: