SinoTrack J16

Contents

SinoTrack J16 4G GPS Tracker User Manual

Model: J16

1. Introduction

The SinoTrack J16 is a compact 4G GPS tracker designed for real-time vehicle tracking. It supports 4G and 2G networks, offers remote fuel/power cut-off capabilities, geo-fencing, and various alert notifications. This manual provides detailed instructions for the installation, operation, and maintenance of your J16 GPS tracker.

SinoTrack J16 GPS Tracker with 4G+2G support, USB configuration, and 300mAh battery.

Image: SinoTrack J16 GPS Tracker. Key features include 4G+2G network support, USB configuration capability, and a 300mAh internal battery.

2. Package Contents

Please check the package for the following items:

  • SinoTrack J16 GPS Tracker Unit
  • Power Wiring Harness
  • User Manual (this document and/or PDF)
SinoTrack J16 GPS Tracker with its power wiring harness, indicating it's a 4G device with a 300mAh battery.

Image: The J16 GPS Tracker unit shown alongside its power wiring harness.

3. Specifications

Model NameJ16
Brand NameSinoTrack
Network4G + 2G
Voltage12 V
Item Size7.7 x 3.1 x 1.5 cm
Battery300mAh (1 to 4 hours battery life)
GPS TypeGPS Tracker
GPS ModuleYes
Special FeaturesInternet Connected, Remote Cut-off

4. Setup Guide

4.1. SIM Card Installation

The J16 tracker requires a 4G-compatible SIM card with data plan for full functionality. Ensure the SIM card is active and has sufficient balance/data.

  1. Locate the SIM card slot on the device.
  2. Open the device cover carefully if necessary to access the internal components.
  3. Insert the SIM card into the designated slot with the correct orientation (usually indicated by a small diagram).
  4. Ensure the SIM card is securely seated.
  5. Close the device cover.
Internal view of the J16 GPS Tracker showing SIM card slot, on/off switch, power connection, USB interface, GNSS, and 300mAh battery.

Image: Internal view of the J16 tracker. Labels indicate the SIM card slot, on/off switch, power interface, USB interface, GNSS, and the 300mAh battery.

4.2. Wiring and Installation

The J16 tracker is designed for vehicle installation. Professional installation is recommended, especially for features like remote fuel/power cut-off.

  • Red Wire: Connect to vehicle's positive power supply (+12V).
  • Black Wire: Connect to vehicle's negative power supply (Ground).
  • Yellow Wire (ACC): Connect to vehicle's ACC (Accessory) wire, which provides power when the ignition is on.
  • Orange Wire (Fuel/Power Cut-off): This wire is for connecting to a relay that controls the vehicle's fuel pump or ignition circuit. This allows for remote engine disabling. Ensure proper relay wiring and safety precautions.

Warning: Incorrect wiring can damage the device or the vehicle. Consult a professional for installation if you are unsure.

4.3. Initial Power On

After wiring, turn on the device using the internal on/off switch (if present and accessible) or by connecting the vehicle's battery. The device will power on and attempt to connect to the network and acquire GPS signal. Status indicator lights (if any) will show the device's operational status.

5. Operating Instructions

5.1. Tracking Platform and Mobile App

The SinoTrack J16 comes with a free tracking platform and mobile application for real-time monitoring, historical route playback, geo-fencing, and alert management. Refer to the packaging or official SinoTrack website for details on downloading the app and accessing the platform.

SinoTrack J16 GPS Tracker highlighting features like geo-fencing, real-time tracking, driver behavior, live alerts, analysis reports, and daily route maps.

Image: Features of the J16 tracker include geo-fencing, real-time GPS tracking, driver behavior monitoring, live alerts, analysis reports, and daily route maps.

5.2. SMS Commands

You can control and configure the J16 tracker by sending SMS commands from a registered phone number to the SIM card number in the tracker. Commands are case-sensitive and must be sent without extra spaces unless specified.

FunctionCommandDescription
Query Device StatusCXZTReturns version, ID, IP, port, APN, GPS status, GSM signal strength.
Set Administrator Numberadmin123456 [phone_number]Sets the administrator phone number. Note the space before the number.
Arm (Vibration Alarm)SFActivates the vibration alarm.
DisarmCFDeactivates the alarm.
Restart DeviceFORMATRestarts the device. APN and IP settings remain.
Cut-off Fuel/PowerDYDisables fuel/power. Only works when GPS is valid and speed is <20KM/H or vehicle is stopped.
Restore Fuel/PowerKYRestores fuel/power to the vehicle.
Location Query (SMS)G1234Returns a Google Maps URL of the current location.
Set Sleep TimeSLEEPT,123456,10Sets sleep time to 10 minutes (default is 3 minutes). Use SLEEPT,123456,0 for no sleep mode.
APN ConfigurationNAPN=your_apn,,Configure APN settings. Example: NAPN=cmnet,,. If APN requires username/password: NAPN=your_apn,username,password.
Over-speed AlarmSZCS#SPEED=120Sets over-speed alarm to 120 km/h. Adjust value as needed.
Displacement AlarmSZCS#MOVE_SET=500Sets displacement alarm to 500 meters. Device will alert if moved beyond this distance.

For a complete list of SMS commands and advanced configurations, please refer to the official PDF user manual available at SinoTrack J16 User Manual PDF.

6. Maintenance

  • Battery: The internal 300mAh battery provides backup power. It charges automatically when connected to vehicle power.
  • Cleaning: Keep the device clean and free from dust and moisture. Use a dry, soft cloth for cleaning.
  • Environment: Avoid exposing the device to extreme temperatures, direct sunlight for prolonged periods, or corrosive substances.
  • Firmware: Periodically check the SinoTrack official website for any firmware updates.

7. Troubleshooting

  • Device Not Powering On: Check power connections (red and black wires) to ensure they are secure and receiving power.
  • No GPS Signal: Ensure the device has a clear view of the sky. Metal obstructions can block GPS signals. Allow a few minutes for initial GPS fix.
  • No Network Connection: Check if the SIM card is correctly inserted, active, and has sufficient data/balance. Verify APN settings are correct.
  • SMS Commands Not Working: Ensure the command format is correct (case-sensitive, no extra spaces). Check if the sending phone number is registered as an administrator.
  • Inaccurate Location: This can happen in areas with weak GPS signals (e.g., indoors, dense urban areas). The device may use LBS (Location Based Service) which is less accurate.

8. User Tips

  • App Availability: The SinoTrack tracking platform typically offers mobile applications for both Android and iOS (iPhone) devices. Search for "SinoTrack" in your device's app store.
  • SIM Card Choice: Consider using a SIM card from a provider with good 4G coverage in your area for optimal performance.
  • Hidden Installation: For security, install the tracker in a discreet location within the vehicle, ensuring it still has good GPS signal reception.

9. Warranty and Support

For warranty information, technical support, or further assistance, please refer to the documentation provided with your purchase or visit the official SinoTrack website. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.